Skip to content
SUN HYDRAULICSIH-SUN-FS-RS

Sun Hydraulics High Accuracy Synchronizing, Flow Divider-Combiner Valve — FSAS, FSBS, FSDR, FSER, FSFR, Series 1 to 4

Flow Control CartridgesEx-stock · delivery in 3 days
Sun Hydraulics FSBS synchronising flow divider/combiner valve, series 1, T-31A cavity — dimension drawing
VIEW 01·Sun Hydraulics FSBS synchronising flow divider/combiner valve, series 1, T-31A cavity — dimension drawing
1 / 3

Sun Hydraulics synchronising flow divider/combiner valve: FSAS, FSBS, FSDR, FSER, FSFR, series 1 to 4, .3 - 1.5 gpm to 6 - 30 gpm (1 - 6 L/min to 23 - 120 L/min), T-31A, T-32A, T-33A, T-34A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Synchronising Flow Divider/Combiner Valve
  • Capacity: .3 - 1.5 gpm to 6 - 30 gpm (1 - 6 L/min to 23 - 120 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-31A, T-32A, T-33A, T-34A
Valve function
Synchronising Flow Divider/Combiner Valve
Series (frame sizes)
1 to 4
Cavity
T-31A, T-32A, T-33A, T-34A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A divider/combiner with a synchronising feature: when the first of two cylinders reaches the end of its stroke, a reduced, compensated flow keeps feeding the other until it arrives too, so both finish together every stroke.

Sizes and cavities

Sun Hydraulics builds this valve in 5 sizes. The series sets the cavity it screws into and its flow capacity:

  • FSAS — series 1, T-31A cavity, .3 - 1.5 gpm (1 - 6 L/min)
  • FSBS — series 1, T-31A cavity, .6 - 3 gpm (2,5 - 12 L/min)
  • FSDR — series 2, T-32A cavity, 1.5 - 8 gpm (6 - 30 L/min)
  • FSER — series 3, T-33A cavity, 3 - 15 gpm (12 - 60 L/min)
  • FSFR — series 4, T-34A cavity, 6 - 30 gpm (23 - 120 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)

Configuration options

The letters after the base model code choose these options (shown for FSBS; a size may add or drop a choice):

  • Control: X — Not Adjustable
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X.

Selection notes

  • High-accuracy versions hold the split more closely.

Where it is used

Pairs of cylinders that must stay in step over many cycles — lift tables, gates and platforms.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, Polyurethane: 990034002, Viton: 990034006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FSBSXAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, Polyurethane: 990034002, Viton: 990034006
Weight.60 lb (0,30 kg) to 2.80 lb (1,30 kg)

Configuration

ParameterValue
Control / adjustmentX — Not Adjustable
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Identification

ParameterValue
Valve functionSynchronising Flow Divider/Combiner Valve
Series (frame sizes)1 to 4
CavityT-31A, T-32A, T-33A, T-34A

Performance

ParameterValue
Capacity.3 - 1.5 gpm to 6 - 30 gpm (1 - 6 L/min to 23 - 120 L/min)
Max operating pressure5000 psi (350 bar)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at