Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow

Cryogenic check valves to BS 6364: swing, forged lift, dual plate and axial flow, NPS 1/2" to 64", Class 150 to 2500, -196 °C, stainless steel, for LNG and liquefied gas lines.
Key features
- Valve type: Check valve, cryogenic (swing, lift, dual plate, axial flow)
- Construction: Swing, piston lift, dual plate or axial flow
- Design standard: BS 6364, BS 1868, API 594, API 602, ASME B16.34
- Size range: NPS 1/2" to 64" (DN15 to DN1600)
- Pressure class: ASME Class 150 to 2500
- Body material: Stainless steel, cast and forged
- End connections: RF, RTJ flanged; butt-weld; wafer and lug (dual plate); socket weld on forged sizes
- Operation: Self-acting
- Valve type
- Check valve, cryogenic (swing, lift, dual plate, axial flow)
- Design standard
- BS 6364, BS 1868, API 594, API 602, ASME B16.34
- Pressure class
- ASME Class 150 to 2500
- End connections
- RF, RTJ flanged; butt-weld; wafer and lug (dual plate); socket weld on forged sizes
- Operation
- Self-acting
Product description
Non-return valves for liquefied gas service, in four designs. Swing checks suit most horizontal lines; forged lift checks the small bores; dual-plate checks save weight and length; axial-flow checks close fast and quietly on pump and compressor discharges, where a slam would damage the line.
Cryogenic valves handle liquefied gases: LNG at -162 °C, liquid nitrogen and oxygen near -196 °C, LPG and ethylene. An extended bonnet keeps the stem packing above the cold zone, the body and trim are stainless steels that stay tough when cold, and the design is cold-tested before it ships.
Construction
- Swing: bolted cover, hinged disc
- Lift (forged): guided piston disc, small bores
- Dual plate: twin spring-loaded plates in wafer, lug or flanged bodies
- Axial flow: spring-assisted nozzle disc, long or short pattern
Sizes and ratings
Published range: NPS 1/2" to 64" (DN15 to DN1600), ASME Class 150 to 2500, in stainless steel, cast and forged. End connections: RF, RTJ flanged; butt-weld; wafer and lug (dual plate); socket weld on forged sizes. Operation: self-acting.
The size table below lists 520 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire.
Testing and documents
Shell and seat tests to API 598, with cryogenic tests to BS 6364 in liquid nitrogen, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Cryogenic check valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other cryogenic and liquid hydrogen valves in the range, for comparison when the duty is not settled yet: Top Entry Cryogenic Trunnion Mounted Ball Valve, Top Entry Cryogenic Floating Ball Valve, Side Entry Cryogenic Floating Ball Valve, Side Entry Cryogenic Trunnion Mounted Ball Valve.
Identification
| Parameter | Value |
|---|---|
| Valve type | Check valve, cryogenic (swing, lift, dual plate, axial flow) |
| Construction | Swing, piston lift, dual plate or axial flow |
Standards
| Parameter | Value |
|---|---|
| Design standard | BS 6364, BS 1868, API 594, API 602, ASME B16.34 |
| Pressure testing | Shell and seat tests to API 598, with cryogenic tests to BS 6364 in liquid nitrogen |
Range
| Parameter | Value |
|---|---|
| Size range | NPS 1/2" to 64" (DN15 to DN1600) |
| Pressure class | ASME Class 150 to 2500 |
| Temperature range | -196 °C to 80 °C |
Materials
| Parameter | Value |
|---|---|
| Body material | Stainless steel, cast and forged |
Construction
| Parameter | Value |
|---|---|
| End connections | RF, RTJ flanged; butt-weld; wafer and lug (dual plate); socket weld on forged sizes |
| Operation | Self-acting |
Application
| Parameter | Value |
|---|---|
| Typical service | LNG, LPG, liquefied gases, pump and compressor discharge |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
Sizes & part numbers
520 sizes- Indus part no.IH-PV-CCK-AL-150-0200
- Type
- Axial, long pattern
- Size
- 2"
- DN
- 50
- Class
- Class 150
- Port
- —
- Face to face (mm)
- —
- L (RF) (mm)
- 203
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 203
- D (mm)
- 51
- d (mm)
- —
- H (mm)
- —
- L (mm)
- —
- Weight (flanged) (kg)
- —
- Weight (BW) (kg)
- —
- Weight (kg)
- 14
- Indus part no.IH-PV-CCK-AL-150-0300
- Type
- Axial, long pattern
- Size
- 3"
- DN
- 80
- Class
- Class 150
- Port
- —
- Face to face (mm)
- —
- L (RF) (mm)
- 241
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 241
- D (mm)
- 76
- d (mm)
- —
- H (mm)
- —
- L (mm)
- —
- Weight (flanged) (kg)
- —
- Weight (BW) (kg)
- —
- Weight (kg)
- 24
- Indus part no.IH-PV-CCK-AL-150-0400
- Type
- Axial, long pattern
- Size
- 4"
- DN
- 100
- Class
- Class 150
- Port
- —
- Face to face (mm)
- —
- L (RF) (mm)
- 292
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 292
- D (mm)
- 102
- d (mm)
- —
- H (mm)
- —
- L (mm)
- —
- Weight (flanged) (kg)
- —
- Weight (BW) (kg)
- —
- Weight (kg)
- 39
- Indus part no.IH-PV-CCK-AL-150-0600
- Type
- Axial, long pattern
- Size
- 6"
- DN
- 150
- Class
- Class 150
- Port
- —
- Face to face (mm)
- —
- L (RF) (mm)
- 356
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 356
- D (mm)
- 152
- d (mm)
- —
- H (mm)
- —
- L (mm)
- —
- Weight (flanged) (kg)
- —
- Weight (BW) (kg)
- —
- Weight (kg)
- 67
- Indus part no.IH-PV-CCK-AL-150-0800
- Type
- Axial, long pattern
- Size
- 8"
- DN
- 200
- Class
- Class 150
- Port
- —
- Face to face (mm)
- —
- L (RF) (mm)
- 495
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 495
- D (mm)
- 203
- d (mm)
- —
- H (mm)
- —
- L (mm)
- —
- Weight (flanged) (kg)
- —
- Weight (BW) (kg)
- —
- Weight (kg)
- 118
- Indus part no.IH-PV-CCK-AL-150-1000
- Type
- Axial, long pattern
- Size
- 10"
- DN
- 250
- Class
- Class 150
- Port
- —
- Face to face (mm)
- —
- L (RF) (mm)
- 622
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 622
- D (mm)
- 254
- d (mm)
- —
- H (mm)
- —
- L (mm)
- —
- Weight (flanged) (kg)
- —
- Weight (BW) (kg)
- —
- Weight (kg)
- 184
- Indus part no.IH-PV-CCK-AL-150-1200
- Type
- Axial, long pattern
- Size
- 12"
- DN
- 300
- Class
- Class 150
- Port
- —
- Face to face (mm)
- —
- L (RF) (mm)
- 699
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 699
- D (mm)
- 305
- d (mm)
- —
- H (mm)
- —
- L (mm)
- —
- Weight (flanged) (kg)
- —
- Weight (BW) (kg)
- —
- Weight (kg)
- 265
- Indus part no.IH-PV-CCK-AL-150-1400
- Type
- Axial, long pattern
- Size
- 14"
- DN
- 350
- Class
- Class 150
- Port
- —
- Face to face (mm)
- —
- L (RF) (mm)
- 787
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 787
- D (mm)
- 337
- d (mm)
- —
- H (mm)
- —
- L (mm)
- —
- Weight (flanged) (kg)
- —
- Weight (BW) (kg)
- —
- Weight (kg)
- 357
Show all 520 sizesShow fewer sizes
Type — Valve type of this row, where one listing covers several. Size — Nominal pipe size (NPS), as published. DN — Nominal diameter (DN), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. Port — Full bore or reduced bore, as published. Face to face — Face-to-face length of a wafer or lug body, which sits between the pipe flanges, as published. L (RF) — Face-to-face length with raised-face flanged ends, as published. L (RTJ) — Face-to-face length with ring-type-joint flanged ends, as published. L (BW) — End-to-end length with butt-weld ends, as published. D — Dimension D on the manufacturer dimension drawing. d — Dimension d on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight (flanged) — Weight with flanged ends, as published. Weight (BW) — Weight with butt-weld ends, as published. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
Lengths are in millimetres and weights in kilograms, as published for each size and class. The end connection, trim, seat and operator you order can change the length and weight, so we confirm the general arrangement drawing with the quotation.
What is the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow and where is it used?▾
How do I read a part number of the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow, such as IH-PV-CCK-AL-150-0200?▾
What sizes and dimensions does the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow come in?▾
What pressure class and temperature range does the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow cover?▾
What is the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow made of, and how is it built?▾
Which standards and tests apply to the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow?▾
Which end connections and operators does the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow have?▾
Which check valve suits an LNG pump discharge on the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow?▾
What service is the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow used for?▾
How does the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow differ from the Liquid Hydrogen Lift Check Valve, Vacuum Jacketed?▾
Can the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow be supplied against a project specification or vendor list?▾
Is the Cryogenic Check Valves: Swing, Lift, Dual Plate and Axial Flow in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








