Disc-Type Quick Release Towing Hook

Disc-Type Quick Release Towing Hook, in 6 sizes. Indus part numbers.
Key features
- Product type: Disc-Type Quick Release Towing Hook
- Size range: 7 t SWL to 100 t SWL
- Working load limit: 7–100 t
Product description
Disc-type quick release towing hook.
Sizes
6 sizes, from 7 t SWL to 100 t SWL. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the standard, nominal size and SWL, and whether the fitting is welded or bolted to the deck.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Disc-Type Quick Release Towing Hook |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 7 t SWL to 100 t SWL |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 7–100 t |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-MR-DF-QRD-7T
- Size
- 7 t SWL
- WLL (t)
- 7
- Proof load (t)
- 14
- A (mm)
- 712
- B (mm)
- 512
- C (mm)
- 235
- D (mm)
- 100
- E (mm)
- 185
- F (mm)
- 125
- G (mm)
- 65
- H (mm)
- 280
- I (mm)
- 112
- J (mm)
- 45
- K (mm)
- 120
- Indus part no.IH-MR-DF-QRD-15T
- Size
- 15 t SWL
- WLL (t)
- 15
- Proof load (t)
- 30
- A (mm)
- 905
- B (mm)
- 670
- C (mm)
- 325
- D (mm)
- 140
- E (mm)
- 255
- F (mm)
- 250
- G (mm)
- 100
- H (mm)
- 340
- I (mm)
- 144
- J (mm)
- 60
- K (mm)
- 130
- Indus part no.IH-MR-DF-QRD-25T
- Size
- 25 t SWL
- WLL (t)
- 25
- Proof load (t)
- 50
- A (mm)
- 1,238
- B (mm)
- 923
- C (mm)
- 445
- D (mm)
- 180
- E (mm)
- 355
- F (mm)
- 200
- G (mm)
- 130
- H (mm)
- 470
- I (mm)
- 186
- J (mm)
- 80
- K (mm)
- 162
- Indus part no.IH-MR-DF-QRD-45T
- Size
- 45 t SWL
- WLL (t)
- 45
- Proof load (t)
- 90
- A (mm)
- 1,323
- B (mm)
- 973
- C (mm)
- 455
- D (mm)
- 200
- E (mm)
- 355
- F (mm)
- 200
- G (mm)
- 130
- H (mm)
- 470
- I (mm)
- 218
- J (mm)
- 100
- K (mm)
- 230
- Indus part no.IH-MR-DF-QRD-65T
- Size
- 65 t SWL
- WLL (t)
- 65
- Proof load (t)
- 130
- A (mm)
- 1,598
- B (mm)
- 1,173
- C (mm)
- 464
- D (mm)
- 220
- E (mm)
- 454
- F (mm)
- 250
- G (mm)
- 162
- H (mm)
- 600
- I (mm)
- 256
- J (mm)
- 110
- K (mm)
- 250
- Indus part no.IH-MR-DF-QRD-100T
- Size
- 100 t SWL
- WLL (t)
- 100
- Proof load (t)
- 150
- A (mm)
- 1,750
- B (mm)
- 1,068
- C (mm)
- 632
- D (mm)
- 280
- E (mm)
- 492
- F (mm)
- 290
- G (mm)
- 176
- H (mm)
- 650
- I (mm)
- 288
- J (mm)
- 135
- K (mm)
- 270
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. I — Dimension I on the manufacturer dimension drawing. J — Dimension J on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Disc-Type Quick Release Towing Hook used for?▾
How do I read Disc-Type Quick Release Towing Hook part numbers such as IH-MR-DF-QRD-7T?▾
What size range does the Disc-Type Quick Release Towing Hook cover?▾
How do I choose the right size of Disc-Type Quick Release Towing Hook?▾
What load rating does the Disc-Type Quick Release Towing Hook carry?▾
What is the Disc-Type Quick Release Towing Hook made from and how is it finished?▾
What standard and certificate apply to the Disc-Type Quick Release Towing Hook?▾
Which parts connect to the Disc-Type Quick Release Towing Hook?▾
How should the Disc-Type Quick Release Towing Hook be fitted and inspected?▾
How does the Disc-Type Quick Release Towing Hook compare with the Quick Release Towing Hook — Tug Type?▾
Do you ship the Disc-Type Quick Release Towing Hook outside the UAE?▾
Do you hold the Disc-Type Quick Release Towing Hook for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read








