Skip to content
SUN HYDRAULICSIH-SUN-DO-R8

Sun Hydraulics Normally Open, Balanced Poppet, Logic Element with Integral T-8A Control Cavity, Vent-to-Close — DODR8, DOFR8, DOHR8, DOJR8, Series 1 to 4

Logic Element CartridgesEx-stock · delivery in 3 days
Sun Hydraulics DODR8 normally open balanced poppet logic element, series 1, T-21A cavity — dimension drawing
VIEW 01·Sun Hydraulics DODR8 normally open balanced poppet logic element, series 1, T-21A cavity — dimension drawing
1 / 3

Sun Hydraulics Normally Open, Balanced Poppet, Logic Element with Integral T-8A Control Cavity, Vent-to-Close: DODR8, DOFR8, DOHR8, DOJR8, series 1 to 4, 15 gpm to 120 gpm (60 L/min to 480 L/min), T-21A, T-22A, T-23A, T-24A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Normally Open Balanced Poppet Logic Element
  • Capacity: 15 gpm to 120 gpm (60 L/min to 480 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-21A, T-22A, T-23A, T-24A
Valve function
Normally Open Balanced Poppet Logic Element
Series (frame sizes)
1 to 4
Cavity
T-21A, T-22A, T-23A, T-24A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A normally open 2-way logic element with a balanced poppet: pressure at ports 1 and 2 does not push it shut, so it switches predictably on its control signal alone, with 5,000 psi (350 bar) at both work ports.

This version

  • Normally open.
  • A T-8A pilot cavity is machined into the end, so a pilot cartridge screws straight in (ordered separately).

Sizes and cavities

Sun Hydraulics builds this valve in 4 versions:

  • DODR8 — series 1, T-21A cavity, 15 gpm (60 L/min)
  • DOFR8 — series 2, T-22A cavity, 30 gpm (120 L/min)
  • DOHR8 — series 3, T-23A cavity, 60 gpm (240 L/min)
  • DOJR8 — series 4, T-24A cavity, 120 gpm (480 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Minimum pilot pressure to shift: 400 psi (28 bar), 300 psi (20 bar)
  • Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)

Configuration options

The letters after the base model code choose these options (shown for DODR8; a size may add or drop a choice):

  • Setting range: H — 400 psi (28 bar)
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • Needs a minimum pilot pressure (about 400 psi, 30 bar, on series 1) with the external drain open.
  • Same cavity as an unbalanced logic element of the same frame size, so it can replace one.
  • X control vents to atmosphere (a fix for existing circuits that may weep over time); E control uses a static external drain, the better choice for new designs.

Where it is used

High-flow switching where the path must stay open with no signal — bypass, unloading and dump functions.

Installation and seal kits

Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, Polyurethane: 990022002, Viton: 990022006; series 3: Buna: 990023007, Polyurethane: 990023002, Viton: 990023006; series 4: Buna: 990024007, EPDM: 990024014, Polyurethane: 990024002, Viton: 990024006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DODR8HN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Performance

ParameterValue
Capacity15 gpm to 120 gpm (60 L/min to 480 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeH — 400 psi (28 bar)
Max leakage10 drops/min.@5000 psi (0,7 cc/min.@350 bar)

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, Polyurethane: 990022002, Viton: 990022006; series 3: Buna: 990023007, Polyurethane: 990023002, Viton: 990023006; series 4: Buna: 990024007, EPDM: 990024014, Polyurethane: 990024002, Viton: 990024006
Weight.35 lb (0,15 kg) to 3.50 lb (1,60 kg)

Identification

ParameterValue
Valve functionNormally Open Balanced Poppet Logic Element
Series (frame sizes)1 to 4
CavityT-21A, T-22A, T-23A, T-24A

Configuration

ParameterValue
Seal materialN — Buna-N, V — Viton

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at