Weld-On D Ring with Mounting Clip
Weld-On D Ring with Mounting Clip, in 4 sizes, 1/2″ to 1″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Weld-On D Ring with Mounting Clip
- Size range: 1/2″ to 1″
- Size range
- 1/2″ to 1″
- Material
- Forged steel
- Finish
- Zinc plated, hot-dip galvanized,self coloured
Product description
Lifting points, pad eyes and weld-on rings give a fixed or swivelling point to rig a load from. Forged steel, zinc plated, hot-dip galvanized,self coloured.
Sizes and ratings
4 sizes, 1/2″ to 1″. Minimum breaking load 12,000 to 47,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged.
Choosing a size
Rate the point for the load and the direction of pull. A swivel point follows the sling; a fixed eye loses capacity when pulled off its axis. Bolted points need the stated thread engagement and torque; weld-on points need a qualified weld to sound structure.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Weld-On D Ring with Mounting Clip |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/2″ to 1″ |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 12,000 to 47,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Forged steel |
| Finish | Zinc plated, hot-dip galvanized,self coloured |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Size | Min breaking load (lbs) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-LP-WDMC-050 | 1/2″ | 12,000 | 57.15 | 63.5 | 12.7 | 44.7 | 15.49 | 0.94 |
| IH-LR-LP-WDMC-062 | 5/8″ | 18,000 | 76.2 | 76.2 | 16 | 62.99 | 23.37 | 1.87 |
| IH-LR-LP-WDMC-075 | 3/4″ | 26,500 | 76.2 | 76.2 | 19.05 | 62.99 | 25.4 | 2.7 |
| IH-LR-LP-WDMC-100 | 1″ | 47,000 | 76.2 | 76.2 | 25.4 | 64.01 | 30.73 | 4.21 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the weld-on d ring with mounting clip come in?▾
Can I lift at an angle from an eye bolt?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle Anschweißstutzen
- fr
- collier de serrage raccord à souder
- es
- abrazadera de manguera racor para soldar
- it
- fascetta stringitubo raccordo a saldare
Engineers viewing this also looked at
Grade 80 Eye Bolt — DIN 580
Grade 80 Forged D Ring
Grade 80 Lifting Eye Nut — DIN 582
Grade 80 Lifting Eye Screw with Omega Link
Grade 80 Swivel Lifting Screw Point
Grade 80 Weld-On Pivoting D Link
Black Coated Strap Staple
