Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks

Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks: 20 part numbers, for PDI systems; oil. AV, AVE and AVH blocks mix a measured shot of oil into a controlled air stream for air-oil lubrication of high-speed spindles and bearings, with one to eight positive-displacement injectors (PDI) per block. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Air-oil / oil mist lubrication
- Series: Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks
- Drive: Compressed air with metered oil
- Lubrication system: PDI
- Lubricant: Oil
- Output: 0.01 to 0.4 cc
- Outlets: 1 Outlet; 2 Outlets; 3 Outlets; 4 Outlets
- Product type
- Air-oil / oil mist lubrication
- Drive
- Compressed air with metered oil
- Lubrication system
- PDI
- Lubricant
- Oil
Product description
AV, AVE and AVH blocks mix a measured shot of oil into a controlled air stream for air-oil lubrication of high-speed spindles and bearings, with one to eight positive-displacement injectors (PDI) per block.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
Each outlet has its own air needle valve. On every pressure-and-relief cycle of the lubricator each injector fires its shot into the air line, and the air carries the oil along the tube wall to the bearing as one continuous streak. Injectors come in seven outputs; for ceramic and steel high-speed bearings the 0.01 and 0.025 cc/cycle sizes are the usual choice. The blocks are built to order code; replacement ZCN injectors and plugs are listed by part number.
Range
20 listed part numbers plus versions configured to order from 42,070 order codes (AV…, AVE…, AVH…) — systems PDI; lubricants Oil; output 0.01 to 0.4 cc. The size table gives each part number's data.
Row descriptions are Bijur Delimon's own: LS / LLS level or low-level switch, HLS high-level switch, PG pressure gauge, PS pressure switch, CNTL controller, P&M pump and motor, SLR single-line resistance, PDI positive-displacement injector, PROG progressive. The columns give each part number's published data.
Where it is used
- high-speed machine-tool spindles
- rolling-mill and wire-mill bearings
- small-pitch chains, cam followers and linear bearings
Choosing an air-oil system
Air-oil suits high-speed bearings and spindles that need a small, continuous oil feed with cooling air — far less oil than an oil bath or oil mist, and no mist in the workshop. Start from the number of points, the oil grade and the shot each point needs (0.01 to 0.30 cc per cycle), then the air supply: it must be clean and dry, so plan a filter-regulator. Add an oil streak sensor where a lost feed would mean a bearing failure.
Complete systems
These components are one part of a lubrication system. We supply the Bijur Delimon lubricators, distribution, tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.
Order code — AV Air-Oil Injector Block - 1 to 4-Outlet
The order code is AV followed by one code from each position below, in order. Bijur Delimon lists 2,800 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Number of Outlets | 1 | 1 Outlet |
| 2 | 2 Outlets | ||
| 3 | 3 Outlets | ||
| 4 | 4 Outlets | ||
| 2 | Delivery Volume | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 3 | Delivery Volume 2 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 4 | Delivery Volume 3 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 5 | Delivery Volume 4 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc |
Examples of valid codes: AV1G, AV1A, AV1B.
Order code — AV Air-Oil Injector Block - 6 to 8-Outlet
The order code is AV followed by one code from each position below, in order. Bijur Delimon lists 14 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Number of Outlets | 6 | 6 Outlets |
| 8 | 8 Outlets | ||
| 2 | Delivery Volume | GGGGGG | 6 X 0.01cc |
| AAAAAA | 6 X 0.025cc | ||
| BBBBBB | 6 X 0.06cc | ||
| CCCCCC | 6 X 0.10cc | ||
| DDDDDD | 6 X 0.20cc | ||
| EEEEEE | 6 X 0.30cc | ||
| FFFFFF | 6 X 0.40cc | ||
| GGGGGGGG | 8 X 0.01cc | ||
| AAAAAAAA | 8 X 0.025cc | ||
| BBBBBBBB | 8 X 0.06cc | ||
| CCCCCCCC | 8 X 0.10cc | ||
| DDDDDDDD | 8 X 0.20cc | ||
| EEEEEEEE | 8 X 0.30cc | ||
| FFFFFFFF | 8 X 0.40cc |
Examples of valid codes: AV6GGGGGG, AV6AAAAAA, AV6BBBBBB.
Order code — AVE Air-Oil Injector Block - 1 to 5-Outlet
The order code is AVE followed by one code from each position below, in order. Bijur Delimon lists 19,607 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Number of Outlets | 1 | 1 Outlet |
| 2 | 2 Outlets | ||
| 3 | 3 Outlets | ||
| 4 | 4 Outlets | ||
| 5 | 5 Outlets | ||
| 2 | Delivery Volume | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 3 | Delivery Volume 2 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 4 | Delivery Volume 3 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 5 | Delivery Volume 4 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 6 | Delivery Volume 5 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc |
Examples of valid codes: AVE1G, AVE1A, AVE1B.
Order code — AVE Air-Oil Injector Block - 6 to 8-Outlet
The order code is AVE followed by one code from each position below, in order. Bijur Delimon lists 21 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | AVE Outlets | 6 | 6 Outlets |
| 7 | 7 Outlets | ||
| 8 | 8 Outlets | ||
| 2 | Delivery Volume | GGGGGG | 6 X 0.01cc |
| AAAAAA | 6 X 0.025cc | ||
| BBBBBB | 6 X 0.06cc | ||
| CCCCCC | 6 X 0.10cc | ||
| DDDDDD | 6 X 0.20cc | ||
| EEEEEE | 6 X 0.30cc | ||
| FFFFFF | 6 X 0.40cc | ||
| GGGGGGG | 7 X 0.01cc | ||
| AAAAAAA | 7 X 0.025cc | ||
| BBBBBBB | 7 X 0.06cc | ||
| CCCCCCC | 7 X 0.10cc | ||
| DDDDDDD | 7 X 0.20cc | ||
| EEEEEEE | 7 X 0.30cc | ||
| FFFFFFF | 7 X 0.40cc | ||
| GGGGGGGG | 8 X 0.01cc | ||
| AAAAAAAA | 8 X 0.025cc | ||
| BBBBBBBB | 8 X 0.06cc | ||
| CCCCCCCC | 8 X 0.10cc | ||
| DDDDDDDD | 8 X 0.20cc | ||
| EEEEEEEE | 8 X 0.30cc | ||
| FFFFFFFF | 8 X 0.40cc |
Examples of valid codes: AVE6GGGGGG, AVE6AAAAAA, AVE6BBBBBB.
Order code — AVH Air-Oil Injector Block - 1 to 5-Outlet
The order code is AVH followed by one code from each position below, in order. Bijur Delimon lists 19,607 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Number of Outlets | 1 | 1 Outlet |
| 2 | 2 Outlets | ||
| 3 | 3 Outlets | ||
| 4 | 4 Outlets | ||
| 5 | 5 Outlets | ||
| 2 | Delivery Volume | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 3 | Delivery Volume 2 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 4 | Delivery Volume 3 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 5 | Delivery Volume 4 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc | ||
| 6 | Delivery Volume 5 - optional | G | 0.01cc |
| A | 0.025cc | ||
| B | 0.06cc | ||
| C | 0.10cc | ||
| D | 0.20cc | ||
| E | 0.30cc | ||
| F | 0.40cc |
Examples of valid codes: AVH1G, AVH1A, AVH1B.
Order code — AVH Air-Oil Injector Block - 6 to 8-Outlet
The order code is AVH followed by one code from each position below, in order. Bijur Delimon lists 21 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Number of Outlets | 6 | 6 Outlets |
| 7 | 7 Outlets | ||
| 8 | 8 Outlets | ||
| 2 | Delivery Volume | GGGGGG | 6 X 0.01cc |
| AAAAAA | 6 X 0.025cc | ||
| BBBBBB | 6 X 0.06cc | ||
| CCCCCC | 6 X 0.10cc | ||
| DDDDDD | 6 X 0.20cc | ||
| EEEEEE | 6 X 0.30cc | ||
| FFFFFF | 6 X 0.40cc | ||
| GGGGGGG | 7 X 0.01cc | ||
| AAAAAAA | 7 X 0.025cc | ||
| BBBBBBB | 7 X 0.06cc | ||
| CCCCCCC | 7 X 0.10cc | ||
| DDDDDDD | 7 X 0.20cc | ||
| EEEEEEE | 7 X 0.30cc | ||
| FFFFFFF | 7 X 0.40cc | ||
| GGGGGGGG | 8 X 0.01cc | ||
| AAAAAAAA | 8 X 0.025cc | ||
| BBBBBBBB | 8 X 0.06cc | ||
| CCCCCCCC | 8 X 0.10cc | ||
| DDDDDDDD | 8 X 0.20cc | ||
| EEEEEEEE | 8 X 0.30cc | ||
| FFFFFFFF | 8 X 0.40cc |
Examples of valid codes: AVH6GGGGGG, AVH6AAAAAA, AVH6BBBBBB.
Documents
Bijur Delimon's datasheets and service sheets for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Air-oil / oil mist lubrication |
| Series | Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks |
| Drive | Compressed air with metered oil |
Application
| Parameter | Value |
|---|---|
| Lubrication system | PDI |
| Lubricant | Oil |
| Viscosity / NLGI range | ISO VG32-VG100/142SSU-465SSU |
Performance
| Parameter | Value |
|---|---|
| Output | 0.01 to 0.4 cc |
| Outlets | 1 Outlet; 2 Outlets; 3 Outlets; 4 Outlets |
Ordering
| Parameter | Value |
|---|---|
| Order code | AV… (2,800 codes), AV… (14 codes), AVE… (19,607 codes), AVE… (21 codes), AVH… (19,607 codes), AVH… (21 codes) |
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Shipping & lead time
Sizes & part numbers
20 sizes- Indus part no.IH-BD-24209-025
- Description
- 24209-025 — PDI INJECTOR ZCN 0.025CC
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.025cc
- Indus part no.IH-BD-24209-03
- Description
- 24209-03 — PDI INJECTOR ZCN 0.03CC
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.03cc
- Indus part no.IH-BD-24209-06
- Description
- 24209-06 — PDI INJECTOR ZCN 0.06CC
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.06cc
- Indus part no.IH-BD-24209-10
- Description
- 24209-10 — PDI INJECTOR ZCN 0.10CC
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.10cc
- Indus part no.IH-BD-24209-20
- Description
- 24209-20 — PDI INJECTOR ZCN 0.20CC
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.20cc
- Indus part no.IH-BD-24209-30
- Description
- 24209-30 — PDI INJECTOR ZCN 0.30CC
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.30cc
- Indus part no.IH-BD-24209-40
- Description
- 24209-40 — PDI INJECTOR ZCN 0.40CC
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.40cc
- Indus part no.IH-BD-26903-01
- Description
- 26903-01 — PDI INJECTOR ZCH 0.01CC
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.01cc
Show all 20 sizesShow fewer sizes
- Indus part no.IH-BD-24209-025H
- Description
- 24209-025H — PDI INJECTOR ZCN 0.025CC +/-5%
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.025cc
- Indus part no.IH-BD-24209-03H
- Description
- 24209-03H — PDI INJECTOR ZCN 0.03CC +/-5%
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.03cc
- Indus part no.IH-BD-24209-06H
- Description
- 24209-06H — PDI INJECTOR ZCN 0.06CC +/-5%
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.06cc
- Indus part no.IH-BD-24209-10H
- Description
- 24209-10H — PDI INJECTOR ZCN 0.10CC +/-5%
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.10cc
- Indus part no.IH-BD-24209-20H
- Description
- 24209-20H — PDI INJECTOR ZCN 0.20CC +/-5%
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.20cc
- Indus part no.IH-BD-24209-30H
- Description
- 24209-30H — PDI INJECTOR ZCN 0.30CC +/-5%
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.30cc
- Indus part no.IH-BD-24209-40H
- Description
- 24209-40H — PDI INJECTOR ZCN 0.40CC +/-5%
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.40cc
- Indus part no.IH-BD-26903-01H
- Description
- 26903-01H — PDI INJECTOR ZCH 0.01CC +/-5%
- System
- PDI
- Lubricant
- Oil ISO VG32-VG100/142SSU-465SSU
- Output
- 0.01cc
- Indus part no.IH-BD-32971
- Description
- 32971 — AIR/OIL 2X.025 W/O NEEDLE VLVS
- System
- —
- Lubricant
- —
- Output
- —
- Indus part no.IH-BD-26699-1
- Description
- 26699-1 — AIR/OIL 2 WAY VALVE ASSY .025
- System
- —
- Lubricant
- —
- Output
- —
- Indus part no.IH-BD-32132
- Description
- 32132 — PLUG KIT AVE/32945/AV/AVH
- System
- PDI
- Lubricant
- —
- Output
- —
- Indus part no.IH-BD-23676
- Description
- 23676 — KIT INJECTOR PLUG
- System
- —
- Lubricant
- —
- Output
- —
Description — What this part number is, as the manufacturer lists it. System — Lubrication system the pump feeds — SLR (single-line resistance), PDI (positive-displacement injector), progressive, Dualine or multi-line — as published. Lubricant — Oil or grease, with the viscosity or NLGI range the pump handles, as published. Output — Lubricant output per cycle or per minute, as published.
What are Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks?▾
How do I read the order code for Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks?▾
Which part numbers and versions does Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks cover?▾
How do I choose the right AV, AVE and AVH Air-Oil Injector Blocks for my machine?▾
What pressure, output and reservoir ratings do Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks have?▾
What is a PDI lubrication system, and is Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks used in one?▾
Which lubricants and viscosities can Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks handle?▾
Which datasheets and approvals are available for Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks?▾
Can Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks be supplied as part of a complete lubrication system?▾
Do you supply spare parts and service kits for Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks?▾
How do Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks differ from Bijur Delimon AirMax Air-Oil Lubricators?▾
Is the Bijur Delimon AV, AVE and AVH Air-Oil Injector Blocks available from Indus Hydraulics in Dubai, and what is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








