Skip to content
BIJUR DELIMONIH-BD-MPA

Bijur Delimon MPA Micro Pumps (Air-Oil)

Air-Oil & Oil Mist LubricationEx-stock · delivery in 3 days
Bijur Delimon MPA Micro Pump 5107811E — 70cc reservoir, Air-oil system
VIEW 01·Bijur Delimon MPA Micro Pump 5107811E — 70cc reservoir, Air-oil system
1 / 3

Bijur Delimon MPA Micro Pumps (Air-Oil): 9 part numbers, for Air-oil systems; oil; 70cc, 320cc, 400cc, 1L reservoirs. MPA micro pumps are air-actuated pumps that deliver up to 0.03 cc of oil per stroke per outlet into an air-oil line. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.

Key features

  • Product type: Air-oil / oil mist lubrication
  • Series: Bijur Delimon MPA Micro Pumps
  • Drive: Compressed air with metered oil
  • Lubrication system: Air-oil
  • Lubricant: Oil
  • Reservoir: 70cc, 320cc, 400cc, 1L
  • Output: 0-0.03cc, 0-0.03cc/outlet
  • Max pressure: 44 psi (3 bar)
Product type
Air-oil / oil mist lubrication
Drive
Compressed air with metered oil
Lubrication system
Air-oil
Lubricant
Oil
DATA
Bijur Delimon MPA Micro Pump datasheet (35697)
datasheet · EN
↓ Download
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

MPA micro pumps are air-actuated pumps that deliver up to 0.03 cc of oil per stroke per outlet into an air-oil line.

Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.

How it works

Versions with one outlet, or three outlets actuated together or individually, come with 70, 320 or 400 cc reservoirs (also listed on their own). Rated for oils of 10 to 1,100 cSt; M8x1 outlets.

Range

9 listed part numbers — systems Air-oil; lubricants Oil; reservoirs 70cc, 320cc, 400cc, 1L; output 0-0.03cc, 0-0.03cc/outlet; maximum pressure 44 psi (3 bar). The size table gives each part number's data.

Where it is used

  • small spindles and precision bearings
  • chain and pin lubrication with minimal oil

Choosing an air-oil system

Air-oil suits high-speed bearings and spindles that need a small, continuous oil feed with cooling air — far less oil than an oil bath or oil mist, and no mist in the workshop. Start from the number of points, the oil grade and the shot each point needs (0.01 to 0.30 cc per cycle), then the air supply: it must be clean and dry, so plan a filter-regulator. Add an oil streak sensor where a lost feed would mean a bearing failure.

Complete systems

These components are one part of a lubrication system. We supply the Bijur Delimon lubricators, distribution, tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.

Documents

Bijur Delimon's datasheets for this range are in the Downloads tab.

Identification

ParameterValue
Product typeAir-oil / oil mist lubrication
SeriesBijur Delimon MPA Micro Pumps
DriveCompressed air with metered oil

Application

ParameterValue
Lubrication systemAir-oil
LubricantOil
Viscosity / NLGI range10-1100 cSt

Performance

ParameterValue
Reservoir70cc, 320cc, 400cc, 1L
Output0-0.03cc, 0-0.03cc/outlet
Max pressure44 psi (3 bar)

Connections

ParameterValue
Outlet threadM8X1, 1/8BSPT
Connectionsoil in 1/8BSPP, air in 1/8BSPP

Environment

ParameterValue
Operating temperature0°C-80°C

Ordering

ParameterValue
SupplyGenuine Bijur Delimon, direct from the manufacturer (authorised distributor)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at