Skip to content
SUN HYDRAULICSIH-SUN-DF-FG

Sun Hydraulics FLeX Series 2-Way, 2-Stage, Solenoid-Operated Directional Poppet Valve with Reverse Flow Check, Flow 2-1 — DFBF, DFBG, Series 0

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DFBG 2-way 2-stage solenoid-operated poppet valve, series 0, T-162A cavity — dimension drawing
VIEW 01·Sun Hydraulics DFBG 2-way 2-stage solenoid-operated poppet valve, series 0, T-162A cavity — dimension drawing
1 / 3

Sun Hydraulics FLeX Series 2-Way, 2-Stage, Solenoid-Operated Directional Poppet Valve with Reverse Flow Check, Flow 2-1: DFBF, DFBG, series 0, 10 gpm (40 L/min), T-162A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 2-Way 2-Stage Solenoid-Operated Poppet Valve
  • Capacity: 10 gpm (40 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-162A
Valve function
2-Way 2-Stage Solenoid-Operated Poppet Valve
Series (frame sizes)
0
Cavity
T-162A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-operated, 2-position poppet valve: the solenoid opens a small pilot, and system pressure moves the main poppet, so a small coil switches a large flow. A reverse free-flow check lets oil pass the other way when it is closed. Poppet seating gives very low leakage — under 10 drops a minute at 5,000 psi.

This version

  • FLeX Series: tested to 10 million cycles at full rated pressure and zinc-nickel plated as standard for 1,000 hours of salt-fog protection.
  • When closed, a built-in check passes free flow in the reverse direction.
  • Controls flow from port 2 to port 1.

Sizes and cavities

Sun Hydraulics builds this valve in 2 versions:

  • DFBF — series 0, T-162A cavity, 10 gpm (40 L/min)
  • DFBG — series 0, T-162A cavity, 10 gpm (40 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar)
  • Typical response time: 50 ms
  • Switching frequency: 15,000 max. cycles/hr
  • Check cracking pressure: 50 psi (3,5 bar)

Configuration options

The letters after the base model code choose these options (shown for DFBG; a size may add or drop a choice):

  • Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, P — Manual Pull Override, T — Twist (Momentary) Manual Override, X — No Manual Override
  • Spool / poppet configuration: C — Normally Closed, H — Normally Open
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Coil: 58 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof

Option rules: If the coil is in this group (211, 212, 212D, 214, 214D, 223, 224, 224D, 228, 228D, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912, 912D, 914, 914D, 924, 924D, 928, 928D, JM24BD, JM24CD, JN24BD, JN24CD), the range must be C or H; If the coil is in this group (JM24BD, JM24CD, JN24BD, JN24CD), the control must be M, P or X; If the control is D, the range must be H; If the control is L, the range must be H; If the control is M, the range must be H; If the control is P, the range must be C; If the control is T, the range must be H; If the seal is E, the control must be M or X.

Selection notes

  • Normally open or normally closed, chosen in the code.
  • The solenoid tube is fatigue-rated for 5,000 psi (350 bar).

Where it is used

Load holding and high-flow on/off functions — lowering valves, accumulator isolation, unloading.

Installation and seal kits

Hex 3/4 in. (19,1 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series 0: Buna: 990162007, Viton: 990162006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DFBGXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve function2-Way 2-Stage Solenoid-Operated Poppet Valve
Series (frame sizes)0
CavityT-162A

Performance

ParameterValue
Capacity10 gpm (40 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar)

Configuration

ParameterValue
Control / adjustmentD — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, P — Manual Pull Override, T — Twist (Momentary) Manual Override, X — No Manual Override; C — Normally Closed, H — Normally Open
Seal materialN — Buna-N, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm)
Seal kitsseries 0: Buna: 990162007, Viton: 990162006
Weight5.6 oz. (159 grams)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at