Welded Pool Anchor

Welded Pool Anchor, in 63 sizes, 60 kg to 17,260 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Welded Pool Anchor
- Size range: 60 kg to 17,260 kg
- Size range
- 60 kg to 17,260 kg
Product description
Marine anchors for vessels, buoys and moorings.
Sizes and ratings
63 sizes, 60 kg to 17,260 kg. Every size has its own Indus part number in the table below.
Choosing a size
Specify the anchor by type and weight, and state any classification society certificate the vessel needs.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Welded Pool Anchor |
| Sizes | 63 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 60 kg to 17,260 kg |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
63 sizes- Indus part no.IH-LR-AN-POOLW-60KG
- Size
- 60 kg
- A (mm)
- 586
- C (mm)
- 356
- C1 (mm)
- 205
- H (mm)
- 200
- L (mm)
- 534
- Indus part no.IH-LR-AN-POOLW-75KG
- Size
- 75 kg
- A (mm)
- 631
- C (mm)
- 384
- C1 (mm)
- 221
- H (mm)
- 216
- L (mm)
- 576
- Indus part no.IH-LR-AN-POOLW-90KG
- Size
- 90 kg
- A (mm)
- 671
- C (mm)
- 405
- C1 (mm)
- 234
- H (mm)
- 229
- L (mm)
- 612
- Indus part no.IH-LR-AN-POOLW-105KG
- Size
- 105 kg
- A (mm)
- 706
- C (mm)
- 430
- C1 (mm)
- 247
- H (mm)
- 242
- L (mm)
- 644
- Indus part no.IH-LR-AN-POOLW-125KG
- Size
- 125 kg
- A (mm)
- 748
- C (mm)
- 455
- C1 (mm)
- 261
- H (mm)
- 256
- L (mm)
- 682
- Indus part no.IH-LR-AN-POOLW-136KG
- Size
- 136 kg
- A (mm)
- 769
- C (mm)
- 467
- C1 (mm)
- 268
- H (mm)
- 263
- L (mm)
- 700
- Indus part no.IH-LR-AN-POOLW-160KG
- Size
- 160 kg
- A (mm)
- 812
- C (mm)
- 494
- C1 (mm)
- 284
- H (mm)
- 278
- L (mm)
- 741
- Indus part no.IH-LR-AN-POOLW-180KG
- Size
- 180 kg
- A (mm)
- 845
- C (mm)
- 514
- C1 (mm)
- 295
- H (mm)
- 289
- L (mm)
- 776
Show all 63 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. C1 — Dimension C1 on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the welded Pool anchor and what sizes does it come in?▾
How do I read the Indus part number on the welded Pool anchor?▾
Which sizes does the welded Pool anchor come in?▾
How do I choose the mass of the welded Pool anchor?▾
What holding power or proof load does the welded Pool anchor have?▾
What is the welded Pool anchor made from?▾
Which standard or certificate applies to the welded Pool anchor?▾
What anchor chain and shackles go with the welded Pool anchor?▾
What should I check before supplying a welded Pool anchor?▾
Where is the welded Pool anchor used?▾
Welded Pool anchor compared with the Pool anchor Type N?▾
Do you stock the welded Pool anchor, and how do I request a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Types of marine anchors: stockless, Hall, Pool, HHP, Admiralty, fluke, claw and offshore drag anchors
Ship anchors, small-craft anchors and offshore mooring anchors are different families with different jobs. The anchor types we list, how each one holds, the mass ranges available and what to specify when ordering one.
7 min read
Anchor chain & mooring
Equipment number: how a ship’s anchors and anchor chain are sized
Classification rules size a ship’s anchors and chain from a single figure, the equipment number. What it represents, how to read the equipment table to find anchor mass, total chain length and chain diameter in each grade, and why a high-holding-power anchor and a higher chain grade change the answer.
5 min read
Anchor chain & mooring
Anchor proof load testing: test loads by anchor mass, and why HHP anchors are tested harder
Every ship’s anchor is proof loaded before it is certified, to a load set by its mass. The proof test load for anchors from 50 kg to 48 tonnes, how high-holding-power anchors are treated, what the test proves, and what to check on the certificate.
4 min read







