Dinamic Oil Negative Multi-Disc Brakes for Planetary Gearboxes — 110 to 3,051 Nm

Dinamic Oil F1, F2, F5, F6, F8, F9 and MD negative multi-disc parking brakes for RE, RA, GB and GBA planetary gearboxes: 52 models, 110 to 3,051 Nm static torque, SAE A, C, D, ST and MU inputs. From Indus Hydraulics, authorised Dinamic Oil distributor, UAE.
Key features
- Product type: Negative multi-disc parking brake
- Series: Dinamic Oil F1, F2, F5, F6, F8, F9, MD
- Execution: Spring applied, hydraulically released
- Output torque: 110 to 3,051 Nm static (±5 %)
- Motor / input: SAE A, SAE C, SAE D, ST, MU, MLR direct flange
- Product type
- Negative multi-disc parking brake
- Series
- Dinamic Oil F1, F2, F5, F6, F8, F9, MD
Product description
Dinamic Oil's negative multi-disc brakes are the static parking brakes fitted between the motor and the input of its RE, RA, GB and GBA planetary gearboxes — and of the slewing drives built on them. Springs clamp tempered steel discs alternating with bronze discs; hydraulic pressure on the release port pushes a piston against the springs and frees the drive. With no pressure the brake holds, so it locks the load whenever the motor stops or the circuit loses pressure.
Indus Hydraulics is an authorised Dinamic Oil distributor and supplies direct from Dinamic Oil's factory in Bomporto, Italy.
Range
Seven families and 52 models, from 110 Nm to 3,051 Nm static braking torque (±5 %):
- F1 and F2 — for orbital hydraulic motors on an SAE A flange, Ø186 and Ø244 input groups, 132 to 608 Nm.
- F5 and F6 — ST universal input for a wide range of motors, 110 to 1,150 Nm.
- F8 — MU or ST input, 1,271 to 3,051 Nm.
- F9 — SAE C, SAE D or ST input, 200 to 1,325 Nm, with an optional sprag-clutch freewheel.
- MD — direct flange for MLR orbital motors on RE 110 to 240 stages, 220 to 459 Nm.
The table lists each model's braking torque, the release (opening) and maximum pressures, the maximum input speed, and the gearbox frames it fits. F5, F6, F8 and F9 come in special versions for input speeds up to 3,500 rpm.
Selecting a brake
The braking torque times the gearbox ratio, divided by the gearbox efficiency, must be at least the output torque to be held — and, except in special cases, must not exceed the gearbox's T2max. Catalogue torque is at zero release pressure: any back-pressure in the release line reduces it in proportion, actual torque = catalogue torque × (opening pressure − back-pressure) ÷ opening pressure, so drain the brake line freely to tank. F1, F2 and the standard F5, F6 and F8 hold about 0.1 L of ISO VG 32 mineral oil, changed with the gearbox oil.
Identification
| Parameter | Value |
|---|---|
| Product type | Negative multi-disc parking brake |
| Series | Dinamic Oil F1, F2, F5, F6, F8, F9, MD |
| Execution | Spring applied, hydraulically released |
Performance
| Parameter | Value |
|---|---|
| Output torque | 110 to 3,051 Nm static (±5 %) |
Hydraulics
| Parameter | Value |
|---|---|
| Working pressure | Opens at 10 to 87 bar; max 150 to 300 bar |
Construction
| Parameter | Value |
|---|---|
| Motor / input | SAE A, SAE C, SAE D, ST, MU, MLR direct flange |
| Output / mounting | Fits RE, RA, GB, GBA planetary and slewing gearboxes |
| Lubrication | About 0.1 L ISO VG 32 (F1, F2, F5, F6, F8) |
Supply
| Parameter | Value |
|---|---|
| Made in | Italy (Dinamic Oil S.p.A., Bomporto) |
| Supply | Authorised distributor, direct from the factory |
Shipping & lead time
Sizes & part numbers
52 sizes- Indus part no.IH-DO-BRK-F01
- Description
- F01 — SAE A orbital-motor flange, Ø186 input; opens at 23 bar, max 300 bar
- Max speed (rpm)
- 700
- Brake torque (Nm)
- 132
- Mount
- Fits RE 110–8000; GB 12010–16000
- Indus part no.IH-DO-BRK-F10
- Description
- F10 — SAE A orbital-motor flange, Ø186 input; opens at 29 bar, max 300 bar
- Max speed (rpm)
- 700
- Brake torque (Nm)
- 133
- Mount
- Fits RE 110–8000; GB 12010–16000
- Indus part no.IH-DO-BRK-F11
- Description
- F11 — SAE A orbital-motor flange, Ø186 input; opens at 34 bar, max 300 bar
- Max speed (rpm)
- 700
- Brake torque (Nm)
- 182
- Mount
- Fits RE 110–8000; GB 12010–16000
- Indus part no.IH-DO-BRK-F12
- Description
- F12 — SAE A orbital-motor flange, Ø186 input; opens at 26 bar, max 300 bar
- Max speed (rpm)
- 700
- Brake torque (Nm)
- 235
- Mount
- Fits RE 110–8000; GB 12010–16000
- Indus part no.IH-DO-BRK-F13
- Description
- F13 — SAE A orbital-motor flange, Ø186 input; opens at 30 bar, max 300 bar
- Max speed (rpm)
- 700
- Brake torque (Nm)
- 332
- Mount
- Fits RE 110–8000; GB 12010–16000
- Indus part no.IH-DO-BRK-F14
- Description
- F14 — SAE A orbital-motor flange, Ø186 input; opens at 36 bar, max 300 bar
- Max speed (rpm)
- 700
- Brake torque (Nm)
- 468
- Mount
- Fits RE 110–8000; GB 12010–16000
- Indus part no.IH-DO-BRK-F05
- Description
- F05 — SAE A orbital-motor flange, Ø186 input; opens at 39 bar, max 300 bar
- Max speed (rpm)
- 700
- Brake torque (Nm)
- 530
- Mount
- Fits RE 110–8000; GB 12010–16000
- Indus part no.IH-DO-BRK-F16
- Description
- F16 — SAE A orbital-motor flange, Ø186 input; opens at 42 bar, max 300 bar
- Max speed (rpm)
- 700
- Brake torque (Nm)
- 608
- Mount
- Fits RE 110–8000; GB 12010–16000
Show all 52 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. Max speed — Maximum shaft speed, as published. Brake torque — Static torque of the negative (spring-applied) brake, as published. Mount — Mounting flange or pattern, as published.
Pressure, flow, speed, torque and load figures are the manufacturer’s published ratings for that part number. A circuit is limited by its lowest-rated component, so check them against the hose, fittings and valves it connects to.
What are Dinamic Oil negative multi-disc brakes for planetary gearboxes?▾
How do I read brake codes such as F01, F501, F915 and MD45?▾
What torque range do the Dinamic Oil planetary gearbox brakes cover?▾
How do I select a brake for a planetary gearbox?▾
What are the opening and maximum pressures of these brakes?▾
Why does my planetary gearbox brake slip under load?▾
Which motors and gearbox frames do the brakes fit?▾
How is the planetary gearbox brake lubricated and serviced?▾
Can the brakes handle high input speeds?▾
What is the difference between these gearbox brakes and the winch drive brakes?▾
Are Dinamic Oil planetary gearbox brakes from Indus Hydraulics genuine?▾
Do you supply Dinamic Oil planetary gearbox brakes from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Safety & HSE
Crane winch load monitoring: limit switches, pull limiters, load cells and ELD
A crane winch can stop itself at the end of the rope, refuse to lift an overload, or tell the operator exactly what is on the hook. What each kind of winch load protection does, how it measures, and which one a crane needs.
4 min read
Lifting & rigging
Choosing a recovery winch for tow trucks: pull, cable, freewheel and fairlead
A recovery winch is sized on the pull it needs on the layer it works from, then fitted out for the job: freewheel to walk the cable out, a fairlead for angled pulls, and the right cable. How to choose one, with Dinamic Oil’s T series as the worked example.
3 min read
Maintenance & reliability
Sugar mill gearbox drives: planetary drives for mills, diffusers and cane handling
A sugar factory runs dozens of drives through a crushing season, from the cane carrier to the dryer, and the mill drives carry millions of newton-metres. Where planetary gearboxes fit in a cane mill, how mill drives are sized, and what to check for continuous seasonal duty.
3 min read



