High-Holding-Power Fluke Anchor

High-Holding-Power Fluke Anchor, in 46 sizes. Indus part numbers.
Key features
- Product type: High-Holding-Power Fluke Anchor
- Size range: 48 kg to 10,575 kg
Product description
High-holding-power fluke anchor with a pivoting shank.
Sizes
46 sizes, from 48 kg to 10,575 kg. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the anchor type and mass, and whether a classification-society certificate is required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | High-Holding-Power Fluke Anchor |
| Sizes | 46 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 48 kg to 10,575 kg |
Shipping & lead time
Sizes & part numbers
46 sizes- Indus part no.IH-MR-AN-HHPF-48KG
- Size
- 48 kg
- A (mm)
- 500
- B (mm)
- 530
- C (mm)
- 200
- D (mm)
- 465
- E (mm)
- 310
- Indus part no.IH-MR-AN-HHPF-135KG
- Size
- 135 kg
- A (mm)
- 700
- B (mm)
- 745
- C (mm)
- 280
- D (mm)
- 660
- E (mm)
- 435
- Indus part no.IH-MR-AN-HHPF-180KG
- Size
- 180 kg
- A (mm)
- 770
- B (mm)
- 820
- C (mm)
- 305
- D (mm)
- 725
- E (mm)
- 480
- Indus part no.IH-MR-AN-HHPF-225KG
- Size
- 225 kg
- A (mm)
- 830
- B (mm)
- 880
- C (mm)
- 330
- D (mm)
- 780
- E (mm)
- 515
- Indus part no.IH-MR-AN-HHPF-315KG
- Size
- 315 kg
- A (mm)
- 930
- B (mm)
- 990
- C (mm)
- 370
- D (mm)
- 870
- E (mm)
- 575
- Indus part no.IH-MR-AN-HHPF-360KG
- Size
- 360 kg
- A (mm)
- 970
- B (mm)
- 1,030
- C (mm)
- 385
- D (mm)
- 910
- E (mm)
- 600
- Indus part no.IH-MR-AN-HHPF-430KG
- Size
- 430 kg
- A (mm)
- 1,030
- B (mm)
- 1,100
- C (mm)
- 410
- D (mm)
- 970
- E (mm)
- 640
- Indus part no.IH-MR-AN-HHPF-495KG
- Size
- 495 kg
- A (mm)
- 1,080
- B (mm)
- 1,150
- C (mm)
- 430
- D (mm)
- 1,015
- E (mm)
- 670
Show all 46 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the high-holding-power fluke anchor and what sizes does it come in?▾
How do I read the Indus part number on the high-holding-power fluke anchor?▾
Which sizes does the high-holding-power fluke anchor come in?▾
How do I choose the mass of the high-holding-power fluke anchor?▾
What holding power or proof load does the high-holding-power fluke anchor have?▾
What is the high-holding-power fluke anchor made from?▾
Which standard or certificate applies to the high-holding-power fluke anchor?▾
What anchor chain and shackles go with the high-holding-power fluke anchor?▾
What should I check before supplying a high-holding-power fluke anchor?▾
Where is the high-holding-power fluke anchor used?▾
High-holding-power fluke anchor compared with the lightweight fluke anchor?▾
Do you stock the high-holding-power fluke anchor, and how do I request a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Types of marine anchors: stockless, Hall, Pool, HHP, Admiralty, fluke, claw and offshore drag anchors
Ship anchors, small-craft anchors and offshore mooring anchors are different families with different jobs. The anchor types we list, how each one holds, the mass ranges available and what to specify when ordering one.
7 min read
Anchor chain & mooring
Equipment number: how a ship’s anchors and anchor chain are sized
Classification rules size a ship’s anchors and chain from a single figure, the equipment number. What it represents, how to read the equipment table to find anchor mass, total chain length and chain diameter in each grade, and why a high-holding-power anchor and a higher chain grade change the answer.
5 min read
Anchor chain & mooring
Anchor proof load testing: test loads by anchor mass, and why HHP anchors are tested harder
Every ship’s anchor is proof loaded before it is certified, to a load set by its mass. The proof test load for anchors from 50 kg to 48 tonnes, how high-holding-power anchors are treated, what the test proves, and what to check on the certificate.
4 min read








