Enerpac BRP Series Pull Hydraulic Cylinder

Enerpac BRP Series Pull Hydraulic Cylinder: 4 part numbers.
Product description
Enerpac BRP Series Pull Hydraulic Cylinder: 4 part numbers.
Specification
- Type: Hydraulic Cylinder
- Material: Steel
- Single Acting/double Acting: Single Acting
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Enerpac part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing a cylinder
Choose capacity with margin over the working load, and stroke for the full travel needed. High-pressure tooling cylinders run at up to 700 bar (10,000 psi) and need a matching pump, hose and gauge rated for that pressure.
How to order
Quote the Enerpac part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Body Material | Steel |
| Cylinder Type | Pull |
| Finish | Paint |
| Handle | No |
| Included | Slotted Link |
| Material | Steel |
| Plunger To Mounting Hole | 1.38" |
| Plunger Type | Solid |
| Series | BRP Series |
| Single Acting/double Acting | Single Acting |
| Slot To Link End | 2.17" |
Shipping & lead time
Sizes & part numbers
4 sizes- Enerpac part no.BRP306
- Description
- Cylinder 30 Tons 6 Inch Stroke Length
- Stroke (in)
- 6
- Retracted (in)
- 43.71
- Extended (in)
- 49.71
- Action
- Single Acting
- Enerpac part no.BRP606
- Description
- Cylinder 60 Tons 6 Inch Stroke Length
- Stroke (in)
- 6
- Retracted (in)
- 28.28
- Extended (in)
- 34.28
- Action
- Single Acting
- Enerpac part no.BRP106C
- Description
- Cylinder 10 Tons 6 Inch Stroke Length
- Stroke (in)
- 5.875
- Retracted (in)
- 23.66
- Extended (in)
- 29.57
- Action
- Single Acting
- Enerpac part no.BRP106L
- Description
- Cylinder 10 Tons 6 Inch Stroke Length
- Stroke (in)
- 5.875
- Retracted (in)
- 22.56
- Extended (in)
- 28.46
- Action
- Single Acting
Description — What this part number is, as the manufacturer lists it. Stroke — Cylinder stroke, as published. Retracted — Length with the rod retracted, as published. Extended — Length with the rod extended, as published. Action — Single- or double-acting, as published.
Where and how is the Enerpac BRP series pull hydraulic cylinder used?▾
Which models is listed for the Enerpac BRP series pull hydraulic cylinder?▾
How do I choose the right size or model of the Enerpac BRP series pull hydraulic cylinder?▾
What pressure rating does the Enerpac BRP series pull hydraulic cylinder have?▾
What is the Enerpac BRP series pull hydraulic cylinder made from?▾
Which standards and documents apply to the Enerpac BRP series pull hydraulic cylinder?▾
What does the Enerpac BRP series pull hydraulic cylinder connect to?▾
How should the Enerpac BRP series pull hydraulic cylinder be installed and maintained?▾
Where is the Enerpac BRP series pull hydraulic cylinder used?▾
How does the Enerpac BRP series pull hydraulic cylinder differ from the Enerpac BRC series pull hydraulic cylinders?▾
What country of origin and HS code apply to the Enerpac BRP series pull hydraulic cylinder?▾
Can I buy the Enerpac BRP series pull hydraulic cylinder from stock in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Cylinders, pumps & motors
10,000 psi hydraulic cylinders and pumps: choosing, matching and using a 700 bar system safely
Jacking, pressing, pulling and bolting tools run at 10,000 psi, where a small cylinder lifts tens of tonnes and a mistake is measured in crushed hands. Single and double-acting, hollow plunger, low-height, lock-nut and aluminium cylinders; hand, air and electric pumps; matching oil volume; and the rules that keep a 700 bar lift safe.
10 min read
Instrumentation & gauges
10,000 psi hydraulic gauges: pressure, force and digital gauges for jacking, pressing and bolting
On a 700 bar jacking or bolting system the gauge is the only way to know the load, and the only warning before something gives. 10,000 psi analogue gauges, force gauges that read tonnes directly for a given cylinder, digital gauges, gauge adaptors and snubber valves — and how to fit and read them safely.
6 min read
Cylinders, pumps & motors
Why a hydraulic cylinder drifts: piston seal, valve or oil — and how to test which
A boom that sinks overnight is blamed on the cylinder far more often than the cylinder deserves. Why piston-seal bypass alone rarely drops a load, the valve leakage and thermal contraction that usually do, a safe step-by-step test, and how to read external leaks, scored rods and blown seals.
10 min read







