End Fastening for Anchor Chain Cable — DIN 81860

End Fastening for Anchor Chain Cable, in 10 sizes. Indus part numbers.
Key features
- Product type: End Fastening for Anchor Chain Cable
- Pattern / standard: DIN 81860
- Size range: 36–46 mm to 142–152 mm
Product description
End fastening for anchor chain cable to DIN 81860.
Sizes
10 sizes, from 36–46 mm to 142–152 mm. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the standard, nominal size and SWL, and whether the fitting is welded or bolted to the deck.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | End Fastening for Anchor Chain Cable |
| Pattern / standard | DIN 81860 |
| Sizes | 10 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 36–46 mm to 142–152 mm |
Shipping & lead time
Sizes & part numbers
10 sizes- Indus part no.IH-MR-DF-EFC-0360
- Size
- 36–46 mm
- Chain size
- 36–46 mm
- l1 (mm)
- 735
- s1 (mm)
- 12.5
- u1 (mm)
- 75
- v1 (mm)
- 10
- v2 (mm)
- 75
- Ød1 (mm)
- 273
- Ød2 (mm)
- 375
- Indus part no.IH-MR-DF-EFC-0480
- Size
- 48–56 mm
- Chain size
- 48–56 mm
- l1 (mm)
- 835
- s1 (mm)
- 14.2
- u1 (mm)
- 95
- v1 (mm)
- 12
- v2 (mm)
- 90
- Ød1 (mm)
- 323.9
- Ød2 (mm)
- 440
- Indus part no.IH-MR-DF-EFC-0580
- Size
- 58–68 mm
- Chain size
- 58–68 mm
- l1 (mm)
- 995
- s1 (mm)
- 16
- u1 (mm)
- 110
- v1 (mm)
- 14
- v2 (mm)
- 95
- Ød1 (mm)
- 406.4
- Ød2 (mm)
- 540
- Indus part no.IH-MR-DF-EFC-0700
- Size
- 70–81 mm
- Chain size
- 70–81 mm
- l1 (mm)
- 1,245
- s1 (mm)
- 17.5
- u1 (mm)
- 105
- v1 (mm)
- 15
- v2 (mm)
- 100
- Ød1 (mm)
- 508
- Ød2 (mm)
- 645
- Indus part no.IH-MR-DF-EFC-0840
- Size
- 84–92 mm
- Chain size
- 84–92 mm
- l1 (mm)
- 1,245
- s1 (mm)
- 17.5
- u1 (mm)
- 130
- v1 (mm)
- 15
- v2 (mm)
- 150
- Ød1 (mm)
- 508
- Ød2 (mm)
- 645
- Indus part no.IH-MR-DF-EFC-0950
- Size
- 95–105 mm
- Chain size
- 95–105 mm
- l1 (mm)
- 1,430
- s1 (mm)
- 20
- u1 (mm)
- 130
- v1 (mm)
- 18
- v2 (mm)
- 150
- Ød1 (mm)
- 610
- Ød2 (mm)
- 754
- Indus part no.IH-MR-DF-EFC-1070
- Size
- 107–114 mm
- Chain size
- 107–114 mm
- l1 (mm)
- 1,430
- s1 (mm)
- 20
- u1 (mm)
- 170
- v1 (mm)
- 18
- v2 (mm)
- 185
- Ød1 (mm)
- 610
- Ød2 (mm)
- 754
- Indus part no.IH-MR-DF-EFC-1170
- Size
- 117–127 mm
- Chain size
- 117–127 mm
- l1 (mm)
- 1,615
- s1 (mm)
- 22.2
- u1 (mm)
- 170
- v1 (mm)
- 20
- v2 (mm)
- 185
- Ød1 (mm)
- 711
- Ød2 (mm)
- 856
Show all 10 sizesShow fewer sizes
- Indus part no.IH-MR-DF-EFC-1300
- Size
- 130–137 mm
- Chain size
- 130–137 mm
- l1 (mm)
- 1,790
- s1 (mm)
- 22.2
- u1 (mm)
- 170
- v1 (mm)
- 20
- v2 (mm)
- 185
- Ød1 (mm)
- 813
- Ød2 (mm)
- 958
- Indus part no.IH-MR-DF-EFC-1420
- Size
- 142–152 mm
- Chain size
- 142–152 mm
- l1 (mm)
- 1,970
- s1 (mm)
- 25
- u1 (mm)
- 190
- v1 (mm)
- 22
- v2 (mm)
- 200
- Ød1 (mm)
- 914
- Ød2 (mm)
- 1,060
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. l1 — Dimension l1 on the manufacturer dimension drawing. s1 — Dimension s1 on the manufacturer dimension drawing. u1 — Dimension u1 on the manufacturer dimension drawing. v1 — Dimension v1 on the manufacturer dimension drawing. v2 — Dimension v2 on the manufacturer dimension drawing. Ød1 — Dimension Ød1 on the manufacturer dimension drawing. Ød2 — Dimension Ød2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the End Fastening for Anchor Chain Cable — DIN 81860 used for?▾
How do I read End Fastening for Anchor Chain Cable — DIN 81860 part numbers such as IH-MR-DF-EFC-0360?▾
Which sizes does the End Fastening for Anchor Chain Cable — DIN 81860 come in?▾
How should I pick the size of End Fastening for Anchor Chain Cable — DIN 81860 for my job?▾
What is the rated capacity of the End Fastening for Anchor Chain Cable — DIN 81860?▾
What is the End Fastening for Anchor Chain Cable — DIN 81860 made from and how is it finished?▾
What standard and certificate apply to the End Fastening for Anchor Chain Cable — DIN 81860?▾
What do I use with the End Fastening for Anchor Chain Cable — DIN 81860?▾
How do I install and check the End Fastening for Anchor Chain Cable — DIN 81860?▾
How does the End Fastening for Anchor Chain Cable — DIN 81860 compare with the Chain Locker Securing Device?▾
Can you export the End Fastening for Anchor Chain Cable — DIN 81860 from Dubai?▾
Do you hold the End Fastening for Anchor Chain Cable — DIN 81860 for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read








