Bijur Delimon FluidFlex Spray Units

Bijur Delimon FluidFlex Spray Units: 23 part numbers, for Air-oil systems; coolant/oil; 1 gal reservoirs. FluidFlex is an air-actuated, low-pressure dispensing system for fluids, lubricants and coolants — from water-based coolant to viscous oils — wherever a machine needs a controlled flow of fluid while it runs. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Air-oil / oil mist lubrication
- Series: Bijur Delimon FluidFlex Spray Units
- Drive: Compressed air with metered oil
- Lubrication system: Air-oil
- Lubricant: Coolant/oil
- Reservoir: 1 gal
- Max pressure: 130 psi (9 bar) to 150 psi (10 bar)
- Product type
- Air-oil / oil mist lubrication
- Drive
- Compressed air with metered oil
- Lubrication system
- Air-oil
- Lubricant
- Coolant/oil
Product description
FluidFlex is an air-actuated, low-pressure dispensing system for fluids, lubricants and coolants — from water-based coolant to viscous oils — wherever a machine needs a controlled flow of fluid while it runs.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
Units have a 1-gallon aluminium reservoir and a solenoid air valve in 120 VAC, 240 VAC or 24 VDC, with or without a level switch; kits come with jets and a magnetic holder. Gauges, tubing, filler and drain plugs and gaskets are listed.
Range
23 listed part numbers — systems Air-oil; lubricants Coolant/oil; reservoirs 1 gal; maximum pressure 130 psi (9 bar) to 150 psi (10 bar). The size table gives each part number's data.
Row descriptions are Bijur Delimon's own: LS / LLS level or low-level switch, HLS high-level switch, PG pressure gauge, PS pressure switch, CNTL controller, P&M pump and motor, SLR single-line resistance, PDI positive-displacement injector, PROG progressive. The columns give each part number's published data.
Where it is used
- coolant and cutting-fluid application
- saw blades, dies and forming tools
- chain and conveyor lubrication
Choosing an air-oil system
Air-oil suits high-speed bearings and spindles that need a small, continuous oil feed with cooling air — far less oil than an oil bath or oil mist, and no mist in the workshop. Start from the number of points, the oil grade and the shot each point needs (0.01 to 0.30 cc per cycle), then the air supply: it must be clean and dry, so plan a filter-regulator. Add an oil streak sensor where a lost feed would mean a bearing failure.
Complete systems
These components are one part of a lubrication system. We supply the Bijur Delimon lubricators, distribution, tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.
Documents
Bijur Delimon's datasheets for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Air-oil / oil mist lubrication |
| Series | Bijur Delimon FluidFlex Spray Units |
| Drive | Compressed air with metered oil |
Application
| Parameter | Value |
|---|---|
| Lubrication system | Air-oil |
| Lubricant | Coolant/oil |
| Viscosity / NLGI range | WATER BASED COOLANT UP TO OIL |
Performance
| Parameter | Value |
|---|---|
| Reservoir | 1 gal |
| Max pressure | 130 psi (9 bar) to 150 psi (10 bar) |
Electrical
| Parameter | Value |
|---|---|
| Monitoring | pressure gauge, low-level switch, NORMALLY OPEN |
Connections
| Parameter | Value |
|---|---|
| Outlet thread | 1/8NPT |
| Connections | air in 1/4NPT, oil in 1/8NPT |
| Fill connection | CAP |
Construction
| Parameter | Value |
|---|---|
| Material | Aluminum, Brass, Nylon, Steel |
Ordering
| Parameter | Value |
|---|---|
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Shipping & lead time
Sizes & part numbers
23 sizes- Indus part no.IH-BD-D153
- Description
- D153 — UBA FLUIDFLEX 1GAL 120VAC
- Ports
- air in 1/4NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Reservoir
- 1GAL
- Supply
- 120VAC
- Max pressure
- —
- Outlet
- 1/8NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-D154
- Description
- D154 — UBB FLUIDFLEX 1GAL 240VAC
- Ports
- air in 1/4NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Reservoir
- 1GAL
- Supply
- 240VAC
- Max pressure
- —
- Outlet
- 1/8NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-D166
- Description
- D166 — UBA FLUIDFLEX 1GAL 120VAC LS
- Ports
- air in 1/4NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Reservoir
- 1GAL
- Supply
- 120VAC
- Max pressure
- —
- Outlet
- 1/8NPT
- Monitoring
- low-level switch, pressure gauge
- Indus part no.IH-BD-D166-2
- Description
- D166-2 — UB FLUIDFLEX 1GAL 24VDC LS
- Ports
- air in 1/4NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Reservoir
- 1GAL
- Supply
- 24VDC
- Max pressure
- —
- Outlet
- 1/8NPT
- Monitoring
- low-level switch, pressure gauge
- Indus part no.IH-BD-D167
- Description
- D167 — UB FLUIDFLEX 1GAL 24VDC
- Ports
- air in 1/4NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Reservoir
- 1GAL
- Supply
- 24VDC
- Max pressure
- —
- Outlet
- 1/8NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-K1052
- Description
- K1052 — KIT UBA FLUIDFLEX 1GAL 120VAC B156-6 B101 B133
- Ports
- air in 1/4NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Reservoir
- 1GAL
- Supply
- 120VAC
- Max pressure
- —
- Outlet
- 1/8NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-K1072
- Description
- K1072 — KIT UBA FLUIDFLEX 1GAL 120VAC B156-10 B101 B133
- Ports
- air in 1/4NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Reservoir
- 1GAL
- Supply
- 120VAC
- Max pressure
- —
- Outlet
- 1/8NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-B9960
- Description
- B9960 — SOLENOID VALVE 24VDC N.C.
- Ports
- oil in 1/8NPT
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- 24VDC
- Max pressure
- 130 psi (9 bar)
- Outlet
- 1/8NPT
- Monitoring
- —
Show all 23 sizesShow fewer sizes
- Indus part no.IH-BD-C3245-1
- Description
- C3245-1 — SOLENOID VALVE 120VAC N.C.
- Ports
- oil in 1/8NPT
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- 120VAC, 1 ph, 50/60 Hz
- Max pressure
- 150 psi (10 bar)
- Outlet
- 1/8NPT
- Monitoring
- —
- Indus part no.IH-BD-C3245-2
- Description
- C3245-2 — SOLENOID VALVE 240VAC N.C.
- Ports
- oil in 1/8NPT
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- 240VAC, 1 ph, 50/60 Hz
- Max pressure
- 150 psi (10 bar)
- Outlet
- 1/8NPT
- Monitoring
- —
- Indus part no.IH-BD-B10114
- Description
- B10114 — PRESSURE GAUGE 100PSI CBM 1.85"Ø 1/8NPTF
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-B10126
- Description
- B10126 — TBG ASSY 1/4 NYLON 4.13"L
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-B6275
- Description
- B6275 — GASKET RESERVOIR HEAD FLUIDFLEX UB/UC
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-B6303
- Description
- B6303 — FILLER PLUG ASSEMBLY UB
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-B6937
- Description
- B6937 — FILLER PLUG ASSEMBLY UC
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-B7305
- Description
- B7305 — DRAIN PLUG RESERVOIR 3/8-24 STEEL
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-B9779
- Description
- B9779 — REGULATOR 1/8NPT
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-HE1092
- Description
- HE1092 — SWITCH LOW LEVEL N.O.
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- NORMALLY OPEN
- Indus part no.IH-BD-S181
- Description
- S181 — KIT SERV LIQUID FILTER UB/UC
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-S205
- Description
- S205 — KIT SERV AIR FILTER UB/UC
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-S208
- Description
- S208 — KIT LIQUID SIGHT GAUGE GROUP UB
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-S216
- Description
- S216 — KIT SERV AIR SIGHT GAUGE UB/UC
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-S217
- Description
- S217 — KIT LIQUID SIGHT GAUGE GROUP UC
- Ports
- —
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
Description — What this part number is, as the manufacturer lists it. Ports — Port type and size, as published. System — Lubrication system the pump feeds — SLR (single-line resistance), PDI (positive-displacement injector), progressive, Dualine or multi-line — as published. Lubricant — Oil or grease, with the viscosity or NLGI range the pump handles, as published. Reservoir — Reservoir capacity in the unit the maker publishes it. Supply — Motor or control voltage, phase and frequency, as published. Max pressure — Maximum pressure as the maker publishes it, in psi and bar. Outlet — Outlet port thread, as published. Monitoring — Level switch, pressure switch, gauge or controller the part number includes, as published.
What are Bijur Delimon FluidFlex Spray Units?▾
What does an Indus part number such as IH-BD-D153 mean for Bijur Delimon FluidFlex Spray Units?▾
Which part numbers and versions does Bijur Delimon FluidFlex Spray Units cover?▾
How do I choose the right FluidFlex Spray Units for my machine?▾
What pressure, output and reservoir ratings do Bijur Delimon FluidFlex Spray Units have?▾
What is a PDI lubrication system, and is Bijur Delimon FluidFlex Spray Units used in one?▾
Which lubricants and viscosities can Bijur Delimon FluidFlex Spray Units handle?▾
Which datasheets and approvals are available for Bijur Delimon FluidFlex Spray Units?▾
Can Bijur Delimon FluidFlex Spray Units be supplied as part of a complete lubrication system?▾
Do you supply spare parts and service kits for Bijur Delimon FluidFlex Spray Units?▾
How do Bijur Delimon FluidFlex Spray Units differ from Bijur Delimon FluidFlex Spray Jets and Accessories?▾
Do you keep Bijur Delimon FluidFlex Spray Units in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








