Oteco PRV Shear-Pin Relief Valve, 3 in, 500 to 7,500 psi

Oteco 3-inch shear-pin pressure relief valves (PRV), models 30525, 30550, 30575, set 500 to 7,500 psi, line pipe thread or Fig. 1502 union ends, DNV type-approved models — 7 part numbers. Authorised Oteco distributor, UAE stock.
Key features
- Valve Type: Pressure relief valve, shear-pin type
- Nominal Size: 3 in
- End Connection (Inlet): Line pipe thread; Fig. 1502 female inlet × male outlet union
- Service Class: Standard; NBR or low-temperature NBR seals
- Valve type
- Pressure relief valve, shear-pin type
- Nominal size
- 3 in
Product description
The Oteco PRV is a shear-pin pressure relief valve that protects mud pumps, discharge manifolds and other drilling equipment from over-pressure. When line pressure reaches the set point, a calibrated shear pin breaks and the valve opens fully to relieve the pump. This listing covers the 3-inch valves, models 30525, 30550, 30575, set from 500 to 7,500 psi.
How it works and how it is built
- The relief pressure is set by the number and grade of the shear pins. Oteco pins are precision ground and destructively tested in production, which gives a repeatable set point — about ±10 %.
- A metal chart on every valve gives the shear-pin selection, and a quick-release safety cover gives fast access to replace the pin after the valve has relieved.
- Hardened stainless stems and stainless liner subs resist corrosion and erosion.
- Oteco states that PRV relief valve parts are interchangeable with Cameron-style shear relief valve parts.
- Hammer-union valves have a Figure 1502 female inlet and male outlet, made to mate with FMC Weco unions; some are supplied with mating weld-on union halves. Five of the union valves carry DNV type approval (marked in the table).
Setting the relief pressure
Nominal relief pressure, psi, by shear pin (Oteco PRV brochure)
| Valve | Pins | #16 blue | #20 red | #30 grey | #40 green | #45 silver | #50 black | #60 orange |
|---|---|---|---|---|---|---|---|---|
| 2" 20513 | 1 | 500 | 625 | 750 | 875 | 1,000 | 1,125 | 1,250 |
| 2" 21027 | 1 | 1,000 | 1,250 | 1,500 | 1,750 | 2,000 | 2,250 | 2,500 |
| 2" 21050 | 1 | 1,000 | 1,250 | 1,500 | 1,750 | 2,000 | 2,250 | 2,500 |
| 2" 21050 | 2 | 2,000 | 2,500 | 3,000 | 3,500 | 4,000 | 4,500 | 5,000 |
| 2" 26010 | 1 | 6,200 | 8,600 | 10,000 | — | — | — | — |
| 3" 30525 | 1 | 500 | 625 | 750 | 875 | 1,000 | 1,125 | 1,250 |
| 3" 30525 | 2 | 1,000 | 1,250 | 1,500 | 1,750 | 2,000 | 2,250 | 2,500 |
| 3" 30550 | 1 | 1,000 | 1,250 | 1,500 | 1,750 | 2,000 | 2,250 | 2,500 |
| 3" 30550 | 2 | 2,000 | 2,500 | 3,000 | 3,500 | 4,000 | 4,500 | 5,000 |
| 3" 30575 | 1 | 1,500 | 1,875 | 2,250 | 2,625 | 3,000 | 3,375 | 3,750 |
| 3" 30575 | 2 | 3,000 | 3,750 | 4,500 | 5,250 | 6,000 | 6,750 | 7,500 |
Pins are sold in packs of ten — see Oteco PRV shear pins.
Dimensions
Dimensions, inches
| Model | Ends | A | B | C |
|---|---|---|---|---|
| 30525 / 30550 | Line pipe thread | 4-1/2 | 7-1/4 | 24 |
| 30525 / 30550 | Fig. 1502 union | 8-7/8 | 7-7/8 | 24-5/8 |
| 30575 | Fig. 1502 union | 8-7/8 | 7-7/8 | 24-5/8 |
Installing a relief valve
Oteco Engineering Bulletin EB-001 covers safe relief-valve piping: the discharge line must be rated for the full inlet pressure, anchored against the reaction force when the valve opens, and routed so the discharge stream cannot reach people or the environment. Where a line-pipe valve is listed with an end connection rated below the valve, the connection limits the working pressure.
Kits and parts: PRV spare parts and repair kits.
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Valve type | Pressure relief valve, shear-pin type |
| Manufacturer models | 30525, 30550, 30575 |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Nominal size | 3 in |
| End connections | Line pipe thread; Fig. 1502 female inlet × male outlet union |
Performance
| Parameter | Value |
|---|---|
| Set pressure range | 500 to 7,500 psi |
| Accuracy | ±10 % (Oteco) |
| Service | Standard; NBR or low-temperature NBR seals |
Construction
| Parameter | Value |
|---|---|
| Stem and liner sub | Hardened stainless steel |
Compliance
| Parameter | Value |
|---|---|
| Approvals | DNV type approval on selected union models |
Compatibility
| Parameter | Value |
|---|---|
| Interchangeability | Parts interchange with Cameron-style shear relief valves (Oteco) |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-OTC-133025
- Model
- 30525
- Size
- 3"
- Set range
- 500–2,500 psi
- End connections
- 3" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-133050
- Model
- 30550
- Size
- 3"
- Set range
- 1,000–5,000 psi
- End connections
- 3" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-133052
- Model
- 30550
- Size
- 3"
- Set range
- 1,000–5,000 psi
- End connections
- 3" Fig. 1502 female inlet and 3" Fig. 1502 male outlet, with mating weld-on union halves
- Service
- Standard
- Indus part no.IH-OTC-133055
- Model
- 30550
- Size
- 3"
- Set range
- 1,000–5,000 psi
- End connections
- 3" Fig. 1502 female inlet and 3" Fig. 1502 male outlet
- Service
- Standard, DNV type approved
- Indus part no.IH-OTC-133056
- Model
- 30525
- Size
- 3"
- Set range
- 500–2,500 psi
- End connections
- 3" Fig. 1502 female inlet and 3" Fig. 1502 male outlet
- Service
- Standard, DNV type approved
- Indus part no.IH-OTC-133057
- Model
- 30525
- Size
- 3"
- Set range
- 500–2,500 psi
- End connections
- 3" Fig. 1502 female inlet and 3" Fig. 1502 male outlet, with mating weld-on union halves
- Service
- Standard
- Indus part no.IH-OTC-133075
- Model
- 30575
- Size
- 3"
- Set range
- 1,500–7,500 psi
- End connections
- 3" Fig. 1502 female inlet and 3" Fig. 1502 male outlet
- Service
- Standard
Model — Manufacturer model code, where one listing covers several models. Size — Nominal pipe size (NPS), as published. Set range — Range the relief pressure can be set within, as published. It is not the body rating. End connections — Inlet and outlet end connections, as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
End connections are listed as the manufacturer builds them for each part number. A threaded or union end can carry a lower working pressure than the valve body, so we confirm the rating for the connection you order with the quotation.
What is the Oteco PRV 3-inch shear-pin relief valve for?▾
What do Oteco PRV models 30525, 30550 and 30575 mean, and how are IH-OTC-1330xx part numbers split?▾
Do Oteco 3-inch PRV parts interchange with Cameron-style shear relief valves?▾
Which Oteco 3-inch PRV model and pin gives a 4,000 psi relief pressure?▾
Which pin gives 6,000 psi on the Oteco PRV 30575?▾
What limits the working pressure of an Oteco 3-inch PRV on line pipe thread ends?▾
What materials are in the Oteco 3-inch PRV, and is there a sour gas version?▾
Which Oteco 3-inch PRV part numbers have DNV type approval?▾
Which shear pins and kits fit the Oteco 3-inch PRV 30550?▾
What are the face-to-face dimensions of the Oteco 3-inch PRV for piping layout?▾
What is the country of origin of the Oteco PRV 3-inch relief valve?▾
Can I get the Oteco PRV 3-inch relief valve from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog







