Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation

Multi-stage sleeve pressure-reducing control valves: NPS 1-1/2" to 12", Class 150 to 2500, drop pressure in stages to prevent cavitation, balanced plug.
Key features
- Valve type: Control valve, multi-stage, anti-cavitation
- Construction: Multi-stage sleeves, balanced plug
- Design standard: IEC 60534, ASME B16.34
- Size range: NPS 1-1/2" to 12" (DN40 to DN300)
- Pressure class: ASME Class 150 to 2500
- Body material: Carbon steel, stainless steel, alloy steel, duplex stainless steel
- End connections: RF or RTJ flanged; butt-weld
- Operation: Pneumatic diaphragm or piston actuator, or electric actuator, with positioner
- Operation
- Pneumatic diaphragm or piston actuator, or electric actuator, with positioner
- End connections
- RF or RTJ flanged; butt-weld
- Valve type
- Control valve, multi-stage, anti-cavitation
- Design standard
- IEC 60534, ASME B16.34
- Pressure class
- ASME Class 150 to 2500
Product description
When a liquid is throttled across a large pressure drop in one step, it cavitates: vapour bubbles form and collapse, eroding the trim and body. Multi-stage sleeves take the drop in several smaller steps so the pressure never falls below vapour pressure, and the valve stays quiet and intact.
A control valve throttles flow continuously on a signal from the control system, to hold a flow, pressure, level or temperature at set point. It is sized by flow coefficient (Cv) to the duty, and supplied with its actuator, positioner and accessories assembled and calibrated.
Construction
- Multi-stage pressure-reducing sleeves
- Balanced plug for stable control
- S-pattern high-capacity body
- Pneumatic or electric actuator with positioner
Sizes and ratings
Published range: NPS 1-1/2" to 12" (DN40 to DN300), ASME Class 150 to 2500, in carbon steel, stainless steel, alloy steel, duplex stainless steel. End connections: RF or RTJ flanged; butt-weld. Operation: pneumatic diaphragm or piston actuator, or electric actuator, with positioner.
Dimensions depend on the size, rating and options chosen; the general arrangement drawing comes with the quotation.
Testing and documents
Shell and seat-leakage tests to IEC 60534-4 / ANSI FCI 70-2, with stroke and calibration checks, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Multi-stage control valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other control valves in the range, for comparison when the duty is not settled yet: Single-Seated Globe Control Valve, Top Guided, Cage-Guided Control Valve, Pressure-Balanced Trim, V-Notch Segmental Ball Control Valve, Angle Control Valve, Erosion Resistant.
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, stainless steel, alloy steel, duplex stainless steel |
Construction
| Parameter | Value |
|---|---|
| Operation | Pneumatic diaphragm or piston actuator, or electric actuator, with positioner |
| End connections | RF or RTJ flanged; butt-weld |
Standards
| Parameter | Value |
|---|---|
| Pressure testing | Shell and seat-leakage tests to IEC 60534-4 / ANSI FCI 70-2, with stroke and calibration checks |
| Design standard | IEC 60534, ASME B16.34 |
Identification
| Parameter | Value |
|---|---|
| Valve type | Control valve, multi-stage, anti-cavitation |
| Construction | Multi-stage sleeves, balanced plug |
Range
| Parameter | Value |
|---|---|
| Size range | NPS 1-1/2" to 12" (DN40 to DN300) |
| Pressure class | ASME Class 150 to 2500 |
Application
| Parameter | Value |
|---|---|
| Typical service | High pressure drop liquid service; boiler feed recirculation |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation and where is it used?▾
What do the NPS and Class ratings of the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation mean?▾
What sizes does the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation come in?▾
What pressure class and temperature range does the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation cover?▾
What is the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation made of, and how is it built?▾
Which standards and tests apply to the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation?▾
Which end connections and operators does the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation have?▾
How do I know if my duty will cavitate on the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation?▾
What service is the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation used for?▾
How does the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation differ from the Cage-Guided Control Valve, Pressure-Balanced Trim?▾
Can the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation be supplied against a project specification or vendor list?▾
Is the Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Reduzierung
- fr
- réducteur
- es
- reductor
- it
- riduzione
From the blog






