Oteco Reset Relief Valve (RRV), 2 in, 400 to 5,000 psi

Oteco Type RR reset relief valves, 2 in, 400 to 5,000 psi: snap-open, manual release, no shear pins, ±5 % — 26 part numbers with line pipe, flanged and Fig. 1502 union ends. Authorised Oteco distributor, UAE stock.
Key features
- Valve Type: Pressure relief valve, manual reset (no shear pins)
- Nominal Size: 2 in
- End Connection (Inlet): Line pipe thread, API flange, Fig. 1502 union and combinations
- Service Class: Standard, sour gas (H2S), low temperature
- Valve type
- Pressure relief valve, manual reset (no shear pins)
- Nominal size
- 2 in
- Service
- Standard, sour gas (H2S), low temperature
Product description
The Oteco Type RR reset relief valve (RRV) protects mud pumps and mud manifolds without shear pins. When pressure passes the set point the valve snaps fully open; it can also be opened by hand with the release button, and the button position shows whether the valve is open or closed. The set pressure is read on an indicator (psi, bar or kPa scales) and adjusted by turning one nut on top of the valve. Vibration does not move the setting, and the fully enclosed bonnet keeps its grease. Accuracy is about ±5 %.
This listing covers the 2-inch Type RR valves for set ranges between 400 and 5,000 psi (28–350 bar), with line pipe, flanged and Figure 1502 union ends. The 2-inch valve has Gullite-plated bonnet components and piston.
Construction
- Stainless steel piston and cadmium-plated sub; single-piece subs for fewer seals and parts.
- Standard and sour gas (H2S) service; low-temperature versions in the size table.
- Oteco states that the RRV bonnet assembly is interchangeable with Cameron Type A and Type B reset relief valves, and offers exchange and rebuilding of Oteco, Cameron Type A and Type B bonnet assemblies.
- Union ends are made to mate with FMC Weco Figure 1502 unions (Oteco Engineering Bulletin EB-004).
General information
Oteco reset relief valve general information (RRV brochure); all rated −20 °F to 250 °F
| Size | Max. pressure | Ends | Flow area | Weight |
|---|---|---|---|---|
| 2" | 5,000 psi (345 bar) | 2" LPT | 1.8 in² (11.6 cm²) | 50 lb (22.6 kg) |
| 2" | 5,000 psi (345 bar) | 2" Fig. 1502 | 1.8 in² (11.6 cm²) | 56 lb (25.4 kg) |
| 2" | 5,000 psi (345 bar) | 2" flanged | 1.8 in² (11.6 cm²) | 70 lb (31.7 kg) |
| 3" | 5,000 psi (345 bar) | 3" LPT | 4.2 in² (27.1 cm²) | 105 lb (47.6 kg) |
| 3" | 5,000 psi (345 bar) | 3" Fig. 1502 | 4.2 in² (27.1 cm²) | 120 lb (54.4 kg) |
| 3" | 5,000 psi (345 bar) | 3" flanged | 4.2 in² (27.1 cm²) | 140 lb (63.5 kg) |
| 3" | 8,000 psi (552 bar) | 3" Fig. 1502 | 4.9 in² (31.6 cm²) | 325 lb (147.4 kg) |
| 3" | 8,000 psi (552 bar) | 3" flanged | 4.9 in² (31.6 cm²) | 367 lb (166.5 kg) |
Install with a discharge line rated for the full inlet pressure and anchored against the reaction force (Oteco Engineering Bulletin EB-001). Each valve has its own installation and maintenance manual, which we send with the valve.
Parts: RRV repair kits and seals and RRV spare parts.
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Valve type | Pressure relief valve, manual reset (no shear pins) |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Nominal size | 2 in |
| End connections | Line pipe thread, API flange, Fig. 1502 union and combinations |
Performance
| Parameter | Value |
|---|---|
| Set pressure range | 400 to 5,000 psi |
| Accuracy | ±5 % (Oteco) |
| Temperature range | −20 °F to 250 °F (−29 °C to 121 °C) |
| Service | Standard, sour gas (H2S), low temperature |
Compliance
| Parameter | Value |
|---|---|
| Approvals | ABS design assessment and DNV approval on selected models |
Compatibility
| Parameter | Value |
|---|---|
| Interchangeability | Bonnet assembly interchanges with Cameron Type A and Type B (Oteco) |
Shipping & lead time
Sizes & part numbers
26 sizes- Indus part no.IH-OTC-130200
- Size
- 2"
- Set range
- 400–1,500 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Stainless trim
- Indus part no.IH-OTC-130201
- Size
- 2"
- Set range
- 750–2,500 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Stainless trim
- Indus part no.IH-OTC-130202
- Size
- 2"
- Set range
- 400–1,500 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Bronze trim
- Indus part no.IH-OTC-130203
- Size
- 2"
- Set range
- 750–2,500 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Bronze trim
- Indus part no.IH-OTC-130208
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2-1/16" 5,000 psi API flange inlet × 2" line pipe thread outlet
- Service
- Standard
- Indus part no.IH-OTC-130209
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2-1/16" 5,000 psi API flange inlet × 2" line pipe thread outlet
- Service
- Standard
- Indus part no.IH-OTC-130211
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2-1/16" 5,000 psi API flange inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130212
- Size
- 2"
- Set range
- 400–1,500 psi
- End connections
- 2-1/16" 5,000 psi API flange inlet and outlet
- Service
- Standard
Show all 26 sizesShow fewer sizes
- Indus part no.IH-OTC-130213
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2-1/16" 5,000 psi API flange inlet and outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130215
- Size
- 2"
- Set range
- 400–1,500 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130216
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" Fig. 1502 union, male inlet × 2" line pipe thread outlet
- Service
- Standard
- Indus part no.IH-OTC-130225
- Size
- 2"
- Set range
- 750–2,500 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130227
- Size
- 2"
- Set range
- 750–2,500 psi
- End connections
- 2" Fig. 1502 union, female inlet × female outlet
- Service
- Standard
- Indus part no.IH-OTC-130228
- Size
- 2"
- Set range
- 750–2,500 psi
- End connections
- 2" Fig. 1502 union, female inlet × male outlet
- Service
- Standard
- Indus part no.IH-OTC-130230
- Size
- 2"
- Set range
- 7–17 MPa (metric scale)
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130235
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Bronze trim
- Indus part no.IH-OTC-130236
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Stainless trim
- Indus part no.IH-OTC-130250
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130252
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" Fig. 1502 union, female inlet × male outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130256
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" Fig. 1502 union, male inlet × female outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130279
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" Fig. 1502 union, female inlet × male outlet
- Service
- Standard
- Indus part no.IH-OTC-130346
- Size
- 2"
- Set range
- to 350 bar (metric scale)
- End connections
- 2-1/16" 5,000 psi API flange inlet and outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130355
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130359
- Size
- 2"
- Set range
- to 350 bar (metric scale)
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130361
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" Fig. 1502 union, female inlet × 2-1/16" 5,000 psi API flange outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130365
- Size
- 2"
- Set range
- 1,500–5,000 psi
- End connections
- 2" Fig. 1502 female union inlet and outlet
- Service
- Sour gas (H2S)
Size — Nominal pipe size (NPS), as published. Set range — Range the relief pressure can be set within, as published. It is not the body rating. End connections — Inlet and outlet end connections, as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
End connections are listed as the manufacturer builds them for each part number. A threaded or union end can carry a lower working pressure than the valve body, so we confirm the rating for the connection you order with the quotation.
What is an Oteco 2-inch Type RR reset relief valve?▾
How do I choose between the Oteco 2-inch RRV part numbers 130200, 130201 and 130250?▾
Is the Oteco 2-inch RRV interchangeable with a Cameron Type A or Type B reset relief valve?▾
Which Oteco 2-inch RRV range covers a set pressure between 1,500 and 2,500 psi?▾
Which end connections does the Oteco 2-inch RRV come with?▾
What are the pressure and temperature limits of the Oteco 2-inch RRV?▾
Is there a sour gas (H2S) version of the Oteco 2-inch RRV?▾
Which Oteco 2-inch RRV approvals apply: ABS or DNV?▾
Where do I find repair kits and spares for the Oteco 2-inch RRV?▾
How do I install and reset an Oteco 2-inch RRV?▾
Where is the Oteco 2-inch reset relief valve made?▾
Can I buy the Oteco 2-inch RRV from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






