Line Contact Steel Wire Rope — Galvanized and Ungalvanized, 8–120 mm

Line Contact Steel Wire Rope, in 47 sizes, 8 mm to 120 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Line Contact Steel Wire Rope
- Size range: 8 mm to 120 mm
- Size range
- 8 mm to 120 mm
- Material
- Steel wire
- Finish
- Bright or galvanized
Product description
Steel wire rope for cranes, winches, slings and guying. Steel wire, bright or galvanized.
Sizes and ratings
47 sizes, 8 mm to 120 mm. Minimum breaking load 37.4 to 8,410 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on construction, core and grade: more wires per strand bend more easily over a sheave, a steel core resists crushing, and a higher grade carries more for the same diameter. Work from the minimum breaking load and your design factor.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Line Contact Steel Wire Rope |
| Sizes | 47 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 8 mm to 120 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 37.4 to 8,410 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Steel wire |
| Finish | Bright or galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
47 sizes- Indus part no.IH-LR-WR-LC-8MM
- Size
- 8 mm
- MBL 1770 FC (kN)
- 37.4
- MBL 1770 IWRC (kN)
- 40.3
- MBL 1960 FC (kN)
- 41.4
- MBL 1960 IWRC (kN)
- 44.7
- Weight, natural fibre core (kg/100 m)
- 24.3
- Weight, steel core (kg/100 m)
- 26.8
- Indus part no.IH-LR-WR-LC-9MM
- Size
- 9 mm
- MBL 1770 FC (kN)
- 47.3
- MBL 1770 IWRC (kN)
- 51
- MBL 1960 FC (kN)
- 52.4
- MBL 1960 IWRC (kN)
- 56.5
- Weight, natural fibre core (kg/100 m)
- 30.8
- Weight, steel core (kg/100 m)
- 33.9
- Indus part no.IH-LR-WR-LC-10MM
- Size
- 10 mm
- MBL 1770 FC (kN)
- 58.4
- MBL 1770 IWRC (kN)
- 63
- MBL 1960 FC (kN)
- 64.7
- MBL 1960 IWRC (kN)
- 69.8
- Weight, natural fibre core (kg/100 m)
- 38
- Weight, steel core (kg/100 m)
- 41.8
- Indus part no.IH-LR-WR-LC-11MM
- Size
- 11 mm
- MBL 1770 FC (kN)
- 70.7
- MBL 1770 IWRC (kN)
- 76.2
- MBL 1960 FC (kN)
- 78.3
- MBL 1960 IWRC (kN)
- 84.4
- Weight, natural fibre core (kg/100 m)
- 46
- Weight, steel core (kg/100 m)
- 50.6
- Indus part no.IH-LR-WR-LC-12MM
- Size
- 12 mm
- MBL 1770 FC (kN)
- 84.1
- MBL 1770 IWRC (kN)
- 90.7
- MBL 1960 FC (kN)
- 93.1
- MBL 1960 IWRC (kN)
- 100
- Weight, natural fibre core (kg/100 m)
- 54.7
- Weight, steel core (kg/100 m)
- 60.2
- Indus part no.IH-LR-WR-LC-14MM
- Size
- 14 mm
- MBL 1770 FC (kN)
- 114
- MBL 1770 IWRC (kN)
- 124
- MBL 1960 FC (kN)
- 127
- MBL 1960 IWRC (kN)
- 137
- Weight, natural fibre core (kg/100 m)
- 74.5
- Weight, steel core (kg/100 m)
- 81.9
- Indus part no.IH-LR-WR-LC-16MM
- Size
- 16 mm
- MBL 1770 FC (kN)
- 150
- MBL 1770 IWRC (kN)
- 161
- MBL 1960 FC (kN)
- 166
- MBL 1960 IWRC (kN)
- 179
- Weight, natural fibre core (kg/100 m)
- 97.3
- Weight, steel core (kg/100 m)
- 107
- Indus part no.IH-LR-WR-LC-18MM
- Size
- 18 mm
- MBL 1770 FC (kN)
- 189
- MBL 1770 IWRC (kN)
- 204
- MBL 1960 FC (kN)
- 210
- MBL 1960 IWRC (kN)
- 226
- Weight, natural fibre core (kg/100 m)
- 123
- Weight, steel core (kg/100 m)
- 135
Show all 47 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. MBL 1770 FC — Minimum breaking load, 1770 N/mm² rope grade, fibre core. MBL 1770 IWRC — Minimum breaking load, 1770 N/mm² rope grade, steel core. MBL 1960 FC — Minimum breaking load, 1960 N/mm² rope grade, fibre core. MBL 1960 IWRC — Minimum breaking load, 1960 N/mm² rope grade, steel core. Weight, natural fibre core — Weight per 100 m with a natural fibre core. Weight, steel core — Weight per 100 m with a steel (IWRC) core. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the Line Contact Steel Wire Rope — Galvanized and Ungalvanized and where is it used?▾
How do I read Line Contact Steel Wire Rope — Galvanized and Ungalvanized part numbers such as IH-LR-WR-LC-8MM?▾
What size range does the Line Contact Steel Wire Rope — Galvanized and Ungalvanized cover?▾
How should I pick the size of Line Contact Steel Wire Rope — Galvanized and Ungalvanized for my job?▾
What load rating does the Line Contact Steel Wire Rope — Galvanized and Ungalvanized carry?▾
What is the Line Contact Steel Wire Rope — Galvanized and Ungalvanized made from and how is it finished?▾
Does the Line Contact Steel Wire Rope — Galvanized and Ungalvanized come with a test certificate?▾
Which parts connect to the Line Contact Steel Wire Rope — Galvanized and Ungalvanized?▾
How should the Line Contact Steel Wire Rope — Galvanized and Ungalvanized be fitted and inspected?▾
How does the Line Contact Steel Wire Rope — Galvanized and Ungalvanized compare with the 6x19S and 6x19W Line Contact Steel Wire Rope?▾
Can you export the Line Contact Steel Wire Rope — Galvanized and Ungalvanized from Dubai?▾
Do you hold the Line Contact Steel Wire Rope — Galvanized and Ungalvanized for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Wire rope construction explained: 6x19 vs 6x36 vs 6x37, and IWRC vs fibre core
A wire rope designation such as 6x36WS-IWRC 1770 B sZ tells you almost everything about how the rope will behave. The surprise is how little the construction changes its strength: at 12 mm, the common six-strand ropes break within about 12% of each other. What changes is flexibility, abrasion resistance and crush resistance.
8 min read
Rigging capacity charts
Wire rope breaking strength chart: minimum breaking load by diameter, construction and grade
Minimum breaking loads for steel wire rope from 5 mm to 60 mm in 6x19 line-contact, 6x36WS and compacted constructions, by tensile grade and core, in kN and tonnes — with a construction-by-construction comparison, weights, and how a breaking load becomes a working load.
8 min read
Rigging capacity charts
Wire rope sling capacity chart: WLL by diameter, hitch and number of legs
Working load limits for single, two-leg and four-leg wire rope slings from 6 mm to 70 mm, Flemish-eye slings by hitch to 105 mm, and soft-eye slings at 5:1 and 6:1 to 110 mm — with the mode factors, the reasons two 12 mm slings can carry different ratings, and the limits on heat and bending.
9 min read







