AME International Hydraulic Cylinders

AME International Hydraulic Cylinders, 25 ton. to 100 ton.: 14 part numbers.
Product description
AME International Hydraulic Cylinders, 25 ton. to 100 ton.: 14 part numbers.
Specification
- Type: Hydraulic Cylinder
- Size range: 25 ton. to 100 ton.
- Part numbers: 14
Sizes and part numbers
The Sizes & Part Numbers tab lists every AME International part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing a cylinder
Choose capacity with margin over the working load, and stroke for the full travel needed. High-pressure tooling cylinders run at up to 700 bar (10,000 psi) and need a matching pump, hose and gauge rated for that pressure.
How to order
Quote the AME International part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
14 sizes- AME International part no.13040
- Description
- Hydraulic Cylinder, 10 Ton Capacity, 8 Inch Stroke
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13020
- Description
- Hydraulic Cylinder, 10 Ton Capacity, 4 1/8 Inch Stroke
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13090
- Description
- Cylinder, 25 Ton Capacity, 8 Inch Stroke
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13030
- Description
- Hydraulic Cylinder, 10 Ton Capacity, 6 1/8 Inch Stroke
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13100
- Description
- Cylinder, 25 Ton Capacity, 6 Inch Stroke
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13010
- Description
- Hydraulic Cylinder, 10 Ton Capacity, 2 1/8 Inch Stroke
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13135
- Description
- Aluminium Cylinder, 55 Ton Capacity, 6 Inch Stroke, Base Plate And Shut Off Valve
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13076
- Description
- Low Profile Cylinder, 10 Ton Capacity With Hand Pump And Steel Case
- Capacity (ton)
- —
- Stroke (in)
- 1.5
- Retracted (in)
- —
- Extended (in)
- —
Show all 14 sizesShow fewer sizes
- AME International part no.13050
- Description
- Hydraulic Cylinder, 10 Ton Capacity, 10 1/8 Inch Stroke
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13060
- Description
- Hydraulic Cylinder, 30 Ton Capacity, 2 Inch Stroke
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13164
- Description
- Aluminum Cylinder with Locking Collar, 50 Ton Capacity
- Capacity (ton)
- —
- Stroke (in)
- —
- Retracted (in)
- —
- Extended (in)
- —
- AME International part no.13095
- Description
- Cylinder, 25 Ton Capacity, 10 Inch Stroke
- Capacity (ton)
- 25
- Stroke (in)
- 10.125
- Retracted (in)
- 14.75
- Extended (in)
- —
- AME International part no.12080
- Description
- Aluminum Cylinder with Locking Collar Kit, 55 Ton Capacity, 3.2 Inch Min. Height, 19.1 Inch Max. Height
- Capacity (ton)
- 55
- Stroke (in)
- —
- Retracted (in)
- 3.2
- Extended (in)
- 19.1
- AME International part no.13165
- Description
- Aluminium Cylinder, 100 Ton Capacity With Locking Collar, 6 Inch Stroke
- Capacity (ton)
- 100
- Stroke (in)
- —
- Retracted (in)
- 15.6
- Extended (in)
- —
Description — What this part number is, as the manufacturer lists it. Capacity — Rated capacity in tons, as the manufacturer publishes it. Stroke — Cylinder stroke, as published. Retracted — Length with the rod retracted, as published. Extended — Length with the rod extended, as published.
Pressure, flow, speed, torque and load figures are the manufacturer’s published ratings for that part number. A circuit is limited by its lowest-rated component, so check them against the hose, fittings and valves it connects to.
Where and how are the AME International hydraulic cylinders used?▾
What models and part numbers are listed for the AME International hydraulic cylinders?▾
How do I choose the right size or model of the AME International hydraulic cylinders?▾
What pressure rating do the AME International hydraulic cylinders have?▾
What are the AME International hydraulic cylinders made from?▾
Which standards apply to the AME International hydraulic cylinders?▾
Which parts do the AME International hydraulic cylinders mate with?▾
How do I fit and look after the AME International hydraulic cylinders?▾
Where are the AME International hydraulic cylinders used?▾
How do the AME International hydraulic cylinders differ from Enerpac General Purpose Hydraulic Cylinders?▾
What country of origin and HS code apply to the AME International hydraulic cylinders?▾
Are the AME International hydraulic cylinders available from stock in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Cylinders, pumps & motors
10,000 psi hydraulic cylinders and pumps: choosing, matching and using a 700 bar system safely
Jacking, pressing, pulling and bolting tools run at 10,000 psi, where a small cylinder lifts tens of tonnes and a mistake is measured in crushed hands. Single and double-acting, hollow plunger, low-height, lock-nut and aluminium cylinders; hand, air and electric pumps; matching oil volume; and the rules that keep a 700 bar lift safe.
10 min read
Instrumentation & gauges
10,000 psi hydraulic gauges: pressure, force and digital gauges for jacking, pressing and bolting
On a 700 bar jacking or bolting system the gauge is the only way to know the load, and the only warning before something gives. 10,000 psi analogue gauges, force gauges that read tonnes directly for a given cylinder, digital gauges, gauge adaptors and snubber valves — and how to fit and read them safely.
6 min read
Cylinders, pumps & motors
Why a hydraulic cylinder drifts: piston seal, valve or oil — and how to test which
A boom that sinks overnight is blamed on the cylinder far more often than the cylinder deserves. Why piston-seal bypass alone rarely drops a load, the valve leakage and thermal contraction that usually do, a safe step-by-step test, and how to read external leaks, scored rods and blown seals.
10 min read








