Stainless Steel Lightweight Fluke Anchor with Crown Stock

Stainless Steel Lightweight Fluke Anchor with Crown Stock, in 4 sizes, 3 kg to 10 kg. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Lightweight Fluke Anchor with Crown Stock
- Size range: 3 kg to 10 kg
- Size range
- 3 kg to 10 kg
- Material
- Stainless steel
- Finish
- Polished
Product description
Marine anchors for vessels, buoys and moorings. Stainless steel, polished.
Sizes
4 sizes, 3 kg to 10 kg. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Laser, stamping, welding.
Choosing a size
Specify the anchor by type and weight, and state any classification society certificate the vessel needs.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Lightweight Fluke Anchor with Crown Stock |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3 kg to 10 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-LR-AN-SSDACSA-3KG
- Size
- 3 kg
- A (mm)
- 585
- B (mm)
- 400
- C (mm)
- 270
- Weight (kg)
- 3
- Indus part no.IH-LR-AN-SSDACSA-5KG
- Size
- 5 kg
- A (mm)
- 590
- B (mm)
- 450
- C (mm)
- 285
- Weight (kg)
- 5
- Indus part no.IH-LR-AN-SSDACSA-7KG
- Size
- 7 kg
- A (mm)
- 660
- B (mm)
- 450
- C (mm)
- 315
- Weight (kg)
- 7
- Indus part no.IH-LR-AN-SSDACSA-10KG
- Size
- 10 kg
- A (mm)
- 705
- B (mm)
- 500
- C (mm)
- 430
- Weight (kg)
- 10
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the stainless steel lightweight fluke anchor with crown stock and what sizes does it come in?▾
How do I read the Indus part number on the stainless steel lightweight fluke anchor with crown stock?▾
Which sizes does the stainless steel lightweight fluke anchor with crown stock come in?▾
How do I choose the mass of the stainless steel lightweight fluke anchor with crown stock?▾
What holding power or proof load does the stainless steel lightweight fluke anchor with crown stock have?▾
What is the stainless steel lightweight fluke anchor with crown stock made from?▾
Which standard or certificate applies to the stainless steel lightweight fluke anchor with crown stock?▾
What anchor chain and shackles go with the stainless steel lightweight fluke anchor with crown stock?▾
What should I check before supplying a stainless steel lightweight fluke anchor with crown stock?▾
Where is the stainless steel lightweight fluke anchor with crown stock used?▾
Stainless steel lightweight fluke anchor compared with the galvanized lightweight fluke anchor?▾
Do you stock the stainless steel lightweight fluke anchor with crown stock, and how do I request a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Types of marine anchors: stockless, Hall, Pool, HHP, Admiralty, fluke, claw and offshore drag anchors
Ship anchors, small-craft anchors and offshore mooring anchors are different families with different jobs. The anchor types we list, how each one holds, the mass ranges available and what to specify when ordering one.
7 min read
Anchor chain & mooring
Equipment number: how a ship’s anchors and anchor chain are sized
Classification rules size a ship’s anchors and chain from a single figure, the equipment number. What it represents, how to read the equipment table to find anchor mass, total chain length and chain diameter in each grade, and why a high-holding-power anchor and a higher chain grade change the answer.
5 min read
Anchor chain & mooring
Anchor proof load testing: test loads by anchor mass, and why HHP anchors are tested harder
Every ship’s anchor is proof loaded before it is certified, to a load set by its mass. The proof test load for anchors from 50 kg to 48 tonnes, how high-holding-power anchors are treated, what the test proves, and what to check on the certificate.
4 min read







