Oteco Model 7 Pressure Gauge, Standard Service

Oteco Model 7 drilling pressure gauges, standard trim: 7-5/8 in dial case, ranges to 6,000 psi, psi, bar, kPa and kg/cm² dials, threaded, flanged and hammer-union subs — 38 part numbers. Authorised Oteco distributor, UAE stock.
Key features
- Product type: Drilling pressure gauge, dampened
- Model: Oteco Model 7
- Pressure range: Up to 6,000 psi
- Service: Standard service
- End connections: 2" line pipe thread female; API flange; Fig. 1502 / 2002 / 2202 union
- Product type
- Drilling pressure gauge, dampened
- Model
- Oteco Model 7
- Service
- Standard service
Product description
The Oteco Model 7 is a heavy-duty drilling and production pressure gauge for standpipe, mud pump, choke and kill, cementing and well-testing lines. Its dial case is 7-5/8 in across and it stands about 14-3/4 in tall on the standard threaded sub; ranges run to 6,000 psi. This listing covers the standard service gauges — 38 part numbers, each a combination of dial range and unit (psi, bar, kPa or kg/cm²), standard or luminous dial face, and end connection.
Oteco states that the Model 7 is interchangeable with the Cameron Type D, Totco Type 4, Geosource Type D, Wadeco Model 12 and Gauges International Model 7 gauges.
How the gauge is built
- A built-in dampener protects the movement from pump pulsation and mechanical shock.
- Heavy-duty seals keep line fluid out of the mechanism, which runs in a special oil for temperature, vibration and shock resistance.
- A low-pressure plug on the back protects the case and lens.
- Subs are threaded (standard: 2" line pipe thread female), API flanged — with stainless or Inconel-inlaid ring grooves on request — or hammer-union, made to mate with FMC Weco Figure 1502, 2002 and 2202 unions.
- Trims for standard mud, salt water and sour gas; this listing is the standard trim.
Rating
The maximum pressure of a gauge is the lower of its dial range and the rating of its sub end connection — a 2-inch line-pipe sub is limited to 6,000 or 10,000 psi depending on the sub. Oteco rates the gauges for −20 °F to 250 °F (−29 °C to 121 °C). ABS and DNV unit certification is available on request.
Rebuilding
Oteco rebuilds and refurbishes its gauges and most Cameron-style gauges to like-new condition; we arrange the exchange.
Other Oteco gauges
- Model 6, standard
- Model 6, sour gas
- Model 6, salt water
- Model 7, sour gas
- Model 7, salt water
- Model 8, standard
- Model 8, sour gas
- Model 8, salt water
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Product type | Drilling pressure gauge, dampened |
| Model | Oteco Model 7 |
| Maker | Oteco Inc., Houston, Texas, USA |
Performance
| Parameter | Value |
|---|---|
| Pressure range | Up to 6,000 psi |
| Dial units | psi, bar, kPa, kg/cm² |
| Service | Standard service |
| Temperature range | −20 °F to 250 °F (−29 °C to 121 °C) |
Dimensions
| Parameter | Value |
|---|---|
| Dial case | 7-5/8 in |
| End connections | 2" line pipe thread female; API flange; Fig. 1502 / 2002 / 2202 union |
Compliance
| Parameter | Value |
|---|---|
| Certification | ABS and DNV unit certification on request |
Compatibility
| Parameter | Value |
|---|---|
| Interchangeability | Cameron Type D, Totco Type 4, Geosource Type D, Wadeco Model 12 and Gauges International Model 7 (Oteco) |
Shipping & lead time
Sizes & part numbers
38 sizes- Indus part no.IH-OTC-371111
- Range
- 0–1,000 psi
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371112
- Range
- 0–1,000 psi
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371211
- Range
- 0–3,000 psi
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371212
- Range
- 0–3,000 psi
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371311
- Range
- 0–5,000 psi
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371312
- Range
- 0–5,000 psi
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-371411
- Range
- 0–6,000 psi
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-372111
- Range
- 0–7,000 kPa
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
Show all 38 sizesShow fewer sizes
- Indus part no.IH-OTC-372112
- Range
- 0–7,000 kPa
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-372201
- Range
- 0–6,000 psi
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" Fig. 1502 union, male
- Indus part no.IH-OTC-372211
- Range
- 0–21,000 kPa
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-372212
- Range
- 0–21,000 kPa
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-372261
- Range
- 0–5,000 psi
- Dial face
- Standard
- Service
- Standard
- End connection
- 2-1/16" 5,000 psi API flange (R-24)
- Indus part no.IH-OTC-372311
- Range
- 0–35,000 kPa
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-372323
- Range
- 0–35,000 kPa
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" Fig. 1502 union, male
- Indus part no.IH-OTC-372381
- Range
- 0–6,000 psi
- Dial face
- Standard
- Service
- Standard
- End connection
- 2-1/16" 5,000 psi API flange (R-24)
- Indus part no.IH-OTC-372391
- Range
- 0–6,000 psi
- Dial face
- Standard
- Service
- Standard
- End connection
- 2-1/16" 10,000 psi API flange (BX-152)
- Indus part no.IH-OTC-372411
- Range
- 0–42,000 kPa
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-372501
- Range
- 0–5,000 psi
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" Fig. 1502 union, male
- Indus part no.IH-OTC-373111
- Range
- 0–70 bar
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373112
- Range
- 0–70 bar
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373201
- Range
- 0–210 bar
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" Fig. 1502 union, male
- Indus part no.IH-OTC-373211
- Range
- 0–210 bar
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373212
- Range
- 0–210 bar
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373311
- Range
- 0–350 bar
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373411
- Range
- 0–420 bar
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373412
- Range
- 0–420 bar
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-373413
- Range
- 0–420 bar
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" Fig. 1502 union, male
- Indus part no.IH-OTC-374111
- Range
- 0–70 kg/cm²
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374112
- Range
- 0–70 kg/cm²
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374211
- Range
- 0–210 kg/cm²
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374212
- Range
- 0–210 kg/cm²
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374311
- Range
- 0–350 kg/cm²
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374312
- Range
- 0–350 kg/cm²
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374401
- Range
- 0–420 kg/cm²
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" Fig. 1502 union, male
- Indus part no.IH-OTC-374411
- Range
- 0–420 kg/cm²
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374412
- Range
- 0–420 kg/cm²
- Dial face
- Luminous
- Service
- Standard
- End connection
- 2" line pipe thread female
- Indus part no.IH-OTC-374441
- Range
- 0–42,000 kPa
- Dial face
- Standard
- Service
- Standard
- End connection
- 2" Fig. 1502 union, male
Range — Dial range and unit, as printed on the dial face. Dial face — Dial face style — standard, luminous, or dual units — as published. Service — Service trim — standard, sour gas (H2S), salt water — as published. End connection — End connection, as published. Ask us for the dimension drawing if you need it stamped.
What is the Oteco Model 7 standard service pressure gauge?▾
How do I read Oteco Model 7 part numbers such as IH-OTC-371111 and 372201?▾
Is the Oteco Model 7 gauge interchangeable with a Cameron Type D or Totco Type 4?▾
Which ranges does the Oteco Model 7 standard gauge offer in psi, bar and kPa?▾
Which end connections are available on the Oteco Model 7 standard gauge?▾
What is the pressure and temperature limit of the Oteco Model 7 standard gauge?▾
How does the standard Oteco Model 7 differ from the sour gas and salt water Model 7?▾
Can the Oteco Model 7 standard gauge be supplied with ABS or DNV unit certification?▾
Which hammer union does the Oteco Model 7 standard gauge mate with?▾
Can an Oteco Model 7 gauge be rebuilt, and what protects the movement?▾
Where is the Oteco Model 7 standard gauge made?▾
Do you stock the Oteco Model 7 standard gauge?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog





