Enerpac SCH Series Hydraulic Cylinders

Enerpac SCH Series Hydraulic Cylinders: 10 part numbers.
Product description
Enerpac SCH Series Hydraulic Cylinders: 10 part numbers.
Specification
- Type: Hydraulic Cylinder
- Single Acting/double Acting: Single Acting
- Part numbers: 10
Sizes and part numbers
The Sizes & Part Numbers tab lists every Enerpac part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing a cylinder
Choose capacity with margin over the working load, and stroke for the full travel needed. High-pressure tooling cylinders run at up to 700 bar (10,000 psi) and need a matching pump, hose and gauge rated for that pressure.
How to order
Quote the Enerpac part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Cylinder Series | Sch |
| Cylinder Type | Hollow |
| Gauge Scale | 0 ga. to 22200 ga. |
| Included | 10000 psi Composite Material Pump, 6 ft. Thermoplastic Hose, Calibrated Gauge, Gauge Adapter, Single-Acting Hollow Cylinder |
| Pump Type | Hand |
| Single Acting/double Acting | Single Acting |
Shipping & lead time
Sizes & part numbers
10 sizes- Enerpac part no.SCH121H
- Description
- Cylinder With Hand Pump
- Stroke (in)
- —
- Action
- Single Acting
- Enerpac part no.SCH302H
- Description
- Cylinder With Hand Pump
- Stroke (in)
- —
- Action
- Single Acting
- Enerpac part no.SCH202FP
- Description
- Cylinder With Foot Pump
- Stroke (in)
- 2
- Action
- Single Acting
- Enerpac part no.SCH202H
- Description
- Cylinder With Hand Pump
- Stroke (in)
- 2
- Action
- Single Acting
- Enerpac part no.SCH202XA
- Description
- Cylinder With Air Pump
- Stroke (in)
- 2
- Action
- Single Acting
- Enerpac part no.SCH302FP
- Description
- Cylinder With Foot Pump
- Stroke (in)
- 2.5
- Action
- Single Acting
- Enerpac part no.SCH302XA
- Description
- Cylinder With Air Pump
- Stroke (in)
- 2.5
- Action
- Single Acting
- Enerpac part no.SCH603H
- Description
- Cylinder With Hand Pump
- Stroke (in)
- 3
- Action
- Single Acting
Show all 10 sizesShow fewer sizes
- Enerpac part no.SCH603XA
- Description
- Cylinder With Air Pump
- Stroke (in)
- 4
- Action
- Single Acting
- Enerpac part no.SCH1003H
- Description
- Cylinder and Hand Pump Set, 100 ton Cylinder Nominal Capacity, 3 Inch Cylinder Stroke
- Stroke (in)
- 4
- Action
- Single Acting
Description — What this part number is, as the manufacturer lists it. Stroke — Cylinder stroke, as published. Action — Single- or double-acting, as published.
Where and how are the Enerpac SCH series cylinder and pump sets used?▾
Which models are listed for the Enerpac SCH series cylinder and pump sets?▾
How do I choose the right size or model of the Enerpac SCH series cylinder and pump sets?▾
What working pressure applies to the Enerpac SCH series cylinder and pump sets?▾
What are the Enerpac SCH series cylinder and pump sets made from?▾
Which standards apply to the Enerpac SCH series cylinder and pump sets?▾
What do the Enerpac SCH series cylinder and pump sets connect to?▾
How do I fit and look after the Enerpac SCH series cylinder and pump sets?▾
Which industries and jobs use the Enerpac SCH series cylinder and pump sets?▾
How do the Enerpac SCH series cylinder and pump sets differ from the Enerpac SCP series cylinder and pump sets?▾
Where are the Enerpac SCH series cylinder and pump sets shipped from, and what origin and HS code apply?▾
Do you keep the Enerpac SCH series cylinder and pump sets in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Cylinders, pumps & motors
10,000 psi hydraulic cylinders and pumps: choosing, matching and using a 700 bar system safely
Jacking, pressing, pulling and bolting tools run at 10,000 psi, where a small cylinder lifts tens of tonnes and a mistake is measured in crushed hands. Single and double-acting, hollow plunger, low-height, lock-nut and aluminium cylinders; hand, air and electric pumps; matching oil volume; and the rules that keep a 700 bar lift safe.
10 min read
Instrumentation & gauges
10,000 psi hydraulic gauges: pressure, force and digital gauges for jacking, pressing and bolting
On a 700 bar jacking or bolting system the gauge is the only way to know the load, and the only warning before something gives. 10,000 psi analogue gauges, force gauges that read tonnes directly for a given cylinder, digital gauges, gauge adaptors and snubber valves — and how to fit and read them safely.
6 min read
Cylinders, pumps & motors
Why a hydraulic cylinder drifts: piston seal, valve or oil — and how to test which
A boom that sinks overnight is blamed on the cylinder far more often than the cylinder deserves. Why piston-seal bypass alone rarely drops a load, the valve leakage and thermal contraction that usually do, a safe step-by-step test, and how to read external leaks, scored rods and blown seals.
10 min read








