Dixon One-Piece Flange Adapters

Dixon One-Piece Flange Adapters in iron, iron, steel, 4": 7 part numbers.
Product description
Dixon One-Piece Flange Adapters in iron, iron, steel, 4": 7 part numbers.
Specification
- Type: Adapter
- Material: Iron, Iron, Steel
- Size range: 4"
- Part numbers: 7
Sizes and part numbers
The Sizes & Part Numbers tab lists every Dixon part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Thread identification
Adapters only seal when both ends match the port they go into. JIC 37° and SAE 45° flares, NPT and BSPT tapers, and ORB, BSPP and metric parallel threads can look alike; quote the part number, or measure the thread and tell us the seat, and we will confirm the end types before supply.
How to order
Quote the Dixon part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
7 sizes- Dixon Valve & Coupling part no.HUF206400FLG-ST
- Description
- One-Piece Flange x Female Hammer Union Adapter, 4 Inch Adapter
- Flange size
- —
- Dixon Valve & Coupling part no.HUF206400FLG
- Description
- One-Piece Flange x Female Hammer Union Adapter, 4 Inch Adapter
- Flange size
- —
- Dixon Valve & Coupling part no.HUF206400FLG-45
- Description
- One-Piece Flange x Female Hammer Union 45 Deg. Elbow Adapter
- Flange size
- 4"
- Dixon Valve & Coupling part no.HUM206400FLG
- Description
- One-Piece Flange x Male Hammer Union Adapter, 4 Inch Adapter
- Flange size
- 4"
- Dixon Valve & Coupling part no.HUM206400FLG-ST
- Description
- One-Piece Flange x Male Hammer Union Adapter, 4 Inch Adapter
- Flange size
- 4"
- Dixon Valve & Coupling part no.HUM206400FLG-45
- Description
- One-Piece Flange x Male Hammer Union 45 Deg. Elbow Adapter
- Flange size
- 4"
- Dixon Valve & Coupling part no.HUFALL600FLG
- Description
- 6in FIG 100/206 FEM HAMMER UNION x 125#
- Flange size
- —
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What is the Dixon One-Piece Flange Adapters and what is it used for?▾
What are the part numbers of the Dixon One-Piece Flange Adapters?▾
Which hose goes with the Dixon One-Piece Flange Adapters?▾
What sizes does the Dixon One-Piece Flange Adapters come in?▾
What connection does the Dixon One-Piece Flange Adapters have?▾
What pressure is the Dixon One-Piece Flange Adapters rated for?▾
What is the Dixon One-Piece Flange Adapters made from?▾
Which standard does the Dixon One-Piece Flange Adapters follow?▾
What does the Dixon One-Piece Flange Adapters connect to?▾
Can Indus make up a hose assembly with the Dixon One-Piece Flange Adapters?▾
How does the Dixon One-Piece Flange Adapters differ from the Dixon Straight Flange x Male JIC Hydraulic Adapters?▾
Do you stock the Dixon One-Piece Flange Adapters in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- SAE-Flansch Flansch
- fr
- bride SAE bride
- es
- brida SAE brida
- it
- flangia SAE flangia
From the blog
Written about this range
Buying fittings & adapters
SAE flange adapters: Code 61 and Code 62 flange heads, pad adapters and how to choose them
Above 1" and on pump ports, threads give way to four bolts and an O-ring. An SAE flange adapter turns that four-bolt port into a JIC, ORFS, NPTF, ORB or weld connection — in Code 61 to 5,000 psi in small sizes, or Code 62 to 6,000 psi through 2". Flange heads versus flange pad adapters, Code 61 against Code 62, pressure by size, and what an order has to state.
5 min read
Failure analysis
A damaged port: repair it, or is the component scrap?
The fitting is cheap and the thing it screws into is not. How to judge what is in front of you, and the cases where the honest answer is that it is finished.
3 min read
Thread & fitting identification
Hydraulic fittings and adapters: the complete guide to thread families, seats and seals
BSP, JIC, ORFS, NPT, NPSM, SAE flare, O-ring boss, metric 24° cone, Japanese 30° and SAE flanges: how each family seals, how to tell them apart, and which standard each one is made to.
6 min read







