Skip to content
SUN HYDRAULICSIH-SUN-DBAP

Sun Hydraulics 3-Way, Air-Operated, Spool Directional Valve, Pilot Capacity — DBAP

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics DBAP air-operated pilot directional valve, series P, T-9A cavity — dimension drawing
VIEW 01·Sun Hydraulics DBAP air-operated pilot directional valve, series P, T-9A cavity — dimension drawing
1 / 3

Sun Hydraulics 3-Way, Air-Operated, Spool Directional Valve, Pilot Capacity: DBAP, series P, .25 gpm (1 L/min), T-9A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Air-Operated Pilot Directional Valve
  • Capacity: .25 gpm (1 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-9A
Valve function
Air-Operated Pilot Directional Valve
Series (frame sizes)
P
Cavity
T-9A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A small spool valve shifted by compressed air against a return spring. It fits the T-8A pilot cavity, so it can sit in the end of a Sun main-stage or vent-to-operate cartridge and control it from a pneumatic signal.

This version

  • Pilot capacity: sized to switch pilot flows to larger valves, not main flows.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DBAP — series P, T-9A cavity, .25 gpm (1 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series P parts are pilot cartridges for the small T-8A and T-9A pilot cavities, many of which sit in the end of a larger Sun main stage.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)

Configuration options

The letters after the base model code choose these options (shown for DBAP; a size may add or drop a choice):

  • Control: E — External 4-SAE Port, F — External 1/8 NPTF Port, P — External 1/8 BSPP Port
  • Spool / poppet configuration: C — Normally Open 1 to 3, Closed 1 to 2, H — Normally Open 1 to 2, Closed 1 to 3
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Material / coating: /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /LH, the control must be E, F or P; If the seal is E, the control must be E,F or P.

Selection notes

  • Minimum air pressure to shift is 20 psi plus 1/100 of the pressure at port 1 — about 20 to 70 psi (1.4 to 5 bar).
  • Torque the main stage in first, then this pilot into it.

Where it is used

Hydraulic functions controlled from pneumatic panels or air logic, and machines where electrics are unwanted.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series P: Buna: 990509007, Viton: 990509006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DBAPFCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionAir-Operated Pilot Directional Valve
Series (frame sizes)P
CavityT-9A

Performance

ParameterValue
Capacity.25 gpm (1 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage10 drops/min.@5000 psi (0,7 cc/min.@350 bar)

Configuration

ParameterValue
Control / adjustmentE — External 4-SAE Port, F — External 1/8 NPTF Port, P — External 1/8 BSPP Port; C — Normally Open 1 to 3, Closed 1 to 2, H — Normally Open 1 to 2, Closed 1 to 3
Seal materialN — Buna-N, V — Viton, E — EPDM
Material / coating/LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm)
Seal kitsseries P: Buna: 990509007, Viton: 990509006

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at