Pedestal Roller Fairlead — ISO 13776

Pedestal Roller Fairlead, in 8 sizes. Indus part numbers.
Key features
- Product type: Pedestal Roller Fairlead
- Pattern / standard: ISO 13776
- Size range: DN 150 to DN 500
- Working load limit: 19–198 t
Product description
Pedestal roller fairlead to ISO 13776.
Sizes
8 sizes, from DN 150 to DN 500. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the standard, nominal size and SWL, and whether the fitting is welded or bolted to the deck.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Pedestal Roller Fairlead |
| Pattern / standard | ISO 13776 |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | DN 150 to DN 500 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 19–198 t |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-MR-DF-PDR-DN150
- Size
- DN 150
- WLL, at 0° (t)
- 19
- WLL, at 90° (t)
- 27
- D1 (mm)
- 220
- h (mm)
- 200
- h1 (mm)
- 100
- d (mm)
- 71.5
- D2 (mm)
- 230
- t1 (mm)
- 16
- t2 (mm)
- 10
- t3 (mm)
- 16
- Weight (kg)
- 115
- Indus part no.IH-MR-DF-PDR-DN200
- Size
- DN 200
- WLL, at 0° (t)
- 32
- WLL, at 90° (t)
- 45
- D1 (mm)
- 288
- h (mm)
- 200
- h1 (mm)
- 100
- d (mm)
- 93.5
- D2 (mm)
- 300
- t1 (mm)
- 20
- t2 (mm)
- 12
- t3 (mm)
- 20
- Weight (kg)
- 169
- Indus part no.IH-MR-DF-PDR-DN250
- Size
- DN 250
- WLL, at 0° (t)
- 42
- WLL, at 90° (t)
- 59
- D1 (mm)
- 357
- h (mm)
- 200
- h1 (mm)
- 100
- d (mm)
- 113.5
- D2 (mm)
- 370
- t1 (mm)
- 22
- t2 (mm)
- 12.5
- t3 (mm)
- 22
- Weight (kg)
- 210
- Indus part no.IH-MR-DF-PDR-DN300
- Size
- DN 300
- WLL, at 0° (t)
- 52
- WLL, at 90° (t)
- 74
- D1 (mm)
- 417
- h (mm)
- 225
- h1 (mm)
- 125
- d (mm)
- 128.5
- D2 (mm)
- 430
- t1 (mm)
- 24
- t2 (mm)
- 13
- t3 (mm)
- 24
- Weight (kg)
- 256
- Indus part no.IH-MR-DF-PDR-DN350
- Size
- DN 350
- WLL, at 0° (t)
- 75
- WLL, at 90° (t)
- 106
- D1 (mm)
- 472
- h (mm)
- 225
- h1 (mm)
- 125
- d (mm)
- 145.5
- D2 (mm)
- 490
- t1 (mm)
- 26
- t2 (mm)
- 17
- t3 (mm)
- 26
- Weight (kg)
- 358
- Indus part no.IH-MR-DF-PDR-DN400
- Size
- DN 400
- WLL, at 0° (t)
- 90
- WLL, at 90° (t)
- 127
- D1 (mm)
- 540
- h (mm)
- 250
- h1 (mm)
- 150
- d (mm)
- 154.5
- D2 (mm)
- 560
- t1 (mm)
- 28
- t2 (mm)
- 18
- t3 (mm)
- 28
- Weight (kg)
- 436
- Indus part no.IH-MR-DF-PDR-DN450
- Size
- DN 450
- WLL, at 0° (t)
- 115
- WLL, at 90° (t)
- 163
- D1 (mm)
- 600
- h (mm)
- 250
- h1 (mm)
- 150
- d (mm)
- 167.5
- D2 (mm)
- 620
- t1 (mm)
- 30
- t2 (mm)
- 20
- t3 (mm)
- 30
- Weight (kg)
- 530
- Indus part no.IH-MR-DF-PDR-DN500
- Size
- DN 500
- WLL, at 0° (t)
- 140
- WLL, at 90° (t)
- 198
- D1 (mm)
- 655
- h (mm)
- 250
- h1 (mm)
- 150
- d (mm)
- 178.5
- D2 (mm)
- 680
- t1 (mm)
- 32
- t2 (mm)
- 22
- t3 (mm)
- 34
- Weight (kg)
- 636
Size — Nominal size as the manufacturer states it. WLL, at 0° — Working load limit — the most the part may carry in service, as the manufacturer rates it. WLL, at 90° — Working load limit — the most the part may carry in service, as the manufacturer rates it. D1 — Dimension D1 on the manufacturer dimension drawing. h — Dimension h on the manufacturer dimension drawing. h1 — Dimension h1 on the manufacturer dimension drawing. d — Dimension d on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. t1 — Dimension t1 on the manufacturer dimension drawing. t2 — Dimension t2 on the manufacturer dimension drawing. t3 — Dimension t3 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Pedestal Roller Fairlead — ISO 13776 and where is it used?▾
How do I read Pedestal Roller Fairlead — ISO 13776 part numbers such as IH-MR-DF-PDR-DN150?▾
Which sizes does the Pedestal Roller Fairlead — ISO 13776 come in?▾
How should I pick the size of Pedestal Roller Fairlead — ISO 13776 for my job?▾
What load rating does the Pedestal Roller Fairlead — ISO 13776 carry?▾
What material and finish does the Pedestal Roller Fairlead — ISO 13776 have?▾
What standard and certificate apply to the Pedestal Roller Fairlead — ISO 13776?▾
Which parts connect to the Pedestal Roller Fairlead — ISO 13776?▾
How do I install and check the Pedestal Roller Fairlead — ISO 13776?▾
How does the Pedestal Roller Fairlead — ISO 13776 compare with the Roller Fairlead — DIN 81902?▾
Do you ship the Pedestal Roller Fairlead — ISO 13776 outside the UAE?▾
Do you hold the Pedestal Roller Fairlead — ISO 13776 for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read








