Grade 80 Bolt-On Lifting Point — 1–8 t WLL, EN 1677

Grade 80 Bolt-On Lifting Point (EN 1677), in 5 sizes, 1 t to 8 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Bolt-On Lifting Point
- Pattern / standard: EN 1677
- Size range: 1 t to 8 t
- Working load limit: 1 to 8 t
- Size range
- 1 t to 8 t
- Working load limit
- 1 to 8 t
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Lifting points, pad eyes and weld-on rings give a fixed or swivelling point to rig a load from. Made to EN 1677. Alloy steel, powder coated.
Sizes and ratings
5 sizes, 1 t to 8 t. Working load limit 1 to 8 t. Minimum breaking load 4 to 32 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged + quenched and tempered.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Rate the point for the load and the direction of pull. A swivel point follows the sling; a fixed eye loses capacity when pulled off its axis. Bolted points need the stated thread engagement and torque; weld-on points need a qualified weld to sound structure.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Bolt-On Lifting Point |
| Pattern / standard | EN 1677 |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1 t to 8 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1 to 8 t |
| Minimum breaking load | 4 to 32 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-LR-LP-BLP80-1T
- Size
- 1 t
- WLL (t)
- 1
- Min breaking load (t)
- 4
- A (mm)
- 78
- B (mm)
- 40
- D (mm)
- 12
- L (mm)
- 61
- M (mm)
- 12.5
- Weight (kg)
- 1.09
- Indus part no.IH-LR-LP-BLP80-2T
- Size
- 2 t
- WLL (t)
- 2
- Min breaking load (t)
- 8
- A (mm)
- 80.5
- B (mm)
- 40
- D (mm)
- 14
- L (mm)
- 155
- M (mm)
- 14.5
- Weight (kg)
- 1.24
- Indus part no.IH-LR-LP-BLP80-3T
- Size
- 3 t
- WLL (t)
- 3
- Min breaking load (t)
- 12
- A (mm)
- 94
- B (mm)
- 46.5
- D (mm)
- 16
- L (mm)
- 155
- M (mm)
- 16.5
- Weight (kg)
- 1.56
- Indus part no.IH-LR-LP-BLP80-5T
- Size
- 5 t
- WLL (t)
- 5
- Min breaking load (t)
- 20
- A (mm)
- 118
- B (mm)
- 60
- D (mm)
- 20
- L (mm)
- 180
- M (mm)
- 22.5
- Weight (kg)
- 2.585
- Indus part no.IH-LR-LP-BLP80-8T
- Size
- 8 t
- WLL (t)
- 8
- Min breaking load (t)
- 32
- A (mm)
- 141
- B (mm)
- 63
- D (mm)
- 26
- L (mm)
- 220
- M (mm)
- 26.5
- Weight (kg)
- 4.92
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Grade 80 Bolt-On Lifting Point and what is it used for?▾
How are the Indus part numbers for the Grade 80 Bolt-On Lifting Point structured?▾
What sizes does the Grade 80 Bolt-On Lifting Point come in?▾
How do I choose the right size of Grade 80 Bolt-On Lifting Point?▾
What is the working load limit of the Grade 80 Bolt-On Lifting Point?▾
What is the Grade 80 Bolt-On Lifting Point made from?▾
Does the Grade 80 Bolt-On Lifting Point come with a test certificate?▾
What should the Grade 80 Bolt-On Lifting Point be used with?▾
How should the Grade 80 Bolt-On Lifting Point be inspected and used safely?▾
Where is the Grade 80 Bolt-On Lifting Point typically used?▾
How does the Grade 80 Bolt-On Lifting Point differ from the Grade 80 Swivel Lifting Point?▾
Do you stock the Grade 80 Bolt-On Lifting Point in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Lifting points compared: weld-on pad eyes, bolt-on and swivel lifting points, and eye bolts
A weld-on lifting point is only as good as its weld. A bolt-on point is only as good as its thread engagement and torque. A swivel point turns to face the sling, but not every one keeps its full rating sideways. Here is how the four kinds of lifting point compare, and what each needs to be fitted properly.
6 min read
Lifting & rigging
Eye bolt types and angled loads: plain, shoulder and DIN 580 collar eye bolts
A plain eye bolt is rated for a straight pull only. A shoulder eye bolt pulled at 45° keeps 30% of its rating. A DIN 580 collar eye bolt has its own table for angled loads and none at all for a pull across the eye. Here is how each type is rated, fitted and derated.
8 min read








