Skip to content
BIJUR DELIMONIH-BD-AOPNL

Bijur Delimon Air-Oil Panels, Splitters and System Parts

Air-Oil & Oil Mist LubricationEx-stock · delivery in 3 days
Bijur Delimon Solenoid Valve 20311-8 — 24VDC
VIEW 01·Bijur Delimon Solenoid Valve 20311-8 — 24VDC
1 / 3

Bijur Delimon Air-Oil Panels, Splitters and System Parts: 27 part numbers, 2 to 4 L reservoirs. Air-oil panels and components for building or servicing air-oil systems, plus service parts for the HyperFormance chain pin system and the Spin-Rev spray unit. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.

Key features

  • Product type: Air-oil / oil mist lubrication
  • Series: Bijur Delimon Air-Oil Panels, Splitters and System Parts
  • Drive: Compressed air with metered oil
  • Reservoir: 2 to 4 L
  • Max pressure: 150 psi (10 bar)
Product type
Air-oil / oil mist lubrication
Drive
Compressed air with metered oil
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Air-oil panels and components for building or servicing air-oil systems, plus service parts for the HyperFormance chain pin system and the Spin-Rev spray unit.

Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.

How it works

Listed: AirMatic and SureFire II air-oil panel assemblies, a 4-point 0.20 cc air-oil kit, panel coolers, a 40/40/20 flow splitter, reclassifier adapters, and HCPS low-level switches, solenoid valve, 2 L reservoir, gasket and fill strainer.

Note: The HyperFormance chain pin system is obsolete; its parts remain available as spares.

Range

27 listed part numbers — reservoirs 2 to 4 L; maximum pressure 150 psi (10 bar). The size table gives each part number's data.

Where it is used

  • air-oil system builds and retrofits
  • servicing HCPS and Spin-Rev installations

Choosing an air-oil system

Air-oil suits high-speed bearings and spindles that need a small, continuous oil feed with cooling air — far less oil than an oil bath or oil mist, and no mist in the workshop. Start from the number of points, the oil grade and the shot each point needs (0.01 to 0.30 cc per cycle), then the air supply: it must be clean and dry, so plan a filter-regulator. Add an oil streak sensor where a lost feed would mean a bearing failure.

Identification

ParameterValue
Product typeAir-oil / oil mist lubrication
SeriesBijur Delimon Air-Oil Panels, Splitters and System Parts
DriveCompressed air with metered oil

Performance

ParameterValue
Reservoir2 to 4 L
Max pressure150 psi (10 bar)

Electrical

ParameterValue
IP ratingNEMA 1
Monitoringlow-level switch N.O., low-level switch (N/C)

Connections

ParameterValue
Outlet thread1/4NPT
Connectionsoil in 1/4NPT

Construction

ParameterValue
MaterialDie cast aluminum, Brass

Environment

ParameterValue
Operating temperature-18°C-60°C

Ordering

ParameterValue
SupplyGenuine Bijur Delimon, direct from the manufacturer (authorised distributor)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at