Cryogenic Gate Valve, Extended Bonnet

Cryogenic gate valves to BS 6364: NPS 1/2" to 52", Class 150 to 2500, -196 °C, cast or forged stainless steel with extended bonnet, cavity relief and low-emission packing.
Key features
- Valve type: Gate valve, cryogenic
- Construction: Extended bonnet, flexible wedge with cavity relief
- Design standard: BS 6364, API 600, API 602, ASME B16.34
- Size range: NPS 1/2" to 52" (DN15 to DN1300)
- Pressure class: ASME Class 150 to 2500
- Body material: Stainless steel (CF8, CF8M, CF3, CF3M) and forged stainless
- End connections: RF, RTJ flanged; butt-weld; socket weld on forged sizes
- Operation: Handwheel, gear operator or actuator
- Valve type
- Gate valve, cryogenic
- Design standard
- BS 6364, API 600, API 602, ASME B16.34
- Pressure class
- ASME Class 150 to 2500
- End connections
- RF, RTJ flanged; butt-weld; socket weld on forged sizes
- Operation
- Handwheel, gear operator or actuator
Product description
Isolation for LNG, LPG, liquid nitrogen and oxygen lines. The extended bonnet lifts the gland well above the cold body so the packing stays at near-ambient temperature, and the wedge carries a cavity relief so liquid trapped between the seats cannot over-pressurise the body as it warms.
Cryogenic valves handle liquefied gases: LNG at -162 °C, liquid nitrogen and oxygen near -196 °C, LPG and ethylene. An extended bonnet keeps the stem packing above the cold zone, the body and trim are stainless steels that stay tough when cold, and the design is cold-tested before it ships.
Construction
- Extended bonnet, length to BS 6364 for the service temperature
- Flexible wedge with cavity relief hole on the upstream side
- Cast (CF8, CF8M, CF3, CF3M) or forged stainless body
- Low-emission packing to ISO 15848; gear operator or actuator on request
Sizes and ratings
Published range: NPS 1/2" to 52" (DN15 to DN1300), ASME Class 150 to 2500, in stainless steel (cf8, cf8m, cf3, cf3m) and forged stainless. End connections: RF, RTJ flanged; butt-weld; socket weld on forged sizes. Operation: handwheel, gear operator or actuator.
The size table below lists 62 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire.
Testing and documents
Shell and seat tests to API 598, with cryogenic tests to BS 6364 in liquid nitrogen, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Cryogenic gate valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other cryogenic and liquid hydrogen valves in the range, for comparison when the duty is not settled yet: Cryogenic Globe Valve, Extended Bonnet, Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow, Top Entry Cryogenic Trunnion Mounted Ball Valve, Top Entry Cryogenic Floating Ball Valve.
Identification
| Parameter | Value |
|---|---|
| Valve type | Gate valve, cryogenic |
| Construction | Extended bonnet, flexible wedge with cavity relief |
Standards
| Parameter | Value |
|---|---|
| Design standard | BS 6364, API 600, API 602, ASME B16.34 |
| Pressure testing | Shell and seat tests to API 598, with cryogenic tests to BS 6364 in liquid nitrogen |
| Fugitive emissions | Low-emission packing to ISO 15848 |
Range
| Parameter | Value |
|---|---|
| Size range | NPS 1/2" to 52" (DN15 to DN1300) |
| Pressure class | ASME Class 150 to 2500 |
| Temperature range | -196 °C to 80 °C |
Materials
| Parameter | Value |
|---|---|
| Body material | Stainless steel (CF8, CF8M, CF3, CF3M) and forged stainless |
Construction
| Parameter | Value |
|---|---|
| End connections | RF, RTJ flanged; butt-weld; socket weld on forged sizes |
| Operation | Handwheel, gear operator or actuator |
Application
| Parameter | Value |
|---|---|
| Typical service | LNG, LPG, liquid nitrogen and oxygen, air separation |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
Sizes & part numbers
62 sizes- Indus part no.IH-PV-CGT-CS-150-0200
- Type
- Cast
- Size
- 2"
- DN
- 50
- Class
- Class 150
- Port
- —
- L (RF) (mm)
- 178
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 216
- d (mm)
- —
- E (mm)
- —
- H (mm)
- 480
- H1 (mm)
- —
- K (mm)
- 125
- L (mm)
- —
- W (mm)
- 250
- Weight (kg)
- —
- Indus part no.IH-PV-CGT-CS-150-0300
- Type
- Cast
- Size
- 3"
- DN
- 80
- Class
- Class 150
- Port
- —
- L (RF) (mm)
- 203
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 283
- d (mm)
- —
- E (mm)
- —
- H (mm)
- 560
- H1 (mm)
- —
- K (mm)
- 150
- L (mm)
- —
- W (mm)
- 300
- Weight (kg)
- —
- Indus part no.IH-PV-CGT-CS-150-0400
- Type
- Cast
- Size
- 4"
- DN
- 100
- Class
- Class 150
- Port
- —
- L (RF) (mm)
- 229
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 305
- d (mm)
- —
- E (mm)
- —
- H (mm)
- 640
- H1 (mm)
- —
- K (mm)
- 150
- L (mm)
- —
- W (mm)
- 300
- Weight (kg)
- —
- Indus part no.IH-PV-CGT-CS-150-0600
- Type
- Cast
- Size
- 6"
- DN
- 150
- Class
- Class 150
- Port
- —
- L (RF) (mm)
- 267
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 403
- d (mm)
- —
- E (mm)
- —
- H (mm)
- 855
- H1 (mm)
- —
- K (mm)
- 250
- L (mm)
- —
- W (mm)
- 400
- Weight (kg)
- —
- Indus part no.IH-PV-CGT-CS-150-0800
- Type
- Cast
- Size
- 8"
- DN
- 200
- Class
- Class 150
- Port
- —
- L (RF) (mm)
- 292
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 419
- d (mm)
- —
- E (mm)
- —
- H (mm)
- 1110
- H1 (mm)
- —
- K (mm)
- 300
- L (mm)
- —
- W (mm)
- 450
- Weight (kg)
- —
- Indus part no.IH-PV-CGT-CS-150-1000
- Type
- Cast
- Size
- 10"
- DN
- 250
- Class
- Class 150
- Port
- —
- L (RF) (mm)
- 330
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 457
- d (mm)
- —
- E (mm)
- —
- H (mm)
- 1265
- H1 (mm)
- —
- K (mm)
- 350
- L (mm)
- —
- W (mm)
- 550
- Weight (kg)
- —
- Indus part no.IH-PV-CGT-CS-150-1200
- Type
- Cast
- Size
- 12"
- DN
- 300
- Class
- Class 150
- Port
- —
- L (RF) (mm)
- 356
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 502
- d (mm)
- —
- E (mm)
- 260
- H (mm)
- 1965
- H1 (mm)
- 1453
- K (mm)
- 400
- L (mm)
- —
- W (mm)
- 460
- Weight (kg)
- —
- Indus part no.IH-PV-CGT-CS-150-1400
- Type
- Cast
- Size
- 14"
- DN
- 350
- Class
- Class 150
- Port
- —
- L (RF) (mm)
- 381
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 572
- d (mm)
- —
- E (mm)
- 260
- H (mm)
- 2180
- H1 (mm)
- 1620
- K (mm)
- 450
- L (mm)
- —
- W (mm)
- 460
- Weight (kg)
- —
Show all 62 sizesShow fewer sizes
Type — Valve type of this row, where one listing covers several. Size — Nominal pipe size (NPS), as published. DN — Nominal diameter (DN), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. Port — Full bore or reduced bore, as published. L (RF) — Face-to-face length with raised-face flanged ends, as published. L (RTJ) — Face-to-face length with ring-type-joint flanged ends, as published. L (BW) — End-to-end length with butt-weld ends, as published. d — Dimension d on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. H1 — Dimension H1 on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. W — Dimension W on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
Lengths are in millimetres and weights in kilograms, as published for each size and class. The end connection, trim, seat and operator you order can change the length and weight, so we confirm the general arrangement drawing with the quotation.
What is the Cryogenic Gate Valve, Extended Bonnet and where is it used?▾
What do the NPS and Class ratings of the Cryogenic Gate Valve, Extended Bonnet mean?▾
What sizes and dimensions does the Cryogenic Gate Valve, Extended Bonnet come in?▾
What pressure class and temperature range does the Cryogenic Gate Valve, Extended Bonnet cover?▾
What is the Cryogenic Gate Valve, Extended Bonnet made of, and how is it built?▾
Which standards and tests apply to the Cryogenic Gate Valve, Extended Bonnet?▾
Which end connections and operators does the Cryogenic Gate Valve, Extended Bonnet have?▾
Why does a cryogenic gate valve have a relief hole on the Cryogenic Gate Valve, Extended Bonnet?▾
What service is the Cryogenic Gate Valve, Extended Bonnet used for?▾
How does the Cryogenic Gate Valve, Extended Bonnet differ from the Cryogenic Globe Valve, Extended Bonnet?▾
Can the Cryogenic Gate Valve, Extended Bonnet be supplied against a project specification or vendor list?▾
Do you stock the Cryogenic Gate Valve, Extended Bonnet in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








