Oteco Model 7 Pressure Gauge, Salt Water Service

Oteco Model 7 drilling pressure gauges, salt water trim: 7-5/8 in dial case, ranges to 6,000 psi, psi, bar, kPa and kg/cm² dials, threaded, flanged and hammer-union subs — 26 part numbers. Authorised Oteco distributor, UAE stock.
Key features
- Product type: Drilling pressure gauge, dampened
- Model: Oteco Model 7
- Pressure range: Up to 6,000 psi
- Service: Salt water service
- End connections: 2" line pipe thread female; API flange; Fig. 1502 / 2002 / 2202 union
- Product type
- Drilling pressure gauge, dampened
- Model
- Oteco Model 7
- Service
- Salt water service
Product description
The Oteco Model 7 is a heavy-duty drilling and production pressure gauge for standpipe, mud pump, choke and kill, cementing and well-testing lines. Its dial case is 7-5/8 in across and it stands about 14-3/4 in tall on the standard threaded sub; ranges run to 6,000 psi. This listing covers the salt water service gauges — 26 part numbers, each a combination of dial range and unit (psi, bar, kPa or kg/cm²), standard or luminous dial face, and end connection.
Oteco states that the Model 7 is interchangeable with the Cameron Type D, Totco Type 4, Geosource Type D, Wadeco Model 12 and Gauges International Model 7 gauges.
How the gauge is built
- A built-in dampener protects the movement from pump pulsation and mechanical shock.
- Heavy-duty seals keep line fluid out of the mechanism, which runs in a special oil for temperature, vibration and shock resistance.
- A low-pressure plug on the back protects the case and lens.
- Subs are threaded (standard: 2" line pipe thread female), API flanged — with stainless or Inconel-inlaid ring grooves on request — or hammer-union, made to mate with FMC Weco Figure 1502, 2002 and 2202 unions.
- Trims for standard mud, salt water and sour gas; this listing is the salt water trim.
Rating
The maximum pressure of a gauge is the lower of its dial range and the rating of its sub end connection — a 2-inch line-pipe sub is limited to 6,000 or 10,000 psi depending on the sub. Oteco rates the gauges for −20 °F to 250 °F (−29 °C to 121 °C). ABS and DNV unit certification is available on request.
Rebuilding
Oteco rebuilds and refurbishes its gauges and most Cameron-style gauges to like-new condition; we arrange the exchange.
Other Oteco gauges
- Model 6, standard
- Model 6, sour gas
- Model 6, salt water
- Model 7, standard
- Model 7, sour gas
- Model 8, standard
- Model 8, sour gas
- Model 8, salt water
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Product type | Drilling pressure gauge, dampened |
| Model | Oteco Model 7 |
| Maker | Oteco Inc., Houston, Texas, USA |
Performance
| Parameter | Value |
|---|---|
| Pressure range | Up to 6,000 psi |
| Dial units | psi, bar, kPa, kg/cm² |
| Service | Salt water service |
| Temperature range | −20 °F to 250 °F (−29 °C to 121 °C) |
Dimensions
| Parameter | Value |
|---|---|
| Dial case | 7-5/8 in |
| End connections | 2" line pipe thread female; API flange; Fig. 1502 / 2002 / 2202 union |
Compliance
| Parameter | Value |
|---|---|
| Certification | ABS and DNV unit certification on request |
Compatibility
| Parameter | Value |
|---|---|
| Interchangeability | Cameron Type D, Totco Type 4, Geosource Type D, Wadeco Model 12 and Gauges International Model 7 (Oteco) |
Shipping & lead time
Sizes & part numbers
26 sizes- Indus part no.IH-OTC-371121
- Range
- 0–1,000 psi
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371122
- Range
- 0–1,000 psi
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371221
- Range
- 0–3,000 psi
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371222
- Range
- 0–3,000 psi
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371321
- Range
- 0–5,000 psi
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371322
- Range
- 0–5,000 psi
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371421
- Range
- 0–6,000 psi
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-372121
- Range
- 0–7,000 kPa
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
Show all 26 sizesShow fewer sizes
- Indus part no.IH-OTC-372122
- Range
- 0–7,000 kPa
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-372221
- Range
- 0–21,000 kPa
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-372222
- Range
- 0–21,000 kPa
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373121
- Range
- 0–70 bar
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373122
- Range
- 0–70 bar
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373221
- Range
- 0–210 bar
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373222
- Range
- 0–210 bar
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373321
- Range
- 0–350 bar
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373421
- Range
- 0–420 bar
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373422
- Range
- 0–420 bar
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374121
- Range
- 0–70 kg/cm²
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374122
- Range
- 0–70 kg/cm²
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374221
- Range
- 0–210 kg/cm²
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374222
- Range
- 0–210 kg/cm²
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374321
- Range
- 0–350 kg/cm²
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374322
- Range
- 0–350 kg/cm²
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374421
- Range
- 0–420 kg/cm²
- Dial face
- Standard
- Service
- Salt water
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374422
- Range
- 0–420 kg/cm²
- Dial face
- Luminous
- Service
- Salt water
- End connection
- 2" line pipe thread female
Range — Dial range and unit, as printed on the dial face. Dial face — Dial face style — standard, luminous, or dual units — as published. Service — Service trim — standard, sour gas (H2S), salt water — as published. End connection — End connection, as published. Ask us for the dimension drawing if you need it stamped.
What is the Oteco Model 7 salt water service pressure gauge?▾
How are Oteco Model 7 salt water part numbers such as IH-OTC-371121 and 374422 arranged?▾
Is the Oteco Model 7 salt water gauge a Cameron Type D or Totco Type 4 replacement?▾
Which ranges does the Oteco Model 7 salt water gauge cover?▾
Which sub connection does the Oteco Model 7 salt water gauge have?▾
What are the pressure and temperature limits of the Oteco Model 7 salt water gauge?▾
What does the salt water trim of the Oteco Model 7 gauge mean?▾
Is ABS or DNV unit certification available for the Oteco Model 7 salt water gauge?▾
Which fittings does the Oteco Model 7 salt water gauge connect to?▾
Can the Oteco Model 7 salt water gauge be rebuilt, and what does the dampener do?▾
Where is the Oteco Model 7 salt water gauge made?▾
Do you stock the Oteco Model 7 salt water gauge?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Instrumentation & gauges
Pressure gauges: how they work, accuracy grades and classes, safety patterns and how to choose one
A pressure gauge is a curved tube that tries to straighten, a few gears, and a pointer — and choosing the right one means getting range, accuracy, fill, connection, wetted material and case pattern all right at once. How Bourdon and diaphragm gauges work, what ASME grades and EN 837 classes actually promise, safety-pattern cases, installation and calibration.
9 min read
Instrumentation & gauges
How to choose a pressure gauge range: the middle-third rule, pulsation, overpressure and accuracy
A gauge pinned near full scale wears out and lies; a gauge with a range ten times the pressure cannot be read. The middle-third rule, how much of the scale small and large gauges may use under steady and pulsating pressure, overpressure limits, how range and accuracy class combine into an error in real units, and what to do about pulsation — with worked examples.
6 min read
Instrumentation & gauges
Glycerine-filled vs dry pressure gauges: when to fill, which fluid, and the venting rule
Filling a gauge with glycerine or silicone damps the pointer, protects the movement from vibration and keeps moisture out — and makes the gauge dangerous on oxygen and inaccurate if the case is not vented. When a filled gauge is worth it, how glycerine, silicone and halocarbon fills differ, temperature limits, the venting rule for low ranges, and the alternatives when fill is not enough.
5 min read



