Grade 80 Single-Leg Chain Sling, Master Link and Grab Hook — Type SOG

Grade 80 single-leg chain sling made up with an oblong master link at the top and a grab hook at the bottom. The chain and every fitting are Grade 80 alloy steel, quenched and tempered, and matched in size so that no component is the weak point.

What SOG means

Chain sling make-ups are named by a letter code read from the top down: S = single leg; O = oblong master link; G = grab hook. So an SOG sling is a single leg sling with an oblong master link at the top and a grab hook at the bottom.

Sizes and ratings

21 chain sizes, 4 mm to 50 mm. Working load limit 0.5 to 78.5 t in a straight vertical lift, at a 4:1 design factor. Used in a choke hitch the rating falls to 80% of the figure in the table. Each size has its own Indus part number below.

Choosing this make-up

The oblong master link sits on the crane hook and lets the sling hang and turn freely. A grab hook has a narrow throat that seats across a single chain link, so a leg can be hooked back onto its own chain to shorten it or to wrap the load.

Identification and certificate

Each sling carries a permanent tag with its serial number, chain size, grade, reach and working load limit, and ships with the manufacturer's test certificate. The rating on the tag and certificate is the one that governs the sling in service.

Ordering

Slings are made up to length. Quote the Indus part number for the chain size and the reach you need, measured from the bearing point of the master link to the bearing point of the hook, or send the load, the number of lifting points and the headroom and we will size the sling for you.