V-Notch Segmental Ball Control Valve

Concentric V-notch segmental ball control valves: NPS 3/4" to 20", Class 150 to 600, shearing V-ball for slurries and fibres, metal or soft seat, rotary actuator.
Key features
- Valve type: Control valve, V-notch segmental ball
- Construction: Segmented V-notch ball, rotary
- Design standard: IEC 60534, ASME B16.34
- Size range: NPS 3/4" to 20" (DN20 to DN500)
- Pressure class: ASME Class 150 to 600
- Body material: Carbon steel, stainless steel, alloy steel, duplex stainless steel
- End connections: RF or RTJ flanged; butt-weld
- Operation: Pneumatic diaphragm or piston actuator, or electric actuator, with positioner
- Operation
- Pneumatic diaphragm or piston actuator, or electric actuator, with positioner
- End connections
- RF or RTJ flanged; butt-weld
- Valve type
- Control valve, V-notch segmental ball
- Design standard
- IEC 60534, ASME B16.34
- Pressure class
- ASME Class 150 to 600
Product description
A quarter-turn control valve whose segmented ball has a V-shaped notch. As it rotates, the notch shears against the seat, cutting through fibres and slurry, and the V gives an equal-percentage characteristic with high capacity and wide rangeability.
A control valve throttles flow continuously on a signal from the control system, to hold a flow, pressure, level or temperature at set point. It is sized by flow coefficient (Cv) to the duty, and supplied with its actuator, positioner and accessories assembled and calibrated.
Construction
- Segmented ball with V-notch: shearing action
- Metal or soft seat
- High capacity, wide rangeability
- Rotary pneumatic actuator, positioner, solenoid and accessories
Sizes and ratings
Published range: NPS 3/4" to 20" (DN20 to DN500), ASME Class 150 to 600, in carbon steel, stainless steel, alloy steel, duplex stainless steel. End connections: RF or RTJ flanged; butt-weld. Operation: pneumatic diaphragm or piston actuator, or electric actuator, with positioner.
Dimensions depend on the size, rating and options chosen; the general arrangement drawing comes with the quotation.
Testing and documents
Shell and seat-leakage tests to IEC 60534-4 / ANSI FCI 70-2, with stroke and calibration checks, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
V-notch ball control valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other control valves in the range, for comparison when the duty is not settled yet: Angle Control Valve, Erosion Resistant, Bellows-Seal Single-Seated Control Valve, Bellows-Seal Cage-Guided Control Valve, Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation.
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, stainless steel, alloy steel, duplex stainless steel |
Construction
| Parameter | Value |
|---|---|
| Operation | Pneumatic diaphragm or piston actuator, or electric actuator, with positioner |
| End connections | RF or RTJ flanged; butt-weld |
Standards
| Parameter | Value |
|---|---|
| Pressure testing | Shell and seat-leakage tests to IEC 60534-4 / ANSI FCI 70-2, with stroke and calibration checks |
| Design standard | IEC 60534, ASME B16.34 |
Identification
| Parameter | Value |
|---|---|
| Valve type | Control valve, V-notch segmental ball |
| Construction | Segmented V-notch ball, rotary |
Range
| Parameter | Value |
|---|---|
| Size range | NPS 3/4" to 20" (DN20 to DN500) |
| Pressure class | ASME Class 150 to 600 |
Application
| Parameter | Value |
|---|---|
| Typical service | Slurries, pulp, fibrous and viscous fluids |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the V-Notch Segmental Ball Control Valve and where is it used?▾
What do the NPS and Class ratings of the V-Notch Segmental Ball Control Valve mean?▾
What sizes does the V-Notch Segmental Ball Control Valve come in?▾
What pressure class and temperature range does the V-Notch Segmental Ball Control Valve cover?▾
What is the V-Notch Segmental Ball Control Valve made of, and how is it built?▾
Which standards and tests apply to the V-Notch Segmental Ball Control Valve?▾
Which end connections and operators does the V-Notch Segmental Ball Control Valve have?▾
Where does a V-ball beat a globe valve on the V-Notch Segmental Ball Control Valve?▾
What service is the V-Notch Segmental Ball Control Valve used for?▾
How does the V-Notch Segmental Ball Control Valve differ from the Angle Control Valve, Erosion Resistant?▾
Can the V-Notch Segmental Ball Control Valve be supplied against a project specification or vendor list?▾
Is the V-Notch Segmental Ball Control Valve in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






