Grade 80 Lifting Eye Nut — DIN 582
Grade 80 Lifting Eye Nut (DIN 582), in 11 sizes, M6 to M48. Load rating on request. Indus part numbers.
Key features
- Product type: Grade 80 Lifting Eye Nut
- Pattern / standard: DIN 582
- Size range: M6 to M48
- Size range
- M6 to M48
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Lifting points, pad eyes and weld-on rings give a fixed or swivelling point to rig a load from. Made to DIN 582. Alloy steel, powder coated.
Sizes
11 sizes, M6 to M48. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged / quenched & tempered.
Choosing a size
Rate the point for the load and the direction of pull. Bolted points need the stated thread engagement and torque; weld-on points need a qualified weld to sound structure.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Lifting Eye Nut |
| Pattern / standard | DIN 582 |
| Sizes | 11 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M6 to M48 |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Shipping & lead time
Sizes & part numbers
11 sizes| Indus part no. | Size | WLL 4:1, at 0° (t) | WLL 4:1, at 90° (t) | D (mm) | L (mm) | Ø (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| IH-LR-LP-80LEND582-M6 | M6 | 0.4 | 0.15 | 36 | 36 | 20 | 0.049 |
| IH-LR-LP-80LEND582-M8 | M8 | 1 | 0.4 | 36 | 36 | 20 | 0.05 |
| IH-LR-LP-80LEND582-M10 | M10 | 1 | 0.4 | 45 | 45 | 25 | 0.09 |
| IH-LR-LP-80LEND582-M12 | M12 | 2 | 0.75 | 54 | 53 | 30 | 0.16 |
| IH-LR-LP-80LEND582-M16 | M16 | 4 | 1.5 | 63 | 62 | 35 | 0.24 |
| IH-LR-LP-80LEND582-M20 | M20 | 6 | 2.3 | 63 | 62 | 35 | 0.36 |
| IH-LR-LP-80LEND582-M24 | M24 | 8 | 3.2 | 72 | 71 | 40 | 0.72 |
| IH-LR-LP-80LEND582-M30 | M30 | 12 | 4.5 | 72 | 71 | 40 | 1.32 |
| IH-LR-LP-80LEND582-M36 | M36 | 16 | 7 | 81 | 81 | 45 | 2.08 |
| IH-LR-LP-80LEND582-M42 | M42 | 24 | 9 | 90 | 90 | 50 | 3.11 |
| IH-LR-LP-80LEND582-M48 | M48 | 32 | 12 | 90 | 90 | 50 | 5.02 |
Size — Nominal size as the manufacturer states it. WLL 4:1, at 0° — Working load limit at a 4:1 design factor, as published. WLL 4:1, at 90° — Working load limit at a 4:1 design factor, as published. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ø — Dimension Ø on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 80 lifting eye nut come in?▾
Can I lift at an angle from an eye bolt?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Grade 80 Lifting Eye Screw with Omega Link
Grade 80 Swivel Lifting Screw Point
Grade 80 Weld-On Pivoting D Link
Black Coated Strap Staple
Grade 80 Bolt-On Lifting Point
Grade 80 Double Swivel Shackle
Galvanized Ring on Plate
