Skip to content
BIJUR DELIMONIH-BD-OSS

Bijur Delimon Oil Streak Sensing Units (OSS)

Air-Oil & Oil Mist LubricationEx-stock · delivery in 3 days
Bijur Delimon Oil Streak Sensing Unit OSS-B42 — Air-oil system
VIEW 01·Bijur Delimon Oil Streak Sensing Unit OSS-B42 — Air-oil system
1 / 3

Bijur Delimon Oil Streak Sensing Units (OSS): 28 part numbers, for Air-oil systems; oil. The oil streak sensing unit watches the oil streak inside air-oil lines and signals when it stops, so a spindle is never run dry without warning. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.

Key features

  • Product type: Air-oil / oil mist lubrication
  • Series: Bijur Delimon Oil Streak Sensing Units
  • Drive: Compressed air with metered oil
  • Lubrication system: Air-oil
  • Lubricant: Oil
Product type
Air-oil / oil mist lubrication
Drive
Compressed air with metered oil
Lubrication system
Air-oil
Lubricant
Oil
DATA
Bijur Delimon Oil Streak Sensing Unit datasheet (35719)
datasheet · EN
↓ Download
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The oil streak sensing unit watches the oil streak inside air-oil lines and signals when it stops, so a spindle is never run dry without warning.

Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.

How it works

Units monitor two, three or four lines (one primary plus secondaries) on 4 mm or 6 mm tube, run on 10–30 VDC, are rated IP54 and CE-marked, and connect to a SureFire II lubricator over M12 extension cords. Mounting brackets, enclosures and a 6-to-4 mm conversion kit are listed.

Range

28 listed part numbers — systems Air-oil; lubricants Oil. The size table gives each part number's data.

Where it is used

  • air-oil spindle lubrication
  • machines where a lost oil feed means a bearing failure

Choosing an air-oil system

Air-oil suits high-speed bearings and spindles that need a small, continuous oil feed with cooling air — far less oil than an oil bath or oil mist, and no mist in the workshop. Start from the number of points, the oil grade and the shot each point needs (0.01 to 0.30 cc per cycle), then the air supply: it must be clean and dry, so plan a filter-regulator. Add an oil streak sensor where a lost feed would mean a bearing failure.

Complete systems

These components are one part of a lubrication system. We supply the Bijur Delimon lubricators, distribution, tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.

Documents

Bijur Delimon's datasheets and manuals for this range are in the Downloads tab.

Identification

ParameterValue
Product typeAir-oil / oil mist lubrication
SeriesBijur Delimon Oil Streak Sensing Units
DriveCompressed air with metered oil

Application

ParameterValue
Lubrication systemAir-oil
LubricantOil
Viscosity / NLGI range10-1500 cSt

Electrical

ParameterValue
IP ratingIP54

Connections

ParameterValue
Outlet thread4MM TUBE, 6MM TUBE
Connectionsoil in 4MM TUBE, oil in 6MM TUBE

Environment

ParameterValue
Operating temperature0°C-50°C
ApprovalsCE

Ordering

ParameterValue
SupplyGenuine Bijur Delimon, direct from the manufacturer (authorised distributor)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at