Lead Plug for Kenter and Joining Shackle Pins

Lead Plug for Kenter and Joining Shackle Pins, in 19 sizes. Indus part numbers.
Key features
- Product type: Lead Plug for Kenter and Joining Shackle Pins
- Size range: 12.5 mm chain — Ø10 × 6 mm to 130–137 mm chain — Ø50 × 50 mm
Product description
Lead plug that locks the taper pin of a Kenter or joining shackle.
Sizes
19 sizes, from 12.5 mm chain — Ø10 × 6 mm to 130–137 mm chain — Ø50 × 50 mm. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
No load rating is published for this item. We confirm the rating with the quotation; do not load it until you have that rating in writing.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain diameter and grade the fitting joins, and the certificate you need.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Lead Plug for Kenter and Joining Shackle Pins |
| Sizes | 19 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 12.5 mm chain — Ø10 × 6 mm to 130–137 mm chain — Ø50 × 50 mm |
Compliance
| Parameter | Value |
|---|---|
| Certification | Classification-society certificate (ABS, BV, DNV, LR and others) on request |
Shipping & lead time
Sizes & part numbers
19 sizes- Indus part no.IH-MR-AC-LPL-0125-10X6
- Size
- 12.5 mm chain — Ø10 × 6 mm
- Chain size
- 12.5 mm
- B (mm)
- 6
- Ø (mm)
- 10
- Indus part no.IH-MR-AC-LPL-0125-10X10
- Size
- 12.5 mm chain — Ø10 × 10 mm
- Chain size
- 12.5 mm
- B (mm)
- 10
- Ø (mm)
- 10
- Indus part no.IH-MR-AC-LPL-0125-10X15
- Size
- 12.5 mm chain — Ø10 × 15 mm
- Chain size
- 12.5 mm
- B (mm)
- 15
- Ø (mm)
- 10
- Indus part no.IH-MR-AC-LPL-0140-14X17
- Size
- 14–22 mm chain — Ø14 × 17 mm
- Chain size
- 14–22 mm
- B (mm)
- 17
- Ø (mm)
- 14
- Indus part no.IH-MR-AC-LPL-0140-13X18
- Size
- 14–22 mm chain — Ø13 × 18 mm
- Chain size
- 14–22 mm
- B (mm)
- 18
- Ø (mm)
- 13
- Indus part no.IH-MR-AC-LPL-0140-15X20
- Size
- 14–22 mm chain — Ø15 × 20 mm
- Chain size
- 14–22 mm
- B (mm)
- 20
- Ø (mm)
- 15
- Indus part no.IH-MR-AC-LPL-0240-16X13
- Size
- 24–32 mm chain — Ø16 × 13 mm
- Chain size
- 24–32 mm
- B (mm)
- 13
- Ø (mm)
- 16
- Indus part no.IH-MR-AC-LPL-0340-16X20
- Size
- 34–42 mm chain — Ø16 × 20 mm
- Chain size
- 34–42 mm
- B (mm)
- 20
- Ø (mm)
- 16
Show all 19 sizesShow fewer sizes
- Indus part no.IH-MR-AC-LPL-0440-20X20
- Size
- 44–54 mm chain — Ø20 × 20 mm
- Chain size
- 44–54 mm
- B (mm)
- 20
- Ø (mm)
- 20
- Indus part no.IH-MR-AC-LPL-0560-25X25
- Size
- 56–64 mm chain — Ø25 × 25 mm
- Chain size
- 56–64 mm
- B (mm)
- 25
- Ø (mm)
- 25
- Indus part no.IH-MR-AC-LPL-0660-30X30
- Size
- 66–73 mm chain — Ø30 × 30 mm
- Chain size
- 66–73 mm
- B (mm)
- 30
- Ø (mm)
- 30
- Indus part no.IH-MR-AC-LPL-0760-30X50
- Size
- 76 mm chain — Ø30 × 50 mm
- Chain size
- 76 mm
- B (mm)
- 50
- Ø (mm)
- 30
- Indus part no.IH-MR-AC-LPL-0760-30X45
- Size
- 76 mm chain — Ø30 × 45 mm
- Chain size
- 76 mm
- B (mm)
- 45
- Ø (mm)
- 30
- Indus part no.IH-MR-AC-LPL-0810-35X35
- Size
- 81–92 mm chain — Ø35 × 35 mm
- Chain size
- 81–92 mm
- B (mm)
- 35
- Ø (mm)
- 35
- Indus part no.IH-MR-AC-LPL-0950-40X40
- Size
- 95–100 mm chain — Ø40 × 40 mm
- Chain size
- 95–100 mm
- B (mm)
- 40
- Ø (mm)
- 40
- Indus part no.IH-MR-AC-LPL-1020-45X50
- Size
- 102–107 mm chain — Ø45 × 50 mm
- Chain size
- 102–107 mm
- B (mm)
- 50
- Ø (mm)
- 45
- Indus part no.IH-MR-AC-LPL-1110-45X45
- Size
- 111–117 mm chain — Ø45 × 45 mm
- Chain size
- 111–117 mm
- B (mm)
- 45
- Ø (mm)
- 45
- Indus part no.IH-MR-AC-LPL-1200-49X45
- Size
- 120–127 mm chain — Ø49 × 45 mm
- Chain size
- 120–127 mm
- B (mm)
- 45
- Ø (mm)
- 49
- Indus part no.IH-MR-AC-LPL-1300-50X50
- Size
- 130–137 mm chain — Ø50 × 50 mm
- Chain size
- 130–137 mm
- B (mm)
- 50
- Ø (mm)
- 50
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. B — Dimension B on the manufacturer dimension drawing. Ø — Dimension Ø on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What are Lead Plug for Kenter and Joining Shackle Pins used for?▾
How do I read an Indus part number for Lead Plug for Kenter and Joining Shackle Pins, such as IH-MR-AC-LPL-0125-10X6?▾
What sizes do Lead Plug for Kenter and Joining Shackle Pins come in?▾
How do I choose the right size of Lead Plug for Kenter and Joining Shackle Pins?▾
What load rating does Lead Plug for Kenter and Joining Shackle Pins have?▾
What material and finish is Lead Plug for Kenter and Joining Shackle Pins supplied in?▾
What standard and certificate apply to Lead Plug for Kenter and Joining Shackle Pins?▾
What do Lead Plug for Kenter and Joining Shackle Pins connect to or work with?▾
How should Lead Plug for Kenter and Joining Shackle Pins be inspected and looked after?▾
How do Lead Plug for Kenter and Joining Shackle Pins differ from Anchor Kenter Shackle — Heavy-Duty Pattern?▾
How are Lead Plug for Kenter and Joining Shackle Pins shipped, and can they be exported from Dubai?▾
Do you keep Lead Plug for Kenter and Joining Shackle Pins in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Verschlussstopfen
- fr
- bouchon mâle
- es
- tapón macho
- it
- tappo
From the blog
Written about this part
Anchor chain & mooring
Kenter shackle: how to dismantle and assemble one, and why it is sealed with lead
The Kenter shackle joins lengths of anchor chain without changing the shape of the cable. Its parts, how to take one apart with a punch and hammer, how to put it back together and seal the taper pin with a new lead plug, which lead plug fits which chain size, and the checks before it goes back over the windlass.
4 min read
Anchor chain & mooring
Anchor chain wear limits: the 12% rule and when to renew a length
Anchor chain wears where links rub against each other and the windlass. Classification societies allow the mean diameter to fall 12% below nominal before a length must be renewed. The minimum diameter for every size from 12.5 to 162 mm, how to measure, and the other defects that condemn a length.
4 min read








