Oteco Model 8 Pressure Gauge, Sour Gas Service

Oteco Model 8 drilling pressure gauges, sour gas trim: 8-1/8 in dial case, ranges to 20,000 psi, psi, bar, kPa and kg/cm² dials, threaded, flanged and hammer-union subs — 66 part numbers. Authorised Oteco distributor, UAE stock.
Key features
- Product type: Drilling pressure gauge, dampened
- Model: Oteco Model 8
- Pressure range: Up to 20,000 psi
- Service: Sour gas (H2S) service
- End connections: 2" line pipe thread male with 1" line pipe thread female; API flange; Fig. 1502 / 2002 / 2202 union
- Product type
- Drilling pressure gauge, dampened
- Model
- Oteco Model 8
- Service
- Sour gas (H2S) service
Product description
The Oteco Model 8 is a heavy-duty drilling and production pressure gauge for standpipe, mud pump, choke and kill, cementing and well-testing lines. Its dial case is 8-1/8 in across and it stands about 13-1/4 in tall on the standard threaded sub; ranges run to 20,000 psi. This listing covers the sour gas (H2S) service gauges — 66 part numbers, each a combination of dial range and unit (psi, bar, kPa or kg/cm²), standard or luminous dial face, and end connection.
The Model 8 has a large 6-inch dial behind an impact-resistant acrylic lens, and is the model offered with dual-unit dials (psi with kg/cm², or bar or kPa with psi).
How the gauge is built
- A built-in dampener protects the movement from pump pulsation and mechanical shock.
- Heavy-duty seals keep line fluid out of the mechanism, which runs in a special oil for temperature, vibration and shock resistance.
- A low-pressure plug on the back protects the case and lens.
- Subs are threaded (standard: 2" line pipe thread male with 1" line pipe thread female), API flanged — with stainless or Inconel-inlaid ring grooves on request — or hammer-union, made to mate with FMC Weco Figure 1502, 2002 and 2202 unions.
- Trims for standard mud, salt water and sour gas; this listing is the sour gas trim.
Rating
The maximum pressure of a gauge is the lower of its dial range and the rating of its sub end connection — a 2-inch line-pipe sub is limited to 6,000 or 10,000 psi depending on the sub. Oteco rates the gauges for −20 °F to 250 °F (−29 °C to 121 °C). ABS and DNV unit certification is available on request.
Rebuilding
Oteco rebuilds and refurbishes its gauges and most Cameron-style gauges to like-new condition; we arrange the exchange.
Other Oteco gauges
- Model 6, standard
- Model 6, sour gas
- Model 6, salt water
- Model 7, standard
- Model 7, sour gas
- Model 7, salt water
- Model 8, standard
- Model 8, salt water
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Product type | Drilling pressure gauge, dampened |
| Model | Oteco Model 8 |
| Maker | Oteco Inc., Houston, Texas, USA |
Performance
| Parameter | Value |
|---|---|
| Pressure range | Up to 20,000 psi |
| Dial units | psi, bar, kPa, kg/cm²; dual-unit dials |
| Service | Sour gas (H2S) service |
| Temperature range | −20 °F to 250 °F (−29 °C to 121 °C) |
Dimensions
| Parameter | Value |
|---|---|
| Dial case | 8-1/8 in |
| End connections | 2" line pipe thread male with 1" line pipe thread female; API flange; Fig. 1502 / 2002 / 2202 union |
Compliance
| Parameter | Value |
|---|---|
| Certification | ABS and DNV unit certification on request |
Shipping & lead time
Sizes & part numbers
66 sizes- Indus part no.IH-OTC-381131
- Range
- 0–1,000 psi
- Dial face
- Standard
- Service
- Sour gas (H2S)
- End connection
- 2" line pipe thread male × 1" line pipe thread female
- Indus part no.IH-OTC-381132
- Range
- 0–1,000 psi
- Dial face
- Luminous
- Service
- Sour gas (H2S)
- End connection
- 2" line pipe thread male × 1" line pipe thread female
- Indus part no.IH-OTC-381231
- Range
- 0–3,000 psi / 0–210 kg/cm²
- Dial face
- Standard, dual units
- Service
- Sour gas (H2S)
- End connection
- 2" line pipe thread male × 1" line pipe thread female
- Indus part no.IH-OTC-381232
- Range
- 0–3,000 psi / 0–210 kg/cm²
- Dial face
- Luminous, dual units
- Service
- Sour gas (H2S)
- End connection
- 2" line pipe thread male × 1" line pipe thread female
- Indus part no.IH-OTC-381431
- Range
- 0–6,000 psi / 0–420 kg/cm²
- Dial face
- Standard, dual units
- Service
- Sour gas (H2S)
- End connection
- 2" line pipe thread male × 1" line pipe thread female
- Indus part no.IH-OTC-381432
- Range
- 0–6,000 psi / 0–420 kg/cm²
- Dial face
- Luminous, dual units
- Service
- Sour gas (H2S)
- End connection
- 2" line pipe thread male × 1" line pipe thread female
- Indus part no.IH-OTC-381531
- Range
- 0–10,000 psi / 0–700 kg/cm²
- Dial face
- Standard, dual units
- Service
- Sour gas (H2S)
- End connection
- 2" line pipe thread male × 1" line pipe thread female
- Indus part no.IH-OTC-381532
- Range
- 0–10,000 psi / 0–700 kg/cm²
- Dial face
- Luminous, dual units
- Service
- Sour gas (H2S)
- End connection
- 2" line pipe thread male × 1" line pipe thread female
Show all 66 sizesShow fewer sizes
Range — Dial range and unit, as printed on the dial face. Dial face — Dial face style — standard, luminous, or dual units — as published. Service — Service trim — standard, sour gas (H2S), salt water — as published. End connection — End connection, as published. Ask us for the dimension drawing if you need it stamped.
What is the Oteco Model 8 sour gas (H2S) pressure gauge?▾
How do I read Oteco Model 8 sour gas part numbers like IH-OTC-381131 and 382193?▾
Which is better for sour gas, the Oteco Model 8 or the Model 6 sour gas gauge?▾
Which dual-unit ranges are listed for the Oteco Model 8 sour gas gauge?▾
Which flanges and unions does the Oteco Model 8 sour gas gauge offer?▾
What are the pressure and temperature limits of the Oteco Model 8 sour gas gauge?▾
Is the Oteco Model 8 sour gas gauge listed for H2S service?▾
Does the Oteco Model 8 sour gas gauge come with ABS or DNV certification?▾
Which hammer-union halves mate with the Oteco Model 8 sour gas gauge?▾
How do I service or refurbish an Oteco Model 8 sour gas gauge?▾
Where is the Oteco Model 8 sour gas gauge made?▾
Can you supply the Oteco Model 8 sour gas gauge from Dubai stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog


