Skip to content
OTECOIH-OTC-PG8-SW· MADE IN UNITED STATES

Oteco Model 8 Pressure Gauge, Salt Water Service

HP Pressure GaugesEx-stock · delivery in 3 days
Oteco Model 8 pressure gauge with yellow case and dial window — salt water trim listing
VIEW 01·Oteco Model 8 pressure gauge with yellow case and dial window — salt water trim listing

Oteco Model 8 drilling pressure gauges, salt water trim: 8-1/8 in dial case, ranges to 10,000 psi, psi, bar, kPa and kg/cm² dials, threaded, flanged and hammer-union subs — 23 part numbers. Authorised Oteco distributor, UAE stock.

Key features

  • Product type: Drilling pressure gauge, dampened
  • Model: Oteco Model 8
  • Pressure range: Up to 10,000 psi
  • Service: Salt water service
  • End connections: 2" line pipe thread male with 1" line pipe thread female; API flange; Fig. 1502 / 2002 / 2202 union
Product type
Drilling pressure gauge, dampened
Model
Oteco Model 8
Service
Salt water service
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The Oteco Model 8 is a heavy-duty drilling and production pressure gauge for standpipe, mud pump, choke and kill, cementing and well-testing lines. Its dial case is 8-1/8 in across and it stands about 13-1/4 in tall on the standard threaded sub; ranges run to 10,000 psi. This listing covers the salt water service gauges — 23 part numbers, each a combination of dial range and unit (psi, bar, kPa or kg/cm²), standard or luminous dial face, and end connection.

The Model 8 has a large 6-inch dial behind an impact-resistant acrylic lens, and is the model offered with dual-unit dials (psi with kg/cm², or bar or kPa with psi).

How the gauge is built

  • A built-in dampener protects the movement from pump pulsation and mechanical shock.
  • Heavy-duty seals keep line fluid out of the mechanism, which runs in a special oil for temperature, vibration and shock resistance.
  • A low-pressure plug on the back protects the case and lens.
  • Subs are threaded (standard: 2" line pipe thread male with 1" line pipe thread female), API flanged — with stainless or Inconel-inlaid ring grooves on request — or hammer-union, made to mate with FMC Weco Figure 1502, 2002 and 2202 unions.
  • Trims for standard mud, salt water and sour gas; this listing is the salt water trim.

Rating

The maximum pressure of a gauge is the lower of its dial range and the rating of its sub end connection — a 2-inch line-pipe sub is limited to 6,000 or 10,000 psi depending on the sub. Oteco rates the gauges for −20 °F to 250 °F (−29 °C to 121 °C). ABS and DNV unit certification is available on request.

Rebuilding

Oteco rebuilds and refurbishes its gauges and most Cameron-style gauges to like-new condition; we arrange the exchange.

Other Oteco gauges

Supply from the UAE

Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.

Identification

ParameterValue
Product typeDrilling pressure gauge, dampened
ModelOteco Model 8
MakerOteco Inc., Houston, Texas, USA

Performance

ParameterValue
Pressure rangeUp to 10,000 psi
Dial unitspsi, bar, kPa, kg/cm²; dual-unit dials
ServiceSalt water service
Temperature range−20 °F to 250 °F (−29 °C to 121 °C)

Dimensions

ParameterValue
Dial case8-1/8 in
End connections2" line pipe thread male with 1" line pipe thread female; API flange; Fig. 1502 / 2002 / 2202 union

Compliance

ParameterValue
CertificationABS and DNV unit certification on request

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in United States

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this range

Instrumentation & gauges

Pressure gauges: how they work, accuracy grades and classes, safety patterns and how to choose one

A pressure gauge is a curved tube that tries to straighten, a few gears, and a pointer — and choosing the right one means getting range, accuracy, fill, connection, wetted material and case pattern all right at once. How Bourdon and diaphragm gauges work, what ASME grades and EN 837 classes actually promise, safety-pattern cases, installation and calibration.

9 min read

Instrumentation & gauges

How to choose a pressure gauge range: the middle-third rule, pulsation, overpressure and accuracy

A gauge pinned near full scale wears out and lies; a gauge with a range ten times the pressure cannot be read. The middle-third rule, how much of the scale small and large gauges may use under steady and pulsating pressure, overpressure limits, how range and accuracy class combine into an error in real units, and what to do about pulsation — with worked examples.

6 min read

Instrumentation & gauges

Glycerine-filled vs dry pressure gauges: when to fill, which fluid, and the venting rule

Filling a gauge with glycerine or silicone damps the pointer, protects the movement from vibration and keeps moisture out — and makes the gauge dangerous on oxygen and inaccurate if the case is not vented. When a filled gauge is worth it, how glycerine, silicone and halocarbon fills differ, temperature limits, the venting rule for low ranges, and the alternatives when fill is not enough.

5 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at