Oteco Reset Relief Valve (RRV), 3 in, 400 to 5,000 psi

Oteco Type RR reset relief valves, 3 in, 400 to 5,000 psi: snap-open, manual release, no shear pins, ±5 % — 29 part numbers with line pipe, flanged and Fig. 1502 union ends. Authorised Oteco distributor, UAE stock.
Key features
- Valve Type: Pressure relief valve, manual reset (no shear pins)
- Nominal Size: 3 in
- End Connection (Inlet): Line pipe thread, API flange, Fig. 1502 union and combinations
- Service Class: Standard, sour gas (H2S), low temperature
- Valve type
- Pressure relief valve, manual reset (no shear pins)
- Nominal size
- 3 in
- Service
- Standard, sour gas (H2S), low temperature
Product description
The Oteco Type RR reset relief valve (RRV) protects mud pumps and mud manifolds without shear pins. When pressure passes the set point the valve snaps fully open; it can also be opened by hand with the release button, and the button position shows whether the valve is open or closed. The set pressure is read on an indicator (psi, bar or kPa scales) and adjusted by turning one nut on top of the valve. Vibration does not move the setting, and the fully enclosed bonnet keeps its grease. Accuracy is about ±5 %.
This listing covers the 3-inch Type RR valves for set ranges between 400 and 5,000 psi (28–350 bar), with line pipe, flanged and Figure 1502 union ends. The 3-inch valve carries the same bonnet as the 2-inch model, polyethylene seals, investment-cast bonnet parts, integral outlet ends and 10,000 psi hydrostatically tested subs; Oteco lists five DNV type-approved models and describes it as comparable to the Cameron Type B.
Construction
- Stainless steel piston and cadmium-plated sub; single-piece subs for fewer seals and parts.
- Standard and sour gas (H2S) service; low-temperature versions in the size table.
- Oteco states that the RRV bonnet assembly is interchangeable with Cameron Type A and Type B reset relief valves, and offers exchange and rebuilding of Oteco, Cameron Type A and Type B bonnet assemblies.
- Union ends are made to mate with FMC Weco Figure 1502 unions (Oteco Engineering Bulletin EB-004).
General information
Oteco reset relief valve general information (RRV brochure); all rated −20 °F to 250 °F
| Size | Max. pressure | Ends | Flow area | Weight |
|---|---|---|---|---|
| 2" | 5,000 psi (345 bar) | 2" LPT | 1.8 in² (11.6 cm²) | 50 lb (22.6 kg) |
| 2" | 5,000 psi (345 bar) | 2" Fig. 1502 | 1.8 in² (11.6 cm²) | 56 lb (25.4 kg) |
| 2" | 5,000 psi (345 bar) | 2" flanged | 1.8 in² (11.6 cm²) | 70 lb (31.7 kg) |
| 3" | 5,000 psi (345 bar) | 3" LPT | 4.2 in² (27.1 cm²) | 105 lb (47.6 kg) |
| 3" | 5,000 psi (345 bar) | 3" Fig. 1502 | 4.2 in² (27.1 cm²) | 120 lb (54.4 kg) |
| 3" | 5,000 psi (345 bar) | 3" flanged | 4.2 in² (27.1 cm²) | 140 lb (63.5 kg) |
| 3" | 8,000 psi (552 bar) | 3" Fig. 1502 | 4.9 in² (31.6 cm²) | 325 lb (147.4 kg) |
| 3" | 8,000 psi (552 bar) | 3" flanged | 4.9 in² (31.6 cm²) | 367 lb (166.5 kg) |
Install with a discharge line rated for the full inlet pressure and anchored against the reaction force (Oteco Engineering Bulletin EB-001). Each valve has its own installation and maintenance manual, which we send with the valve.
Parts: RRV repair kits and seals and RRV spare parts.
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Valve type | Pressure relief valve, manual reset (no shear pins) |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Nominal size | 3 in |
| End connections | Line pipe thread, API flange, Fig. 1502 union and combinations |
Performance
| Parameter | Value |
|---|---|
| Set pressure range | 400 to 5,000 psi |
| Accuracy | ±5 % (Oteco) |
| Temperature range | −20 °F to 250 °F (−29 °C to 121 °C) |
| Service | Standard, sour gas (H2S), low temperature |
Compliance
| Parameter | Value |
|---|---|
| Approvals | ABS design assessment and DNV approval on selected models |
Compatibility
| Parameter | Value |
|---|---|
| Interchangeability | Bonnet assembly interchanges with Cameron Type A and Type B (Oteco) |
Shipping & lead time
Sizes & part numbers
29 sizes- Indus part no.IH-OTC-130315
- Size
- 3"
- Set range
- 400–1,500 psi
- End connections
- 3" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130325
- Size
- 3"
- Set range
- 750–2,500 psi
- End connections
- 3" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130344
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3-1/8" 5,000 psi API flange inlet × 3" Fig. 1502 union, male outlet
- Service
- Standard
- Indus part no.IH-OTC-130345
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3-1/8" 5,000 psi API flange inlet × 3" line pipe thread outlet
- Service
- Standard
- Indus part no.IH-OTC-130348
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3-1/8" 5,000 psi API flange inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130349
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3-1/8" 5,000 psi API flange inlet and outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130350
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130352
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3-1/8" 5,000 psi API flange inlet and outlet
- Service
- Standard
Show all 29 sizesShow fewer sizes
- Indus part no.IH-OTC-130353
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3-1/16" 10,000 psi API flange inlet × 3" line pipe thread outlet
- Service
- Standard
- Indus part no.IH-OTC-130354
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3-1/16" 10,000 psi API flange inlet × 3" line pipe thread outlet
- Service
- Standard
- Indus part no.IH-OTC-130356
- Size
- 3"
- Set range
- to 350 bar (metric scale)
- End connections
- 3" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130357
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 602 female union inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130358
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" line pipe thread inlet and outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130362
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1002 union, female inlet × 4" Fig. 1002 union, female outlet
- Service
- Standard
- Indus part no.IH-OTC-130363
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1502 female union inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130364
- Size
- 3"
- Set range
- 400–1,500 psi
- End connections
- 3" Fig. 1502 female union inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130366
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1002 union, female inlet × female outlet
- Service
- Standard
- Indus part no.IH-OTC-130367
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Standard
- Indus part no.IH-OTC-130368
- Size
- 3"
- Set range
- 750–2,500 psi
- End connections
- 3" Fig. 1502 female union inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130373
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1002 union, female inlet × male outlet
- Service
- Standard
- Indus part no.IH-OTC-130376
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130378
- Size
- 3"
- Set range
- 400–1,500 psi
- End connections
- 3-1/8" 5,000 psi API flange inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130379
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × 3" Fig. 1003 union, female outlet
- Service
- Standard
- Indus part no.IH-OTC-130381
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × 3" line pipe thread outlet
- Service
- Standard
- Indus part no.IH-OTC-130383
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1502 female union inlet and outlet
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-130384
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3-1/16" 10,000 psi API flange inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-130388
- Size
- 3"
- Set range
- 750–2,500 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Standard
- Indus part no.IH-OTC-130389
- Size
- 3"
- Set range
- 1,500–5,000 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Sour gas (H2S), low temperature
- Indus part no.IH-OTC-130390
- Size
- 3"
- Set range
- 400–1,500 psi
- End connections
- 3" Fig. 1502 union, female inlet × male outlet
- Service
- Sour gas (H2S)
Size — Nominal pipe size (NPS), as published. Set range — Range the relief pressure can be set within, as published. It is not the body rating. End connections — Inlet and outlet end connections, as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
End connections are listed as the manufacturer builds them for each part number. A threaded or union end can carry a lower working pressure than the valve body, so we confirm the rating for the connection you order with the quotation.
What is the Oteco 3-inch Type RR reset relief valve at 400 to 5,000 psi?▾
What do the Oteco 3-inch RRV part numbers 130315, 130325 and 130350 stand for?▾
Is the Oteco 3-inch RRV the same as a Cameron Type B reset relief valve?▾
Which Oteco 3-inch RRV do I need for a 5,000 psi line with a 3-1/8 inch API flange?▾
Which Figure 1502 versions of the Oteco 3-inch RRV are listed?▾
What is the maximum pressure, flow area and weight of the Oteco 3-inch RRV at 5,000 psi?▾
Is the Oteco 3-inch RRV available for sour gas (H2S) and low temperature?▾
Which Oteco 3-inch RRV models are DNV type approved?▾
Which seals and spares fit the Oteco 3-inch RRV?▾
What is the difference between the 3-inch 5,000 psi RRV and the heavier 8,000 psi RRV?▾
What is the origin of the Oteco 3-inch reset relief valve?▾
Do you stock the Oteco 3-inch RRV, 400 to 5,000 psi, in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Drilling rig equipment
Oteco drilling and wellsite equipment: the range, and how to order it in the Middle East
Oteco Inc. of Houston makes the consumable and wear parts of a drilling rig: mud gate valves, relief valves, gauges, pump pistons, float valves, wipers, BOP rubbers and more. A guide to the range by family, how to identify a part, and how to order it from an authorised Oteco distributor in the UAE.
6 min read
Drilling rig equipment
Shear-pin or reset relief valve: protecting a mud pump with a PRV or an RRV
Oteco makes two relief valves for mud pumps and manifolds. The PRV opens when a calibrated shear pin breaks and must be re-pinned. The RRV snaps open at its set pressure, can be opened by hand and needs no pins. How each works, how the set pressure is chosen, and which to specify.
5 min read






