Komatsu JIS Metric 30° Female Swivel Crimp Fitting for Braided Hose

The Komatsu JIS Metric 30° Female Swivel Crimp Fitting for Braided Hose is a one-piece crimp hose fitting for braided hydraulic hose — EN 853 1SN and 2SN, and SAE 100R1AT, 100R2AT, 100R16 and 100R17. It is supplied under the Indus Hydraulics brand and is dimensionally interchangeable with the Parker 1MU43 and 1XU43 series.

Construction

• Configuration: straight
• Thread form: JIS metric straight thread
• Sealing form: 30° cone seat
• Gender: female-swivel
• Material: carbon steel, zinc-plated and Cr3+ passivated (316 stainless on request)

Hose compatibility

Crimps onto EN 853 1SN and 2SN, and SAE 100R1AT, 100R2AT, 100R16 and 100R17. Pair it with the matching Indus crimp ferrule for the hose grade — the ferrule, not the fitting, is what changes between hose constructions. The assembly's pressure rating is set by the hose grade and bore, not by this fitting.

Parker equivalence

This listing replaces the Parker 1MU43 and 1XU43 series. Individual sizes are listed below with our part number alongside the Parker number they replace, so you can order from an existing bill of materials without re-specifying.

Sizes

7 sizes, hose bore -04 to -16. Full size and dimension table on this page.

How to order

Quote the Indus part number for the size you need, or send us the Parker number and we will cross it. Tell us the hose grade and bore and we will include the matching ferrule. Indus crimps and pressure-tests assemblies before dispatch — send the overall length and both end fittings on the RFQ.