Guide Roller — ISO 13775

Guide Roller, in 8 sizes. Indus part numbers.
Key features
- Product type: Guide Roller
- Pattern / standard: ISO 13775
- Size range: DN 150 to DN 500
- Working load limit: 19–198 t
Product description
Mooring guide roller to ISO 13775.
Sizes
8 sizes, from DN 150 to DN 500. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the standard, nominal size and SWL, and whether the fitting is welded or bolted to the deck.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Guide Roller |
| Pattern / standard | ISO 13775 |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | DN 150 to DN 500 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 19–198 t |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-MR-DF-GRI-DN150
- Size
- DN 150
- WLL, at 0° (t)
- 19
- WLL, at 90° (t)
- 27
- D1 (mm)
- 150
- H1 (mm)
- 137
- D2 (mm)
- 216
- D3 (mm)
- 105
- D4 (mm)
- 71
- H2 (mm)
- 212
- Weight (kg)
- 29
- Indus part no.IH-MR-DF-GRI-DN200
- Size
- DN 200
- WLL, at 0° (t)
- 32
- WLL, at 90° (t)
- 45
- D1 (mm)
- 200
- H1 (mm)
- 157
- D2 (mm)
- 280
- D3 (mm)
- 135
- D4 (mm)
- 93
- H2 (mm)
- 227
- Weight (kg)
- 53
- Indus part no.IH-MR-DF-GRI-DN250
- Size
- DN 250
- WLL, at 0° (t)
- 42
- WLL, at 90° (t)
- 59
- D1 (mm)
- 250
- H1 (mm)
- 177
- D2 (mm)
- 340
- D3 (mm)
- 155
- D4 (mm)
- 113
- H2 (mm)
- 245
- Weight (kg)
- 96
- Indus part no.IH-MR-DF-GRI-DN300
- Size
- DN 300
- WLL, at 0° (t)
- 52
- WLL, at 90° (t)
- 74
- D1 (mm)
- 300
- H1 (mm)
- 197
- D2 (mm)
- 400
- D3 (mm)
- 175
- D4 (mm)
- 128
- H2 (mm)
- 289
- Weight (kg)
- 136
- Indus part no.IH-MR-DF-GRI-DN350
- Size
- DN 350
- WLL, at 0° (t)
- 75
- WLL, at 90° (t)
- 106
- D1 (mm)
- 350
- H1 (mm)
- 217
- D2 (mm)
- 460
- D3 (mm)
- 190
- D4 (mm)
- 145
- H2 (mm)
- 309
- Weight (kg)
- 192
- Indus part no.IH-MR-DF-GRI-DN400
- Size
- DN 400
- WLL, at 0° (t)
- 90
- WLL, at 90° (t)
- 127
- D1 (mm)
- 400
- H1 (mm)
- 237
- D2 (mm)
- 520
- D3 (mm)
- 200
- D4 (mm)
- 154
- H2 (mm)
- 344
- Weight (kg)
- 262
- Indus part no.IH-MR-DF-GRI-DN450
- Size
- DN 450
- WLL, at 0° (t)
- 115
- WLL, at 90° (t)
- 163
- D1 (mm)
- 450
- H1 (mm)
- 257
- D2 (mm)
- 590
- D3 (mm)
- 220
- D4 (mm)
- 167
- H2 (mm)
- 364
- Weight (kg)
- 347
- Indus part no.IH-MR-DF-GRI-DN500
- Size
- DN 500
- WLL, at 0° (t)
- 140
- WLL, at 90° (t)
- 198
- D1 (mm)
- 500
- H1 (mm)
- 277
- D2 (mm)
- 660
- D3 (mm)
- 235
- D4 (mm)
- 178
- H2 (mm)
- 384
- Weight (kg)
- 454
Size — Nominal size as the manufacturer states it. WLL, at 0° — Working load limit — the most the part may carry in service, as the manufacturer rates it. WLL, at 90° — Working load limit — the most the part may carry in service, as the manufacturer rates it. D1 — Dimension D1 on the manufacturer dimension drawing. H1 — Dimension H1 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. D3 — Dimension D3 on the manufacturer dimension drawing. D4 — Dimension D4 on the manufacturer dimension drawing. H2 — Dimension H2 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Guide Roller — ISO 13775 and where is it used?▾
How do I read Guide Roller — ISO 13775 part numbers such as IH-MR-DF-GRI-DN150?▾
Which sizes does the Guide Roller — ISO 13775 come in?▾
How should I pick the size of Guide Roller — ISO 13775 for my job?▾
What is the rated capacity of the Guide Roller — ISO 13775?▾
What is the Guide Roller — ISO 13775 made from and how is it finished?▾
What standard and certificate apply to the Guide Roller — ISO 13775?▾
What do I use with the Guide Roller — ISO 13775?▾
How should the Guide Roller — ISO 13775 be fitted and inspected?▾
How does the Guide Roller — ISO 13775 compare with the Guide Roller — JIS F 2014?▾
Can you export the Guide Roller — ISO 13775 from Dubai?▾
Do you hold the Guide Roller — ISO 13775 for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read








