Skip to content
SUN HYDRAULICSIH-SUN-LO-B8

Sun Hydraulics Vent-to-Open, Spring-Biased Closed, Unbalanced Poppet Logic Element with Pilot Source from Port 2 and Integral T-8A Control Cavity — LODB8, LOFB8, LOHB8, LOJB8, LOKB8

Logic Element CartridgesEx-stock · delivery in 3 days
Sun Hydraulics LODB8 vent-to-open unbalanced poppet logic element, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics LODB8 vent-to-open unbalanced poppet logic element, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics Vent-to-Open, Spring-Biased Closed, Unbalanced Poppet Logic Element with Pilot Source from Port 2 and Integral T-8A Control Cavity: LODB8, LOFB8, LOHB8, LOJB8, LOKB8, series 1 to 4, 25 gpm to 300 gpm (95 L/min to 1100 L/min), T-11A, T-2A, T-17A, T-19A, T-19AU cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Vent-to-Open Unbalanced Poppet Logic Element
  • Capacity: 25 gpm to 300 gpm (95 L/min to 1100 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A, T-2A, T-17A, T-19A, T-19AU
Valve function
Vent-to-Open Unbalanced Poppet Logic Element
Series (frame sizes)
1 to 4
Cavity
T-11A, T-2A, T-17A, T-19A, T-19AU
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A spring-closed, unbalanced poppet logic element that takes its pilot oil from its own work port through an internal orifice. With the control port blocked it stays shut in one direction and acts as a check in the other; vent the control port and it opens, provided there is pressure to overcome the spring.

This version

  • A T-8A pilot cavity is machined into the end, so a pilot cartridge screws straight in (ordered separately).
  • Pilot oil is taken from port 2.

Sizes and cavities

Sun Hydraulics builds this valve in 5 versions:

  • LODB8 — series 1, T-11A cavity, 25 gpm (95 L/min)
  • LOFB8 — series 2, T-2A cavity, 50 gpm (200 L/min)
  • LOHB8 — series 3, T-17A cavity, 100 gpm (380 L/min)
  • LOJB8 — series 4, T-19A cavity, 200 gpm (760 L/min)
  • LOKB8 — series 4, T-19AU cavity, 300 gpm (1100 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Pilot area ratios (pilot to port 1 / port 2): 1.8:1 / 2.25:1

Configuration options

The letters after the base model code choose these options (shown for LODB8; a size may add or drop a choice):

  • Setting range: D — 50 psi (3,5 bar)
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • It opens quickly when vented; closing time depends on flow and pressure drop and is hard to predict.
  • Pilot-source options: port 1, port 2, or either through an internal shuttle.
  • A positive seal separates port 2 from the pilot area.

Where it is used

High-flow on/off functions vented by a small 2-way pilot valve — no separate pilot supply needed.

Installation and seal kits

Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example LODB8DN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionVent-to-Open Unbalanced Poppet Logic Element
Series (frame sizes)1 to 4
CavityT-11A, T-2A, T-17A, T-19A, T-19AU

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006
Weight2.60 lb (1,20 kg)

Performance

ParameterValue
Capacity25 gpm to 300 gpm (95 L/min to 1100 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeD — 50 psi (3,5 bar)

Configuration

ParameterValue
Seal materialN — Buna-N, V — Viton

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at