Bijur Delimon FluidFlex Spray Jets and Accessories

Bijur Delimon FluidFlex Spray Jets and Accessories: 56 part numbers, for Air-oil systems; coolant/oil. Spray jets, extension jets and distribution blocks for FluidFlex units. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Air-oil / oil mist lubrication
- Series: Bijur Delimon FluidFlex Spray Jets and Accessories
- Drive: Compressed air with metered oil
- Lubrication system: Air-oil
- Lubricant: Coolant/oil
- Product type
- Air-oil / oil mist lubrication
- Drive
- Compressed air with metered oil
- Lubrication system
- Air-oil
- Lubricant
- Coolant/oil
Product description
Spray jets, extension jets and distribution blocks for FluidFlex units.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
Rigid and flexible extension jets (10-7/16 in) with tips, side-fan spray jets, dual tee junction blocks from 3 to 10 ways, dual-line assemblies and a magnetic jet holder.
Range
56 listed part numbers — systems Air-oil; lubricants Coolant/oil. The size table gives each part number's data.
Where it is used
- adding points to a FluidFlex installation
- replacing worn jets and tips
Choosing an air-oil system
Air-oil suits high-speed bearings and spindles that need a small, continuous oil feed with cooling air — far less oil than an oil bath or oil mist, and no mist in the workshop. Start from the number of points, the oil grade and the shot each point needs (0.01 to 0.30 cc per cycle), then the air supply: it must be clean and dry, so plan a filter-regulator. Add an oil streak sensor where a lost feed would mean a bearing failure.
Documents
Bijur Delimon's brochures for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Air-oil / oil mist lubrication |
| Series | Bijur Delimon FluidFlex Spray Jets and Accessories |
| Drive | Compressed air with metered oil |
Application
| Parameter | Value |
|---|---|
| Lubrication system | Air-oil |
| Lubricant | Coolant/oil |
| Viscosity / NLGI range | WATER BASED COOLANT UP TO OIL |
Connections
| Parameter | Value |
|---|---|
| Connections | fluid in 5/16-24, air in 1/8NPT |
Construction
| Parameter | Value |
|---|---|
| Material | Alum zinc die cast, Aluminum alloy |
Ordering
| Parameter | Value |
|---|---|
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Shipping & lead time
Sizes & part numbers
56 sizes- Indus part no.IH-BD-B101
- Description
- B101 — FLEXIBLE EXTENSION JET ASSEMBLY 10-7/16IN W/B136 TIP
- Ports
- fluid in 5/16-24, air in 1/8NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Indus part no.IH-BD-B102
- Description
- B102 — RIGID EXTENSION JET ASSEMBLY 10-7/16IN W/B136 TIP
- Ports
- fluid in 5/16-24, air in 1/8NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Indus part no.IH-BD-B102-9
- Description
- B102-9 — RIGID EXTENSION JET ASSEMBLY 9IN W/B136 TIP
- Ports
- fluid in 5/16-24, air in 1/8NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Indus part no.IH-BD-B103
- Description
- B103 — STUB JET ASSEMBLY
- Ports
- fluid in 5/16-24, air in 1/8NPT
- System
- Air-oil
- Lubricant
- Coolant/oil WATER BASED COOLANT UP TO OIL
- Indus part no.IH-BD-B128
- Description
- B128 — JUNCTION DUAL TEE BLOCK 3-WAY FLUIDFLEX
- Ports
- fluid in 5/16-24, air in 1/8NPT
- System
- Air-oil
- Lubricant
- Coolant/oil
- Indus part no.IH-BD-B129
- Description
- B129 — JUNCTION DUAL TEE BLOCK 5-WAY FLUIDFLEX
- Ports
- fluid in 5/16-24, air in 1/8NPT
- System
- Air-oil
- Lubricant
- Coolant/oil
- Indus part no.IH-BD-B130
- Description
- B130 — JUNCTION DUAL TEE BLOCK 6-WAY FLUIDFLEX
- Ports
- fluid in 5/16-24, air in 1/8NPT
- System
- Air-oil
- Lubricant
- Coolant/oil
- Indus part no.IH-BD-B132
- Description
- B132 — JUNCTION DUAL TEE BLOCK 10-WAY FLUIDFLEX
- Ports
- fluid in 5/16-24, air in 1/8NPT
- System
- Air-oil
- Lubricant
- Coolant/oil
Show all 56 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. Ports — Port type and size, as published. System — Lubrication system the pump feeds — SLR (single-line resistance), PDI (positive-displacement injector), progressive, Dualine or multi-line — as published. Lubricant — Oil or grease, with the viscosity or NLGI range the pump handles, as published.
What are Bijur Delimon FluidFlex Spray Jets and Accessories?▾
What does an Indus part number such as IH-BD-B101 mean for Bijur Delimon FluidFlex Spray Jets and Accessories?▾
Which part numbers and versions does Bijur Delimon FluidFlex Spray Jets and Accessories cover?▾
How do I choose the right FluidFlex Spray Jets and Accessories for my machine?▾
Which lubricants and viscosities can Bijur Delimon FluidFlex Spray Jets and Accessories handle?▾
Which datasheets and approvals are available for Bijur Delimon FluidFlex Spray Jets and Accessories?▾
Can Bijur Delimon FluidFlex Spray Jets and Accessories be supplied as part of a complete lubrication system?▾
Do you supply spare parts and service kits for Bijur Delimon FluidFlex Spray Jets and Accessories?▾
Where are Bijur Delimon FluidFlex Spray Jets and Accessories typically used?▾
What do I need to give you to quote Bijur Delimon FluidFlex Spray Jets and Accessories?▾
How do Bijur Delimon FluidFlex Spray Jets and Accessories differ from Bijur Delimon FluidFlex Spray Units?▾
Do you keep Bijur Delimon FluidFlex Spray Jets and Accessories in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








