Enerpac RWH Series Hydraulic Cylinders

Enerpac RWH Series Hydraulic Cylinders: 4 part numbers.
Product description
Enerpac RWH Series Hydraulic Cylinders: 4 part numbers.
Specification
- Type: Hydraulic Cylinder
- Material: Steel
- Pressure stated by the maker: 3,000 to 5,000 psi (207 to 345 bar), by size
- Single Acting/double Acting: Single Acting
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Enerpac part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing a cylinder
Choose capacity with margin over the working load, and stroke for the full travel needed. High-pressure tooling cylinders run at up to 700 bar (10,000 psi) and need a matching pump, hose and gauge rated for that pressure.
How to order
Quote the Enerpac part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Body Material | Steel |
| Cylinder Type | Hollow Plunger |
| Handle | No |
| Material | Steel |
| Plunger Type | Hollow |
| Single Acting/double Acting | Single Acting |
Shipping & lead time
Sizes & part numbers
4 sizes- Enerpac part no.RWH20
- Description
- Hydraulic Cylinder, 2 Ton, 5/16 Inch Stroke Length
- Stroke (in)
- 0.25
- Retracted (in)
- 2.06
- Extended (in)
- 2.37
- Rated pressure (psi)
- 3,000
- Action
- Single Acting
- Enerpac part no.RWH120
- Description
- Hollow Hydraulic Cylinder, Steel Body, 6 Ton, Capacity, 5000 psi
- Stroke (in)
- 0.25
- Retracted (in)
- 2.19
- Extended (in)
- 2.5
- Rated pressure (psi)
- 5,000
- Action
- Single Acting
- Enerpac part no.RWH121
- Description
- Hydraulic Cylinder, 6 Ton, 1 Inch Stroke Length
- Stroke (in)
- 1
- Retracted (in)
- 3.19
- Extended (in)
- 4.5
- Rated pressure (psi)
- 5,000
- Action
- Single Acting
- Enerpac part no.RWH301
- Description
- Hydraulic Cylinder, 18 Ton, 1 Inch Stroke Length
- Stroke (in)
- 1
- Retracted (in)
- 5.12
- Extended (in)
- 6.12
- Rated pressure (psi)
- 5,000
- Action
- Single Acting
Description — What this part number is, as the manufacturer lists it. Stroke — Cylinder stroke, as published. Retracted — Length with the rod retracted, as published. Extended — Length with the rod extended, as published. Rated pressure — Rated working pressure, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Action — Single- or double-acting, as published.
Pressure, flow, speed, torque and load figures are the manufacturer’s published ratings for that part number. A circuit is limited by its lowest-rated component, so check them against the hose, fittings and valves it connects to.
What are the Enerpac RWH series hydraulic cylinders used for?▾
Which models are listed for the Enerpac RWH series hydraulic cylinders?▾
How should I select the Enerpac RWH series hydraulic cylinders for my application?▾
What pressure rating do the Enerpac RWH series hydraulic cylinders have?▾
Which materials are the Enerpac RWH series hydraulic cylinders offered in?▾
Which standards and documents apply to the Enerpac RWH series hydraulic cylinders?▾
What do the Enerpac RWH series hydraulic cylinders connect to?▾
How should the Enerpac RWH series hydraulic cylinders be installed and maintained?▾
Where are the Enerpac RWH series hydraulic cylinders used?▾
How do the Enerpac RWH series hydraulic cylinders differ from the Enerpac RCH series hollow plunger cylinders?▾
What country of origin and HS code apply to the Enerpac RWH series hydraulic cylinders?▾
Can I buy the Enerpac RWH series hydraulic cylinders from stock in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Cylinders, pumps & motors
10,000 psi hydraulic cylinders and pumps: choosing, matching and using a 700 bar system safely
Jacking, pressing, pulling and bolting tools run at 10,000 psi, where a small cylinder lifts tens of tonnes and a mistake is measured in crushed hands. Single and double-acting, hollow plunger, low-height, lock-nut and aluminium cylinders; hand, air and electric pumps; matching oil volume; and the rules that keep a 700 bar lift safe.
10 min read
Instrumentation & gauges
10,000 psi hydraulic gauges: pressure, force and digital gauges for jacking, pressing and bolting
On a 700 bar jacking or bolting system the gauge is the only way to know the load, and the only warning before something gives. 10,000 psi analogue gauges, force gauges that read tonnes directly for a given cylinder, digital gauges, gauge adaptors and snubber valves — and how to fit and read them safely.
6 min read
Cylinders, pumps & motors
Why a hydraulic cylinder drifts: piston seal, valve or oil — and how to test which
A boom that sinks overnight is blamed on the cylinder far more often than the cylinder deserves. Why piston-seal bypass alone rarely drops a load, the valve leakage and thermal contraction that usually do, a safe step-by-step test, and how to read external leaks, scored rods and blown seals.
10 min read








