Cutting Ring for 24° Cone End Nut
Cutting Ring for 24° Cone End Nut — DIN 2353 family cutting ring for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: cutting-ring
- Port A Thread: Cutting ring for DIN 2353 bite-type fitting (sizes L6 to L42, S6 to S38)
- Port A Sealing: none
- Nominal Size Range: L6 to L42 (light series), S6 to S38 (heavy series)
- Body Configuration
- cutting-ring
- Port A Thread
- Cutting ring for DIN 2353 bite-type fitting (sizes L6 to L42, S6 to S38)
- Port A Sealing
- none
- Nominal Size Range
- L6 to L42 (light series), S6 to S38 (heavy series)
Product description
The Cutting Ring for 24° Cone End Nut is a Cutting ring hydraulic adapter in the DIN 2353 family. Cutting Ring for 24° Cone End Nut — DIN 2353 family cutting ring for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Cutting ring
- Port A: Female — Cutting ring for DIN 2353 bite-type fitting (sizes L6 to L42, S6 to S38) (No threaded seal)
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
Working pressure matches the host port grade and the lowest-rated component in the assembly. Operating temperature -40°C to +120°C.. DIN 2353 family — DIN 2353 / ISO 8434-1 — 24° cone bite-type fittings using a hardened cutting-ring that grips the hardened-tube OD on assembly. The de-facto standard for hydraulic tube connections in Europe.
Applicable Standards
- DIN 2353
- ISO 8434-1
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | cutting-ring |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | Cutting ring for DIN 2353 bite-type fitting (sizes L6 to L42, S6 to S38) |
| Port A Sealing | none |
| Port A Gender | female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | L6 to L42 (light series), S6 to S38 (heavy series) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 2353, ISO 8434-1 |
Shipping & lead time
What thread family does this adapter use?▾
What are the port specs?▾
What sizes are available?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Is this adapter interchangeable with other thread families?▾
Do I need to crimp this onto a hose?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Innengewinde 24° Konus Schneidring
- fr
- femelle cône 24° bague coupante
- es
- hembra cono 24° anillo cortante
- it
- femmina cono 24° anello tagliente
Engineers viewing this also looked at
24° Cone End Nut
Union Cross
Pump Connector
Swivel Nut Run Tee (DIN 2353)
Swivel Nut Branch Tee (DIN 2353)
Adjustable BranchTee
Adjustable Branch Tee m Metric X m SAE X m Metric
