Cage-Guided Control Valve, Pressure-Balanced Trim

Cage-guided control valves with pressure-balanced plug: NPS 1-1/2" to 30", Class 150 to 2500, high capacity, low noise, stable at high pressure drop.
Key features
- Valve type: Control valve, cage guided, balanced
- Construction: Cage-guided balanced plug, S-pattern body
- Design standard: IEC 60534, ASME B16.34
- Size range: NPS 1-1/2" to 30" (DN40 to DN750)
- Pressure class: ASME Class 150 to 2500
- Body material: Carbon steel, stainless steel, alloy steel, duplex stainless steel
- End connections: RF or RTJ flanged; butt-weld
- Operation: Pneumatic diaphragm or piston actuator, or electric actuator, with positioner
- Operation
- Pneumatic diaphragm or piston actuator, or electric actuator, with positioner
- End connections
- RF or RTJ flanged; butt-weld
- Valve type
- Control valve, cage guided, balanced
- Design standard
- IEC 60534, ASME B16.34
- Pressure class
- ASME Class 150 to 2500
Product description
For larger valves and higher pressure drops. The plug is guided along its whole stroke by a cage and balanced so that most of the static pressure force on it cancels, which keeps the actuator small and the control stable; low-noise and anti-cavitation cages are available.
A control valve throttles flow continuously on a signal from the control system, to hold a flow, pressure, level or temperature at set point. It is sized by flow coefficient (Cv) to the duty, and supplied with its actuator, positioner and accessories assembled and calibrated.
Construction
- Cage-guided, pressure-balanced plug
- Interchangeable cages: linear, equal-percentage, low-noise
- S-pattern body, high flow capacity
- Pneumatic diaphragm actuator as standard
Sizes and ratings
Published range: NPS 1-1/2" to 30" (DN40 to DN750), ASME Class 150 to 2500, in carbon steel, stainless steel, alloy steel, duplex stainless steel. End connections: RF or RTJ flanged; butt-weld. Operation: pneumatic diaphragm or piston actuator, or electric actuator, with positioner.
Dimensions depend on the size, rating and options chosen; the general arrangement drawing comes with the quotation.
Testing and documents
Shell and seat-leakage tests to IEC 60534-4 / ANSI FCI 70-2, with stroke and calibration checks, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Cage-guided control valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other control valves in the range, for comparison when the duty is not settled yet: V-Notch Segmental Ball Control Valve, Angle Control Valve, Erosion Resistant, Bellows-Seal Single-Seated Control Valve, Bellows-Seal Cage-Guided Control Valve.
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, stainless steel, alloy steel, duplex stainless steel |
Construction
| Parameter | Value |
|---|---|
| Operation | Pneumatic diaphragm or piston actuator, or electric actuator, with positioner |
| End connections | RF or RTJ flanged; butt-weld |
Standards
| Parameter | Value |
|---|---|
| Pressure testing | Shell and seat-leakage tests to IEC 60534-4 / ANSI FCI 70-2, with stroke and calibration checks |
| Design standard | IEC 60534, ASME B16.34 |
Identification
| Parameter | Value |
|---|---|
| Valve type | Control valve, cage guided, balanced |
| Construction | Cage-guided balanced plug, S-pattern body |
Range
| Parameter | Value |
|---|---|
| Size range | NPS 1-1/2" to 30" (DN40 to DN750) |
| Pressure class | ASME Class 150 to 2500 |
Application
| Parameter | Value |
|---|---|
| Typical service | High pressure drop, large-capacity control |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the Cage-Guided Control Valve, Pressure-Balanced Trim and where is it used?▾
What do the NPS and Class ratings of the Cage-Guided Control Valve, Pressure-Balanced Trim mean?▾
What sizes does the Cage-Guided Control Valve, Pressure-Balanced Trim come in?▾
What pressure class and temperature range does the Cage-Guided Control Valve, Pressure-Balanced Trim cover?▾
What is the Cage-Guided Control Valve, Pressure-Balanced Trim made of, and how is it built?▾
Which standards and tests apply to the Cage-Guided Control Valve, Pressure-Balanced Trim?▾
Which end connections and operators does the Cage-Guided Control Valve, Pressure-Balanced Trim have?▾
Why a balanced plug on the Cage-Guided Control Valve, Pressure-Balanced Trim?▾
What service is the Cage-Guided Control Valve, Pressure-Balanced Trim used for?▾
How does the Cage-Guided Control Valve, Pressure-Balanced Trim differ from the Bellows-Seal Cage-Guided Control Valve?▾
Can the Cage-Guided Control Valve, Pressure-Balanced Trim be supplied against a project specification or vendor list?▾
Is the Cage-Guided Control Valve, Pressure-Balanced Trim in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






