Compact Mooring Swivel — Grades R4 and R5

Compact Mooring Swivel, in 5 sizes. Indus part numbers.
Key features
- Product type: Compact Mooring Swivel
- Size range: 51 mm to 102 mm
Product description
Compact forged mooring swivel in Grades R4 and R5 that fits a Kenter shackle at each end.
Sizes
5 sizes, from 51 mm to 102 mm. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Proof and breaking loads are as published for each size. They are test values, not working loads.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain diameter and grade the fitting joins, and the certificate you need.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Compact Mooring Swivel |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 51 mm to 102 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 2,952–11,932 kN |
Compliance
| Parameter | Value |
|---|---|
| Certification | Classification-society certificate (ABS, BV, DNV, LR and others) on request |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-MR-AC-CSW-0510
- Size
- 51 mm
- Chain size
- 51–64 mm
- Proof load, grade R4 (kN)
- 2,327
- Proof load, grade R5 (kN)
- 2,704
- Min breaking load, grade R4 (kN)
- 2,952
- Min breaking load, grade R5 (kN)
- 3,447
- A (mm)
- 450
- B (mm)
- 51
- C (mm)
- 80
- D (mm)
- 220
- Weight (kg)
- 100
- Indus part no.IH-MR-AC-CSW-0640
- Size
- 64 mm
- Chain size
- 64–76 mm
- Proof load, grade R4 (kN)
- 3,440
- Proof load, grade R5 (kN)
- 3,997
- Min breaking load, grade R4 (kN)
- 4,364
- Min breaking load, grade R5 (kN)
- 5,096
- A (mm)
- 540
- B (mm)
- 64
- C (mm)
- 100
- D (mm)
- 275
- Weight (kg)
- 187
- Indus part no.IH-MR-AC-CSW-0760
- Size
- 76 mm
- Chain size
- 76–89 mm
- Proof load, grade R4 (kN)
- 4,731
- Proof load, grade R5 (kN)
- 5,498
- Min breaking load, grade R4 (kN)
- 6,001
- Min breaking load, grade R5 (kN)
- 7,009
- A (mm)
- 605
- B (mm)
- 76
- C (mm)
- 120
- D (mm)
- 325
- Weight (kg)
- 284
- Indus part no.IH-MR-AC-CSW-0890
- Size
- 89 mm
- Chain size
- 89–102 mm
- Proof load, grade R4 (kN)
- 6,310
- Proof load, grade R5 (kN)
- 7,332
- Min breaking load, grade R4 (kN)
- 8,004
- Min breaking load, grade R5 (kN)
- 9,348
- A (mm)
- 670
- B (mm)
- 89
- C (mm)
- 140
- D (mm)
- 380
- Weight (kg)
- 427
- Indus part no.IH-MR-AC-CSW-1020
- Size
- 102 mm
- Chain size
- 102–114 mm
- Proof load, grade R4 (kN)
- 8,054
- Proof load, grade R5 (kN)
- 9,359
- Min breaking load, grade R4 (kN)
- 10,217
- Min breaking load, grade R5 (kN)
- 11,932
- A (mm)
- 755
- B (mm)
- 102
- C (mm)
- 160
- D (mm)
- 435
- Weight (kg)
- 627
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. Proof load, grade R4 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Proof load, grade R5 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load, grade R4 — Minimum breaking load. A test figure — never lift to it. Min breaking load, grade R5 — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is Compact Mooring Swivel, Grades R4 and R5 used for?▾
How do I read an Indus part number for Compact Mooring Swivel, Grades R4 and R5, such as IH-MR-AC-CSW-0510?▾
What sizes does Compact Mooring Swivel, Grades R4 and R5 come in?▾
How do I choose the right size of Compact Mooring Swivel, Grades R4 and R5?▾
What load rating does Compact Mooring Swivel, Grades R4 and R5 have?▾
What material and finish is Compact Mooring Swivel, Grades R4 and R5 supplied in?▾
What standard and certificate apply to Compact Mooring Swivel, Grades R4 and R5?▾
What does Compact Mooring Swivel, Grades R4 and R5 connect to or work with?▾
How should Compact Mooring Swivel, Grades R4 and R5 be inspected and looked after?▾
How does Compact Mooring Swivel, Grades R4 and R5 differ from Box Mooring Swivel — Grade R4?▾
How are Compact Mooring Swivel, Grades R4 and R5 shipped, and can they be exported from Dubai?▾
Do you keep Compact Mooring Swivel, Grades R4 and R5 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read








