OCIMF Bulwark Chock / Fairlead — SWL 250 t

OCIMF Bulwark Chock / Fairlead. Indus part number.
Key features
- Product type: OCIMF Bulwark Chock / Fairlead
- Pattern / standard: OCIMF
- Size range: SWL 250 t — 600 × 450 mm opening
- Working load limit: 250 t
Product description
OCIMF bulwark chock and fairlead, SWL 250 t.
Configuration
Supplied as one configuration: SWL 250 t — 600 × 450 mm opening. Its Indus part number is in the table below.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the standard, nominal size and SWL, and whether the fitting is welded or bolted to the deck.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | OCIMF Bulwark Chock / Fairlead |
| Pattern / standard | OCIMF |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | SWL 250 t — 600 × 450 mm opening |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 250 t |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-MR-DF-OCF-250T
- Size
- SWL 250 t — 600 × 450 mm opening
- WLL (t)
- 250
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the OCIMF Bulwark Chock / Fairlead — SWL 250 t and where is it used?▾
How do I read OCIMF Bulwark Chock / Fairlead — SWL 250 t part numbers such as IH-MR-DF-OCF-250T?▾
Which sizes does the OCIMF Bulwark Chock / Fairlead — SWL 250 t come in?▾
How should I pick the size of OCIMF Bulwark Chock / Fairlead — SWL 250 t for my job?▾
What load rating does the OCIMF Bulwark Chock / Fairlead — SWL 250 t carry?▾
What is the OCIMF Bulwark Chock / Fairlead — SWL 250 t made from and how is it finished?▾
Does the OCIMF Bulwark Chock / Fairlead — SWL 250 t come with a test certificate?▾
What do I use with the OCIMF Bulwark Chock / Fairlead — SWL 250 t?▾
How do I install and check the OCIMF Bulwark Chock / Fairlead — SWL 250 t?▾
How does the OCIMF Bulwark Chock / Fairlead — SWL 250 t compare with the Bulwark Mooring Chock — ISO 13729?▾
Can you export the OCIMF Bulwark Chock / Fairlead — SWL 250 t from Dubai?▾
Is the OCIMF Bulwark Chock / Fairlead — SWL 250 t available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read








