Guide Roller — NS 2585

Guide Roller, in 7 sizes. Indus part numbers.
Key features
- Product type: Guide Roller
- Pattern / standard: NS 2585
- Size range: DN 150 to DN 450
Product description
Mooring guide roller to NS 2585.
Sizes
7 sizes, from DN 150 to DN 450. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Proof and breaking loads are as published for each size. They are test values, not working loads.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the standard, nominal size and SWL, and whether the fitting is welded or bolted to the deck.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Guide Roller |
| Pattern / standard | NS 2585 |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | DN 150 to DN 450 |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-MR-DF-GRN-DN150
- Size
- DN 150
- Min breaking load (t)
- 16
- D1 (mm)
- 240
- H (mm)
- 154
- d (mm)
- 90
- D2 (mm)
- 150
- Weight (kg)
- 25
- Indus part no.IH-MR-DF-GRN-DN200
- Size
- DN 200
- Min breaking load (t)
- 20
- D1 (mm)
- 310
- H (mm)
- 186
- d (mm)
- 115
- D2 (mm)
- 200
- Weight (kg)
- 50
- Indus part no.IH-MR-DF-GRN-DN250
- Size
- DN 250
- Min breaking load (t)
- 29
- D1 (mm)
- 380
- H (mm)
- 230
- d (mm)
- 135
- D2 (mm)
- 250
- Weight (kg)
- 90
- Indus part no.IH-MR-DF-GRN-DN300
- Size
- DN 300
- Min breaking load (t)
- 34
- D1 (mm)
- 440
- H (mm)
- 255
- d (mm)
- 155
- D2 (mm)
- 300
- Weight (kg)
- 130
- Indus part no.IH-MR-DF-GRN-DN350
- Size
- DN 350
- Min breaking load (t)
- 45
- D1 (mm)
- 500
- H (mm)
- 271
- d (mm)
- 175
- D2 (mm)
- 350
- Weight (kg)
- 170
- Indus part no.IH-MR-DF-GRN-DN400
- Size
- DN 400
- Min breaking load (t)
- 58
- D1 (mm)
- 560
- H (mm)
- 307
- d (mm)
- 195
- D2 (mm)
- 400
- Weight (kg)
- 250
- Indus part no.IH-MR-DF-GRN-DN450
- Size
- DN 450
- Min breaking load (t)
- 64
- D1 (mm)
- 630
- H (mm)
- 316
- d (mm)
- 210
- D2 (mm)
- 450
- Weight (kg)
- 310
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. D1 — Dimension D1 on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. d — Dimension d on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the Guide Roller — NS 2585 and where is it used?▾
How do I read Guide Roller — NS 2585 part numbers such as IH-MR-DF-GRN-DN150?▾
What size range does the Guide Roller — NS 2585 cover?▾
How do I choose the right size of Guide Roller — NS 2585?▾
What is the rated capacity of the Guide Roller — NS 2585?▾
What is the Guide Roller — NS 2585 made from and how is it finished?▾
What standard and certificate apply to the Guide Roller — NS 2585?▾
Which parts connect to the Guide Roller — NS 2585?▾
How do I install and check the Guide Roller — NS 2585?▾
How does the Guide Roller — NS 2585 compare with the Guide Roller — ISO 13775?▾
Do you ship the Guide Roller — NS 2585 outside the UAE?▾
Do you hold the Guide Roller — NS 2585 for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read








