- 01How does a vacuum ejector work?
- Compressed air is blown through a nozzle into a venturi; the fast-moving jet draws air out of a side port connected to the pad, creating vacuum. An ejector has no moving parts, is small enough to mount at the pad, and makes vacuum only while it is fed with air.
- 02Should I use a vacuum ejector or a vacuum pump?
- An ejector suits intermittent pick-and-place: it is compact, responds quickly, sits close to the pad and uses air only while it runs. A vacuum pump suits continuous duty, many pads on one system or long holding times, where an ejector's compressed air use would cost more. Many machines use ejectors for exactly that reason: they need nothing but the air supply already there.
- 03How do I calculate the holding force of a vacuum pad?
- Force equals pressure difference times pad area. A 50 mm pad has an area of about 1,963 mm²; at 60 kPa below atmosphere (0.06 N/mm²) that is about 118 N in theory. Makers then apply a safety factor, which is larger when the pad holds the part sideways in shear than when it lifts it straight up, and larger again for fast movement. Use the maker's pad-force tables for the final selection.
- 04How do I pick up porous material such as cardboard?
- Porous parts leak air through the surface, so the vacuum source must handle that leakage as well as evacuate the pad. Use a larger pad area at lower vacuum, a soft pad that seals on the surface, and an ejector or pump sized for the leakage flow. Test with the actual material before settling on a design.
- 05Why fit a vacuum switch?
- A vacuum pressure switch confirms that vacuum has reached a set level, meaning the part is gripped, before the machine moves, and signals if the part is lost. Without one, the machine cannot tell a good pick from a missed one.
- 06What does a vacuum water separator do?
- It catches liquid and dirt drawn in through the pad before they reach the ejector, valve or switch, which they would otherwise block or damage. Fit one where pads handle wet, oily or dusty parts. This shelf carries SMC vacuum water separators.