Pear-Shaped End Shackle — Grade 3

Pear-Shaped End Shackle, in 9 sizes. Indus part numbers.
Key features
- Product type: Pear-Shaped End Shackle
- Size range: 19–24 mm to 97–102 mm
Product description
Pear-shaped detachable end shackle in Grade 3, joining chain to a larger fitting.
Sizes
9 sizes, from 19–24 mm to 97–102 mm. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Proof and breaking loads are as published for each size. They are test values, not working loads.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain diameter and grade the fitting joins, and the certificate you need.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Pear-Shaped End Shackle |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 19–24 mm to 97–102 mm |
Compliance
| Parameter | Value |
|---|---|
| Certification | Classification-society certificate (ABS, BV, DNV, LR and others) on request |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-MR-AC-PES3-0190
- Size
- 19–24 mm
- Chain size
- 19–24 mm
- Proof load (kg)
- 34,000
- Min breaking load (kg)
- 48,500
- A (mm)
- 199
- B (mm)
- 136
- C (mm)
- 39
- D (mm)
- 26
- E (mm)
- 33
- F (mm)
- 58
- G (mm)
- 26
- H (mm)
- 39
- J (mm)
- 17
- K (mm)
- 30
- Weight (kg)
- 3.6
- Indus part no.IH-MR-AC-PES3-0250
- Size
- 25–30 mm
- Chain size
- 25–30 mm
- Proof load (kg)
- 53,000
- Min breaking load (kg)
- 75,700
- A (mm)
- 245
- B (mm)
- 172
- C (mm)
- 47
- D (mm)
- 31
- E (mm)
- 40
- F (mm)
- 66
- G (mm)
- 37
- H (mm)
- 45
- J (mm)
- 19
- K (mm)
- 35
- Weight (kg)
- 6.5
- Indus part no.IH-MR-AC-PES3-0320
- Size
- 32–40 mm
- Chain size
- 32–40 mm
- Proof load (kg)
- 91,367
- Min breaking load (kg)
- 130,524
- A (mm)
- 302
- B (mm)
- 206
- C (mm)
- 63
- D (mm)
- 41
- E (mm)
- 49
- F (mm)
- 83
- G (mm)
- 42
- H (mm)
- 58
- J (mm)
- 26
- K (mm)
- 43
- Weight (kg)
- 13
- Indus part no.IH-MR-AC-PES3-0420
- Size
- 42–51 mm
- Chain size
- 42–51 mm
- Proof load (kg)
- 145,513
- Min breaking load (kg)
- 207,512
- A (mm)
- 381
- B (mm)
- 263
- C (mm)
- 77
- D (mm)
- 52
- E (mm)
- 68
- F (mm)
- 100
- G (mm)
- 58
- H (mm)
- 74
- J (mm)
- 32
- K (mm)
- 52
- Weight (kg)
- 27
- Indus part no.IH-MR-AC-PES3-0520
- Size
- 52–60 mm
- Chain size
- 52–60 mm
- Proof load (kg)
- 197,825
- Min breaking load (kg)
- 282,461
- A (mm)
- 462
- B (mm)
- 315
- C (mm)
- 94
- D (mm)
- 62
- E (mm)
- 81
- F (mm)
- 113
- G (mm)
- 64
- H (mm)
- 90
- J (mm)
- 38
- K (mm)
- 65
- Weight (kg)
- 49
- Indus part no.IH-MR-AC-PES3-0620
- Size
- 62–79 mm
- Chain size
- 62–79 mm
- Proof load (kg)
- 329,674
- Min breaking load (kg)
- 469,987
- A (mm)
- 568
- B (mm)
- 379
- C (mm)
- 121
- D (mm)
- 81
- E (mm)
- 97
- F (mm)
- 153
- G (mm)
- 84
- H (mm)
- 116
- J (mm)
- 48
- K (mm)
- 76
- Weight (kg)
- 95
- Indus part no.IH-MR-AC-PES3-0810
- Size
- 81–92 mm
- Chain size
- 81–92 mm
- Proof load (kg)
- 434,399
- Min breaking load (kg)
- 619,987
- A (mm)
- 658
- B (mm)
- 422
- C (mm)
- 139
- D (mm)
- 96
- E (mm)
- 135
- F (mm)
- 155
- G (mm)
- 112
- H (mm)
- 135
- J (mm)
- 54
- K (mm)
- 79
- Weight (kg)
- 150
- Indus part no.IH-MR-AC-PES3-0940
- Size
- 94–95 mm
- Chain size
- 94–95 mm
- Proof load (kg)
- 459,892
- Min breaking load (kg)
- 656,697
- A (mm)
- 700
- B (mm)
- 440
- C (mm)
- 148
- D (mm)
- 98
- E (mm)
- 130
- F (mm)
- 159
- G (mm)
- 124
- H (mm)
- 148
- J (mm)
- 57
- K (mm)
- 89
- Weight (kg)
- 236
Show all 9 sizesShow fewer sizes
- Indus part no.IH-MR-AC-PES3-0970
- Size
- 97–102 mm
- Chain size
- 97–102 mm
- Proof load (kg)
- 522,095
- Min breaking load (kg)
- 746,432
- A (mm)
- 900
- B (mm)
- 580
- C (mm)
- 194
- D (mm)
- 122
- E (mm)
- 168
- F (mm)
- 194
- G (mm)
- 130
- H (mm)
- 181
- J (mm)
- 73
- K (mm)
- 108
- Weight (kg)
- 386
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. J — Dimension J on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is Pear-Shaped End Shackle, Grade 3 used for?▾
How do I read an Indus part number for Pear-Shaped End Shackle, Grade 3, such as IH-MR-AC-PES3-0190?▾
What sizes does Pear-Shaped End Shackle, Grade 3 come in?▾
How do I choose the right size of Pear-Shaped End Shackle, Grade 3?▾
What load rating does Pear-Shaped End Shackle, Grade 3 have?▾
What material and finish is Pear-Shaped End Shackle, Grade 3 supplied in?▾
What standard and certificate apply to Pear-Shaped End Shackle, Grade 3?▾
What does Pear-Shaped End Shackle, Grade 3 connect to or work with?▾
How should Pear-Shaped End Shackle, Grade 3 be inspected and looked after?▾
How does Pear-Shaped End Shackle, Grade 3 differ from Pear-Shaped End Shackle — Grade R4?▾
How are Pear-Shaped End Shackle, Grade 3 shipped, and can they be exported from Dubai?▾
Do you keep Pear-Shaped End Shackle, Grade 3 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read
Anchor chain & mooring
Anchor chain testing: proof load, breaking load, mechanical tests and NDT
Before a length of anchor chain is certified it is proof loaded end to end, sampled for a break test, tested for strength and toughness, and — for offshore chain — examined link by link. What each test is, how samples are chosen, what counts as a pass, and the separate rules for shackles, swivels and links.
4 min read
Anchor chain & mooring
Kenter shackle: how to dismantle and assemble one, and why it is sealed with lead
The Kenter shackle joins lengths of anchor chain without changing the shape of the cable. Its parts, how to take one apart with a punch and hammer, how to put it back together and seal the taper pin with a new lead plug, which lead plug fits which chain size, and the checks before it goes back over the windlass.
4 min read








