Oteco Reset Relief Valve (RRV), 3 in, 3,000 to 10,000 psi

Oteco Type RR reset relief valves, 3 in, 3,000 to 10,000 psi: snap-open, manual release, no shear pins, ±5 % — 17 part numbers with flanged and Fig. 1502 union ends. Authorised Oteco distributor, UAE stock.
Key features
- Valve Type: Pressure relief valve, manual reset (no shear pins)
- Nominal Size: 3 in
- End Connection (Inlet): Line pipe thread, API flange, Fig. 1502 union and combinations
- Service Class: Standard, sour gas (H2S), low temperature
- Valve type
- Pressure relief valve, manual reset (no shear pins)
- Nominal size
- 3 in
- Service
- Standard, sour gas (H2S), low temperature
Product description
The Oteco Type RR reset relief valve (RRV) protects mud pumps and mud manifolds without shear pins. When pressure passes the set point the valve snaps fully open; it can also be opened by hand with the release button, and the button position shows whether the valve is open or closed. The set pressure is read on an indicator (psi, bar or kPa scales) and adjusted by turning one nut on top of the valve. Vibration does not move the setting, and the fully enclosed bonnet keeps its grease. Accuracy is about ±5 %.
This listing covers the heavy 3-inch Type RR valves for 3,000–8,000 psi and 4,000–10,000 psi set ranges — the high-pressure design Oteco verified at an independent laboratory and on pumps from 700 to 3,000 hp. Top cover and sub are heavily flanged, the bonnet base is stiffened, the piston is hydraulically balanced, internal surfaces are xylan coated, and no threads carry load. One-piece subs leave no cross-arms in the flow path, and the discharge port is tuned from flat to round; the flow area is 4.9 in². Main seals are polyethylene and fluoropolymer. Oteco lists 12 ABS design-assessed and 6 DNV design-assessed models in this range.
Construction
- Stainless steel piston and cadmium-plated sub; single-piece subs for fewer seals and parts.
- Standard and sour gas (H2S) service; low-temperature versions in the size table.
- Oteco states that the RRV bonnet assembly is interchangeable with Cameron Type A and Type B reset relief valves, and offers exchange and rebuilding of Oteco, Cameron Type A and Type B bonnet assemblies.
- Union ends are made to mate with FMC Weco Figure 1502 unions (Oteco Engineering Bulletin EB-004).
General information
Oteco reset relief valve general information (RRV brochure); all rated −20 °F to 250 °F
| Size | Max. pressure | Ends | Flow area | Weight |
|---|---|---|---|---|
| 2" | 5,000 psi (345 bar) | 2" LPT | 1.8 in² (11.6 cm²) | 50 lb (22.6 kg) |
| 2" | 5,000 psi (345 bar) | 2" Fig. 1502 | 1.8 in² (11.6 cm²) | 56 lb (25.4 kg) |
| 2" | 5,000 psi (345 bar) | 2" flanged | 1.8 in² (11.6 cm²) | 70 lb (31.7 kg) |
| 3" | 5,000 psi (345 bar) | 3" LPT | 4.2 in² (27.1 cm²) | 105 lb (47.6 kg) |
| 3" | 5,000 psi (345 bar) | 3" Fig. 1502 | 4.2 in² (27.1 cm²) | 120 lb (54.4 kg) |
| 3" | 5,000 psi (345 bar) | 3" flanged | 4.2 in² (27.1 cm²) | 140 lb (63.5 kg) |
| 3" | 8,000 psi (552 bar) | 3" Fig. 1502 | 4.9 in² (31.6 cm²) | 325 lb (147.4 kg) |
| 3" | 8,000 psi (552 bar) | 3" flanged | 4.9 in² (31.6 cm²) | 367 lb (166.5 kg) |
Install with a discharge line rated for the full inlet pressure and anchored against the reaction force (Oteco Engineering Bulletin EB-001). Each valve has its own installation and maintenance manual, which we send with the valve.
Parts: RRV repair kits and seals and RRV spare parts.
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Valve type | Pressure relief valve, manual reset (no shear pins) |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Nominal size | 3 in |
| End connections | Line pipe thread, API flange, Fig. 1502 union and combinations |
Performance
| Parameter | Value |
|---|---|
| Set pressure range | 3,000 to 10,000 psi |
| Accuracy | ±5 % (Oteco) |
| Temperature range | −20 °F to 250 °F (−29 °C to 121 °C) |
| Service | Standard, sour gas (H2S), low temperature |
Compliance
| Parameter | Value |
|---|---|
| Approvals | ABS design assessment and DNV approval on selected models |
Compatibility
| Parameter | Value |
|---|---|
| Interchangeability | Bonnet assembly interchanges with Cameron Type A and Type B (Oteco) |
Shipping & lead time
Sizes & part numbers
17 sizes- Indus part no.IH-OTC-131380
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Standard
- Indus part no.IH-OTC-131382
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3" Fig. 1502 union, male inlet × female outlet
- Service
- Standard
- Indus part no.IH-OTC-131383
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet, with mating hub, nut and seal ring
- Service
- Standard
- Indus part no.IH-OTC-131384
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3" Fig. 1502 union, male inlet × female outlet, with mating hub, nut and seal ring
- Service
- Standard
- Indus part no.IH-OTC-131385
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × female outlet
- Service
- Standard
- Indus part no.IH-OTC-131386
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3-1/16" 10,000 psi API flange, BX154 ring groove, inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-131387
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-131388
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3" Fig. 1502 union, male inlet × female outlet
- Service
- Sour gas (H2S)
Show all 17 sizesShow fewer sizes
- Indus part no.IH-OTC-131389
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3-1/16" 10,000 psi API flange, BX154 ring groove, inlet and outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-131392
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Sour gas (H2S), low temperature
- Indus part no.IH-OTC-131393
- Size
- 3"
- Set range
- 4,000–10,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Standard
- Indus part no.IH-OTC-131394
- Size
- 3"
- Set range
- 4,000–10,000 psi
- End connections
- 3" Fig. 1502 union, male inlet × female outlet
- Service
- Standard
- Indus part no.IH-OTC-131395
- Size
- 3"
- Set range
- 4,000–10,000 psi
- End connections
- 3-1/16" 10,000 psi API flange, BX154 ring groove, inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-131396
- Size
- 3"
- Set range
- 4,000–10,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-131397
- Size
- 3"
- Set range
- 4,000–10,000 psi
- End connections
- 3" Fig. 1502 union, male inlet × female outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-131398
- Size
- 3"
- Set range
- 4,000–10,000 psi
- End connections
- 3-1/16" 10,000 psi API flange, BX154 ring groove, inlet and outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-131399
- Size
- 3"
- Set range
- 3,000–8,000 psi
- End connections
- 3-1/16" 10,000 psi API flange inlet × 3" Fig. 1502 union male outlet
- Service
- Standard
Size — Nominal pipe size (NPS), as published. Set range — Range the relief pressure can be set within, as published. It is not the body rating. End connections — Inlet and outlet end connections, as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
End connections are listed as the manufacturer builds them for each part number. A threaded or union end can carry a lower working pressure than the valve body, so we confirm the rating for the connection you order with the quotation.
What is the Oteco 3-inch high-pressure reset relief valve for 3,000 to 10,000 psi?▾
How do I read Oteco RRV part numbers IH-OTC-131380 and 131393?▾
Does the Oteco 3-inch 8,000 psi RRV share parts with Cameron Type A and Type B?▾
Which Oteco 3-inch RRV do I need for a 3-1/16 inch 10,000 psi flanged line?▾
Which Figure 1502 versions of the Oteco 3-inch 8,000 and 10,000 psi RRV are listed?▾
What are the weight and construction of the Oteco 3-inch high-pressure RRV?▾
Is the Oteco 3-inch 8,000 and 10,000 psi RRV available for sour gas (H2S) and low temperature?▾
Which approvals does the Oteco 3-inch high-pressure RRV hold: ABS or DNV?▾
Which spares and kits fit the Oteco 3-inch 8,000 psi RRV?▾
How should I install the Oteco 3-inch high-pressure RRV?▾
Where is the Oteco 3-inch 8,000 psi reset relief valve made?▾
Do you stock the Oteco 3-inch RRV rated 3,000 to 10,000 psi?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog





